DOWNLOAD Panasonic SC-ZT1EE / SU-ZT1EE / SB-ZT1EE Service Manual ↓ Size: 19.75 MB | Pages: 127 in PDF or view online for FREE

Model
SC-ZT1EE SU-ZT1EE SB-ZT1EE
Pages
127
Size
19.75 MB
Type
PDF
Document
Service Manual / Other
Brand
Device
Audio / HOME THEATER AUDIO SYSTEM
File
sc-zt1ee-su-zt1ee-sb-zt1ee.pdf
Date

Panasonic SC-ZT1EE / SU-ZT1EE / SB-ZT1EE Service Manual / Other ▷ View online

9
5 Specifications
5.1.
Main Unit (SU-ZT1)
5.2.
Speaker Unit (SB-ZT1)
Q
 PRE AMPLIFIER SECTION
Input sensitivity / Input Impedance
TV, AUX3
600 mV / 47 k
Ω
S/N ratio (IHF A)
BD/DVD, TV, AUX1, AUX2 (Digital 
Input)
80 dB (IHF ‘66)
Tone controls
BASS
50 Hz, +6 to -6 dB
TREBLE
20 kHz, +6 to -6 dB
Input / Output terminal
Audio Input
Analogue Input (TV, AUX3)
2
Optical Digital Input (TV, AUX2)
2
Audio Output
Audio Output (Front L/R, Surround 
L/R)
4
Subwoofer Output
1
Headphone Output (16 to 64 
Ω)
1
Video/Audio
HDMI Input (BD/DVD, AUX1)
2
HDMI Output (TV)
1
This system supports “HDAVI Control 4” function.
Q
 MAIN UNIT GENERAL
Power supply
AC 110 to 240 V, 50/60 Hz
Power consumption
16 W
In standby condition
0.5 W
In standby condition (HDMI off 
mode)
0.2 W
Dimensions (WxHxD)
430mm x 59mm x 262mm
Mass
Approx. 2 kg
Operating temperature range
0
°C to 40°C
Operating humidity range
20% to 80% RH (no condensa-
tion)
Q
 WIRELESS SECTION
Frequency of the using band
2.4000 GHz to 2.4835 GHz
Number of using channels
3
The reaching distance
15m*1
*1 It is under the condition as follows. 
At same room indoor, there is not an obstacle between the main unit 
and the speaker.
And installing a main unit in the position with equal to or more than 50 
cm height.
Q
 POWER AMPLIFIER SECTION*2
RMS output power (at AC 220 to 240 V)
10% total harmonic distortion
Woofer Speaker ch
60 W (100 Hz, 3 
Ω)
Mid High Speaker ch
20 W (1 kHz, 8 
Ω)
System Total Power*3
160 W (80 W + 80 W)
DIN output power (at AC 220 to 240 V)
1.0% total harmonic distortion
100Hz Woofer Speaker ch
40 W (3 
Ω)
1kHz Mid High Speaker ch
15 W (8 
Ω)
System Total Power*3
110 W (55 W + 55 W)
Q
 SPEAKER SECTION*2
2 way 5 speakers system (Bass reflex type)
Woofer part
12 cm cone type x 1
Mid High part
2.4 x 10 cm flat type x 4
Q
 SPEAKER GENERAL*2
Power supply
AC 110 to  240 V, 50/60 Hz
Power consumption
20 W
Wireless link standby
0.8 W
In standby condition
0.15 W
Dimensions (WxHxD)
290mm x 1231mm x 290mm
Mass
Approx. 3.9 kg
Operating temperature range
0
°C to 40°C
Operating humidity range
20% to 80% RH (no condensa-
tion)
*2 : per 1 speaker
*3 : use 2 speakers
Note:
1. Specifications are subject to change without notice.
2. Total harmonic distortion is measured by the digital spectrum ana-
lyzer.
3. Total harmonic distortion is measured by using AES17 filter.
Q
 System : SC-ZT1EE-S
Music center: SU-ZT1EE-K
Speaker: SB-ZT1EE-S1
10
6 Speaker setting (SB-ZT1)
6.1.
Setting the speakers
11
12
6.2.
Initialize the Speaker Setting
AC IN 
TEST
ID
Pole 
(mid-high part)
Base
(woofer part)
AC inlet
TEST
terminal
[WIRELESS LINK] 
indicator
ID switch
For switching the speaker 
“ON/OFF”
Front view
Side view
About the method of initializing the setting of the speaker.
Please initialize it when the main body of the speaker is changed or it added.
Please set the speaker after ID is reset.
Preparation:
  Please connect the power supply code of the speaker.
  Please confirm the power supply of the speaker cuts.
1. It keeps pushing the power switch for about five seconds with ID switch pushed.
    (ID is reset.)
2. Please turn off power of the speaker.
Page of 127
Display

Click on the first or last page to see other SC-ZT1EE / SU-ZT1EE / SB-ZT1EE service manuals if exist.