Panasonic WJ-HD500 Service Manual ▷ View online
– 5 –
ADJUSTMENT PROCEDURE
1. Test Equipments Required
8
The following Test Equipments are required for
adjustment of the Digital Disk Recorder WJ-HD500.
8
Digital Voltmeter
8
Frequency Counter
8
Waveform Monitor
8
Oscilloscope
8
Underscanned Colour Video Monitor
8
Video Signal Generator (Colour Bar Signal)
8
Ceramic Screwdriver
8
Extension Cable
A
(Part No. : V0EA1311AN) as shown in
Fig. 1-1.
Fig 1-1
8
Extension Cable
B
(Part No. : V0JA0010AN) as shown in
Fig. 1-2.
Fig 1-2
2. Disassembling Procedure for
Adjustment
8
Referring to Fig. 2-1, remove eleven screws that secure
the Top Cover and remove the Top Cover.
Fig. 2-1
8
Referring to Fig. 2-2, remove six screws that secure the
Main Board and disconnect CN403 on the Main Board.
Fig. 2-2
8
Referring to Fig. 2-3, turn over the Main Board with the
front side up.
Fig 2-3
8
Referring to Fig. 2-4, remove three screws that secure the
Motion Detector Board and remove the Motion Detector
Board.
Main Board
To Front Board CN403
To Main Board CN403
Analog Board CN501
Motion Detector Board CN601
Analog Board CN502
Motion Detector Board CN101
CN403
Remove six screws.
Main Board
Remove eleven screws.
Top Cover
DIP SWITCH SETTING OF
SCSI-IDE BOARD
SCSI-IDE BOARD
8
When replacing the SCSI-IDE Board, confirm that the #2,
#3 and #8 of Dip Switch (SW1) on the SCSI-IDE Board
are set to ON position as shown in Fig. 1.
Fig. 1
1 2 3 4 5 6 7 8
ON
OFF
SW1
– 6 –
Fig 2-4
8
Connect the Extension Cable
A
between CN403 on the
Main Board and CN403 on the Front Board.
8
Connect the Extension Cable
B
between CN501 on the
Analog Board and CN601 on the Motion Detector Board.
8
Connect the Extension Cable
B
between CN502 on the
Analog Board and CN101 on the Motion Detector Board.
3. Connection and Setting Up for
Adjustment
3.1. Connection
8
Fig. 3-1 shows the connecting diagram for adjustment of
the WJ-HD500.
Fig 3-1
8
Connect the Underscanned Colour Video Monitor through
the Waveform Monitor to the Multiscreen Output
Connector or Spot Output Connector on the Rear Panel of
the WJ-HD500.
8
Terminate the input terminal of the Underscanned Colour
Video Monitor with 75
Ω
.
8
Connect the Video Signal Generator to the Video Input
Connector on the Rear Panel of the WJ-HD500.
8
Connect the probe of the Oscilloscope, the Frequency
Counter and the Digital Voltmeter at the desired Test Point
in each adjustment step.
3.2. Setting Up
8
Turn on the power.
8
Press the Setup/Escape Button (SET UP/ESC) for two
seconds or more, and the WJ-HD500 SETUP menu as
shown in Fig. 3-2 will appear on the monitor screen.
Fig 3-2
8
Move the cursor to SYSTEM SETUP by pressing the
Direction Buttons (
D
or
C
), then press the Set Button
(SET). The SYSTEM SETUP menu as shown in Fig. 3-3
will appear on the monitor screen.
Fig 3-3
8
Move the cursor to USER DEFINED SETUP by pressing
the Direction Buttons (
D
or
C
).
8
Select SAVE by pressing the Increment/Decrement
Buttons (+ or –), then press the Set Button (SET). The
USER DEFINED SETUP menu as shown in Fig. 3-4 will
appear on the monitor screen.
