Panasonic BL-C140CE / BL-C140E / BL-C160CE / BL-C160E Service Manual ▷ View online
21
BL-C140CE/BL-C140E/BL-C160CE/BL-C160E
7.3.
Power LED Does Not Light Green
22
BL-C140CE/BL-C140E/BL-C160CE/BL-C160E
7.4.
Other Problem
7.4.1.
Other Problem 1 (Human detection sensor does not operate) (BL-C160 only)
Check the following settings.
[Setup]
[Setup]
→[Buffer/Transfer:Triger]
Status:ON
Trigger:Sensor
Trigger:Sensor
"Turn indicator on during pyroelectric sensor reaction." is selected on [Setup]
→[Indicator] screen.
If a sensor reacts, PowerLED turn on an orange.
If the sensor doesn't react
1. Wipe the human detection sensor lens clean.
2. Replace the CPU board.
2. Replace the CPU board.
For other software trouble, refer to the operating instructions.
For trouble resulting from setup, refer to the setup instructions.
For trouble resulting from setup, refer to the setup instructions.
23
BL-C140CE/BL-C140E/BL-C160CE/BL-C160E
7.4.2.
Other Problem 2 (LED light) (BL-C160 only)
If the LED light does not light normally when human detection sensor is detected with the preceding item, replace the CPU board,
LED board, and LED lead.
LED board, and LED lead.
If “OFF” is selected at [Setup]
→[Ligth], the LED light does not light .
If (1)”when dark” is selected and LED light doesn’t light even though it becomes dark
1. If light strikes the brightness sensor when it becomes dark, the LED light may not light in some cases.
2. If the LED light doesn't light when artificially dark, replace the CPU board.
3. If the lens cover near the brightness sensor is dirty, the LED light may light even if it is not dark.
2. If the LED light doesn't light when artificially dark, replace the CPU board.
3. If the lens cover near the brightness sensor is dirty, the LED light may light even if it is not dark.
Wipe the lens cover clean.
*Power is supplied to the sensor camera from the power unit via LAN cable.
When the LED light is lit, if the length of the LAN cable from the power unit to the network camera is 30 meters or more, the follow-
ing will occur. If so, shorten the LAN cable.
When the LED light is lit, if the length of the LAN cable from the power unit to the network camera is 30 meters or more, the follow-
ing will occur. If so, shorten the LAN cable.
• LED light doesn't light.
• Reset the instant the LED light lights.
• Reset the instant the LED light lights.
24
BL-C140CE/BL-C140E/BL-C160CE/BL-C160E
7.4.3.
Other Problem 3 (Self-Diagnosis)
The following is an explanation of how to troubleshoot by checking the self-diagnosis results of the camera if the power LED flashes
red.
Refer to the self-diagnosis item of [Maintenance]
red.
Refer to the self-diagnosis item of [Maintenance]
→[Status].
If the various digits of self-diagnosis are other than "0," the following causes are possible.
AABB-CCDD-EEFF-GGHH-IIJJ-KKLL-MMNN-OOPP-QQ
AA System
BB FLASH(IC102)
CC Reserve
DD CPU(Pegasus)(IC101)
EE RTC(IC3)
FF Reserve
GG Reserve
HH CAMERA (IC201)
II Reserve
JJ Reserve
KK I2C(IC3, IC101, IC201)
LL PHY(IC171)
MM MAC(IC101)
NN Reserve
OO Reserve
PP Reserve
QQ Reserve
AABB-CCDD-EEFF-GGHH-IIJJ-KKLL-MMNN-OOPP-QQ
AA System
BB FLASH(IC102)
CC Reserve
DD CPU(Pegasus)(IC101)
EE RTC(IC3)
FF Reserve
GG Reserve
HH CAMERA (IC201)
II Reserve
JJ Reserve
KK I2C(IC3, IC101, IC201)
LL PHY(IC171)
MM MAC(IC101)
NN Reserve
OO Reserve
PP Reserve
QQ Reserve
Click on the first or last page to see other BL-C140CE / BL-C140E / BL-C160CE / BL-C160E service manuals if exist.