Panasonic DMC-FP5P / DMC-FP5PC / DMC-FP5PR / DMC-FP5PU / DMC-FP5EB / DMC-FP5EE / DMC-FP5EG / DMC-FP5GA / DMC-FP5GC / DMC-FP5GF / DMC-FP5GK / DMC-FP5GT Service Manual ▷ View online
37
38
9.4.
After Adjustment
9.4.1.
Initial Setting
Since the initial setting has been released to execute the built-in adjustment software, it should be set up again before shipping the
camera to the customer.
Refer to the procedure described in “3.4.2. INITIAL SETTINGS” for details.
camera to the customer.
Refer to the procedure described in “3.4.2. INITIAL SETTINGS” for details.
[ IMPORTANT ]
1. The initial setting should be done again after completing the alignment. Otherwise, the camera will not work properly.
Therefore as a warning, the camera display a warning symbol “ ! ” on the LCD monitor every time the camera is turned off.
2. Confirm that status of all adjustment flag show “F”. Even if one of the adjustment flag shows “0”, initial setting programmed is
never executed.
3. Adjustment software “DIAS” is able to control the status of the adjustment flags.
The Adjustment software “DIAS” is available at “TSN Website”, therefore, access to “TSN Website” at “Support Information
from NWBG/VDBG-AVC”.
from NWBG/VDBG-AVC”.
39
10 Maintenance
10.1. Cleaning Lens and LCD Panel
Do not touch the surface of lens and LCD Panel with your hand.
When cleaning the lens, use air-Blower to blow off the dust.
When cleaning the LCD Panel, dampen the lens cleaning paper with lens cleaner, and the gently wipe the its surface.
Note:
When cleaning the lens, use air-Blower to blow off the dust.
When cleaning the LCD Panel, dampen the lens cleaning paper with lens cleaner, and the gently wipe the its surface.
Note:
The Lens Cleaning KIT ; VFK1900BK (Only supplied as 10 set/Box) is available as Service Aid.
S-1
S1. About Indication of The Schematic Diagram ............................ S-1
S1.1. Important Safety Notice......................................................... S-1
S2. Block Diagram .......................................................................... S-2
S2.1. Overall Block Diagram .......................................................... S-2
S3. Schematic Diagram .................................................................. S-3
S3.1. Interconnection Diagram ....................................................... S-3
S3.2. Flash Schematic Diagram ..................................................... S-4
S3.3. Top Operation Schematic Diagram ....................................... S-5
S4. Print Circuit Board .................................................................... S-6
S4.1. Flash P.C.B. .......................................................................... S-6
S4.2. Top Operation P.C.B. ............................................................. S-7
S5. Replacement Parts List ............................................................ S-9
S6. Exploded View ....................................................................... S-14
S6.1. Frame and Casing Section.................................................. S-14
S6.2. Packing Parts and Accessories Section (1) ........................ S-15
S6.3. Packing Parts and Accessories Section (2) ........................ S-16
Table of contents
Service Manual
DSC1102014CE
Diagrams and Replacement
Parts List
Vol. 1
(A)...........Blue Type (only P/PC/PU/GK)
Colour
(G)...........Green Type (only PU)
(K)...........Black Type
(S)...........Silver Type (except PR/EB/EG)
(P)...........Pink Type (except PC/EB/EG)
Model No.
DMC-FP5P
DMC-FP5PC
DMC-FP5PR
DMC-FP5PU
DMC-FP5EB
DMC-FP5EE
DMC-FP5EG
DMC-FP5GA
DMC-FP5GC
DMC-FP5GF
DMC-FP5GK
DMC-FP5GT
Digital Camera
Name of Signal
OFTR
FEP
This signal is connected
to the FEP schematic diagram.
Circuit name being connected.
6.Use the parts number indicated on the Replacement Parts List .
7.Indication on Schematic diagrams:
7.Indication on Schematic diagrams:
5.The voltage being indicated here may be include observational-error (deviation) due to
internal-resistance and/or reactance of equipment. Therefore, handle the value
indicated on here as reference.
4.Although the voltage and waveform available on here is measured with standard frame,
it may be differ from actual measurement due to modification of circuit and so on.
3.The voltage being indicated on the schematic diagram is measured in
"Standard-Playback" mode when there is no specify mode is mentioned.
2.It is only the "Test Round" and no terminal (Pin) is available on the P.C.B.
when the TP (Test Point) indicated as " " mark.
1.Although reference number of the parts is indicated on the P.C.B. drawing and/or
schematic diagrams, it is NOT mounted on the P.C.B. when it is displayed with "$" mark.
FOR SAFETY. WHEN REPLACING ANY OF THESE COMPONENTS USE ONLY THE SAME TYPE.
COMPONENTS IDENTIFIED WITH THE MARK
HAVE THE SPECIAL CHARACTERISTICS
S1. About Indication of The Schematic Diagram
S1.1. Important Safety Notice
Click on the first or last page to see other DMC-FP5P / DMC-FP5PC / DMC-FP5PR / DMC-FP5PU / DMC-FP5EB / DMC-FP5EE / DMC-FP5EG / DMC-FP5GA / DMC-FP5GC / DMC-FP5GF / DMC-FP5GK / DMC-FP5GT service manuals if exist.