VIDEO IN
MULTISCREEN
OUT
OUT
SPOT
OUT
WJ-HD500
Video Signal
Generator
Generator
Waveform
Monitor
Monitor
Underscanned
Colour Video Monitor
Colour Video Monitor
75
Ω
WJ-HD500 SETUP *.**
TIMER OFF
REC SETUP
COMMON SETUP
*MANUAL WITHOUT AUDIO
REC SETUP
COMMON SETUP
*MANUAL WITHOUT AUDIO
*TIMER WITHOUT AUDIO
*EMERGENCY WITHOUT AUDIO
MULTIPLEXER SETUP
ALARM SETUP
DISPLAY SETUP
COMMUNICATION SETUP
SYSTEM SETUP
DVD FORMAT
LANGUAGE ENGLISH
ALARM SETUP
DISPLAY SETUP
COMMUNICATION SETUP
SYSTEM SETUP
DVD FORMAT
LANGUAGE ENGLISH
9 SYSTEM SETUP
CLOCK JAN 1.00 0:00
TIME ADJUSTING OFF
SET TIME 0:00
AUTO KEY LOCK OFF
PASSWORD ALL *****
TIME ADJUSTING OFF
SET TIME 0:00
AUTO KEY LOCK OFF
PASSWORD ALL *****
OPERATION *****
BUZZER ON
USER DEFINED SETUP *LOAD
USER DEFINED SETUP *LOAD
DISK MANAGEMENT
ERROR REPORT
SYSTEM INFORMATION
SYSTEM INFORMATION
Remove three screws.
Main Board
Motion Detector
Board
Board
Analog Board
– 7 –
Fig 3-4
8
Select YES by pressing the Direction Buttons (
A
or
B
),
then press the Set Button (SET) to save the current
setting conditions.
8
When the saving is completed, press the Setup/Escape
Button (SET UP/ESC) then the display will return to the
SYSTEM SETUP menu as shown in Fig. 3-3.
8
Press the Setup/Escape Button (SET UP/ESC) to return to
the WJ-HD500 SETUP menu as shown in Fig. 3-5.
Fig 3-5
8
Move the cursor to TIMER by pressing the Direction
Buttons (
D
or
C
).
8
Select INT by pressing the Increment/Decrement Buttons
(+ or –) as shown in Fig. 3-5.
8
Move the cursor to REC SETUP/COMMON SETUP by
pressing the Direction Buttons (
D
or
C
), then press the
Set Button (SET).
8
The COMMON REC SETUP menu as shown in Fig. 3-6
will appear on the monitor screen.
Fig 3-6
8
Move the cursor to CAMERA ASSIGNMENT by pressing
the Direction Buttons (
D
or
C
), then press the Set Button
(SET). The GROUP SETUP (CAMERA ASSIGNMENT)
menu as shown in Fig. 3-7 will appear on the monitor
screen.
Fig 3-7
8
Move the cursor to the Group editing area for the CAM 1
by pressing the Direction Buttons (
D
or
C
).
8
Set the Group Number to 1 by pressing the
Increment/Decrement Buttons (+ or –) as shown in Fig. 3-7.
8
Set the Group Number of the rest of Cameras to the
number other than 1 by the same procedure as above.
8
Press the Setup/Escape Button (SET UP/ESC) twice to
return to the WJ-HD500 SETUP menu as shown in Fig. 3-
5.
8
Move the cursor to REC SETUP/TIMER by pressing the
Direction Buttons (
D
or
C
).
8
Select
WITHOUT AUDIO
by pressing the
Increment/Decrement Buttons (+ or –), then press the Set
Button (SET). The TIMER REC SETUP menu as shown
in Fig. 3-8 will appear on the monitor screen.
Fig 3-8
8
Move the cursor to the Program editing area of SUNDAY
in the menu by pressing the Direction Buttons (
D
or
C
).
8
Set the Program Timer to --- (OFF) by pressing the
Increment/Decrement Buttons (+ or –) as shown in Fig. 3-8.
