Panasonic BL-C140CE / BL-C140E / BL-C160CE / BL-C160E Service Manual ▷ View online
17
BL-C140CE/BL-C140E/BL-C160CE/BL-C160E
*1 Understanding the Camera Indicator
The camera’s indicator lights as follows according to the status of the camera. Understanding how and when the indicator lights
can help you troubleshoot problems with the camera.
can help you troubleshoot problems with the camera.
Camera Status or Operation
Indicator Color and Pattern
Normal Operation
Green
When power is turned on (camera is starting up)
Orange
→Flashing orange
Obtaining IP address via DHCP
Flashing green
LAN cable not connected or no LAN connection
Orange
Automatic Setup
In progress
Flashing green
Completed
Green
Updating firmware
Flashing orange
Factory reset (by software or by pressing the FACTORY DEFAULT
RESET button)
RESET button)
Flashing orange
→Off→(The camera restarts)
UPnP
TM
port forwarding error
Flashing orange (2-second intervals)
SD memory card is damaged, write-protected, or not formatted prop-
erly
erly
Red
Camera failure
Flashing red
18
BL-C140CE/BL-C140E/BL-C160CE/BL-C160E
6 Installation Instructions
6.1.
Connections
Connect the camera to your router and to the power outlet as described below.
• Before proceeding, confirm that your PC is connected to your router and can access the Internet.
Also confirm that your router's UPnP™ feature is enabled. (Most routers have UPnP™ turned off by default.)
*Use a LAN cable that is no more than 30 m (98 feet 5 inches) long to connect the camera and the power transfer unit.
19
BL-C140CE/BL-C140E/BL-C160CE/BL-C160E
7 Troubleshooting Guide
7.1.
Setup Operation
20
BL-C140CE/BL-C140E/BL-C160CE/BL-C160E
7.2.
Check Board Voltages
Click on the first or last page to see other BL-C140CE / BL-C140E / BL-C160CE / BL-C160E service manuals if exist.