8
Set the Program Timer of MONDAY - SATURDAY to ---
(OFF) by the same procedure as above.
8
Move the cursor to the Program editing area of DAILY in
the menu by pressing the Direction Buttons (
D
or
C
).
WJ-HD500 SETUP 1.00
TIMER INT
REC SETUP
COMMON SETUP
*MANUAL WITH AUDIO
REC SETUP
COMMON SETUP
*MANUAL WITH AUDIO
*TIMER WITH AUDIO
*EMERGENCY WITH AUDIO
MULTIPLEXER SETUP
ALARM SETUP
DISPLAY SETUP
COMMUNICATION SETUP
SYSTEM SETUP
DVD FORMAT
ALARM SETUP
DISPLAY SETUP
COMMUNICATION SETUP
SYSTEM SETUP
DVD FORMAT
1 COMMON REC SETUP
REC QUALITY
FIELD/FRAME FIELD
COLOR MODE COLOR STD
GROUP SETUP
CAMERA ASSIGNMENT
TITLE
TITLE EMBEDDED OFF
TIME EMBEDDED OFF
THUMBNAIL 8
PLAYBACK MODE ALL
HDD DISKEND STOP
FIELD/FRAME FIELD
COLOR MODE COLOR STD
GROUP SETUP
CAMERA ASSIGNMENT
TITLE
TITLE EMBEDDED OFF
TIME EMBEDDED OFF
THUMBNAIL 8
PLAYBACK MODE ALL
HDD DISKEND STOP
1-1 GROUP SETUP(CAMERA ASSIGNMENT)
CAM GROUP CAM GROUP
1 1 9 4
2 4 10 4
3 4 11 4
4 4 12 4
5 4 13 4
6 4 14 4
7 4 15 4
8 4 16 4
1 1 9 4
2 4 10 4
3 4 11 4
4 4 12 4
5 4 13 4
6 4 14 4
7 4 15 4
8 4 16 4
3 TIMER REC SETUP(WITHOUT AUDIO)
PROGRAM
SUNDAY ---
MONDAY ---
TUESDAY ---
WEDNESDAY ---
THURSDAY ---
FRIDAY ---
SATURDAY ---
DAILY PROG1
SUNDAY ---
MONDAY ---
TUESDAY ---
WEDNESDAY ---
THURSDAY ---
FRIDAY ---
SATURDAY ---
DAILY PROG1
TIMER SPECIAL DAY
EXT REC MODE PROG1
9-2 USER DEFINED SETUP
SAVE USER DEFINED SETUP
YES NO
[SET]:EXECUTE
– 8 –
8
Set the Program Timer to PROG1 by pressing the
Increment/Decrement Buttons (+ or –) as shown in Fig. 3-8.
8
Press the Set Button (SET), and the PROG1 setting menu
as shown in Fig. 3-9 will appear on the monitor screen.
Fig 3-9
8
Move the cursor to the START time editing area of NO.1
by the Direction Buttons (
A
,
B
,
D
or
C
).
8
Set the time to start the recording to 0:00 by the
Increment/Decrement Buttons (+ or –) as shown in Fig. 3-9.
8
Move the cursor to the END time editing area of NO.1 by
the Direction Buttons (
A
or
B
).
8
Set the time to end the recording to 24:00 by the
Increment/Decrement Buttons (+ or –) as shown in Fig 3-9.
8
Move the cursor to the Recording Mode editing area for
Group 2 (G2) by pressing the Direction Buttons (
A
or
B
).
8
Set the Recording Mode to – (disable) by pressing the
Increment/Decrement Buttons (+ or –) as shown in Fig. 3-9.
8
Set the Recording Mode of Group 3 (G3) and Group 4
(G4) to – (disable) by the same procedure as above.
8
Move the cursor to the Recording Mode editing area for
Group 1 (G1) by pressing the Direction Buttons (
A
or
B
).
8
Set the Recording Mode to M/S by pressing the
Increment/Decrement Buttons (+ or –) as shown in Fig. 3-9.
8
Press the Set Button (SET), and the M/S setting menu as
shown in Fig. 3-10 will appear on the monitor screen.
Fig 3-10
8
Move the cursor to the REC RATE in the menu by
pressing the Direction Buttons (
D
or
C
).
8
Set the Recording Rate to 15FPS by pressing the
Increment/Decrement Buttons (+ or –) as shown in Fig. 3-
10.
8
Move the cursor to the PRE PICTURES by pressing the
Direction Buttons (
D
or
C
).
8
Set the number of the pre-recording image to the value
other than 0 by pressing the Increment/Decrement
Buttons (+ or –) as shown in Fig. 3-10.
8
Press the Setup /Escape Button (SET UP/ESC) three
times to return to the WJ-HD500 SETUP menu as shown
in Fig. 3-5.
8
Move the cursor to ALARM SETUP by pressing the
Direction Buttons (
D
or
C
), then press the Set Button
(SET). The ALARM SETUP menu as shown in Fig. 3-11
will appear on the monitor screen.
Fig 3-11
8
Move the cursor to VIDEO LOSS by pressing the
Direction Buttons (
D
or
C
).
8
Select OFF by pressing the Increment/Decrement Buttons
(+ or –) as shown in Fig. 3-11.
8
Move the cursor to VIDEO MOTION DETECTION by
pressing the Direction Buttons (
D
or
C
).
8
Select OFF by pressing the Increment/Decrement Buttons
(+ or –) as shown in Fig. 3-11.
8
Press the Setup/Escape Button (SET UP/ESC) for two
seconds or more to close the setup menu and to return to
the normal screen.
8
Confirm that the Yellow LED of Numeric Button 1 only
lights up.
3-1-1-1 PROG1-NO1-G1 REC SETUP
M/S(EVENT RECORDER MULTI SHOT)
REC MODE
REC RATE 15FPS
QUALITY SUPER FINE
PRE PICTURES 15
POST PICTURES 60
DYNAMIC REC OFF
REC RATE 15FPS
QUALITY SUPER FINE
PRE PICTURES 15
POST PICTURES 60
DYNAMIC REC OFF
6 ALARM SETUP
ALARM TERMINAL SETUP
AUTO RESET OFF
ALARM OUTPUT 2S
ALARM BUZZER 2S
VIDEO LOSS OFF
VIDEO MONITOR DETECTION OFF
VMD AREA SETUP
AUTO RESET OFF
ALARM OUTPUT 2S
ALARM BUZZER 2S
VIDEO LOSS OFF
VIDEO MONITOR DETECTION OFF
VMD AREA SETUP
ALARM MODE MULTI OUTPUT SPOT
SPOT OUTPUT SPOT
SPOT OUTPUT SPOT
3-1 PROG1(WITHOUT AUDIO)
NO START END G1 G2 G3 G4
1 0:00 24:00 M/S - - -
RATE 7.5 7.5 1 10
2 -:-- -:-- M/S - O/S O/S
RATE 10 5 1
3 -:-- -:-- M/S M/S M/S M/S
RATE 5 2 2 5
4 -:-- -:-- O/S M/S - M/S
RATE 15 10 10
1 0:00 24:00 M/S - - -
RATE 7.5 7.5 1 10
2 -:-- -:-- M/S - O/S O/S
RATE 10 5 1
3 -:-- -:-- M/S M/S M/S M/S
RATE 5 2 2 5
4 -:-- -:-- O/S M/S - M/S
RATE 15 10 10
SET TOTAL REC RATE ON EACH TABLE
G1+G2+G3+G4= UNDER 30FPS
G1+G2+G3+G4= UNDER 30FPS
Click on the first or last page to see other WJ-HD500 service manuals if exist.