Panasonic SC-HTX5EB / SC-HTX5EG / SU-HTX5EB / SU-HTX5EG Service Manual ▷ View online
29
Step 2 : Remove 4 screws.
Step 3 : Slightly lift up the Amp Unit at the dotted line area .
Step 4 : Remove 2 Amp Fixtures.
Step 4 : Remove 2 Amp Fixtures.
30
Step 5 : Cut the 4 wire clampers at the ferrite cores.
Caution : During assembly of the Amp Unit into the Rack Unit, ensure that the connector cables are bound to the Front
Caution : During assembly of the Amp Unit into the Rack Unit, ensure that the connector cables are bound to the Front
Shield by the 4 wire clampers at the ferrite cores.
31
Step 6 : Pull out the Amp Unit and release the 2 wire clampers on both sides.
Caution : During assembly of the Amp Unit into the Rack Unit, ensure that the connector cables are clamped by the wire
Caution : During assembly of the Amp Unit into the Rack Unit, ensure that the connector cables are clamped by the wire
clampers at the both sides.
32
Step 7 : Detach 10P cable at the connector (CN4251) on the Relay(W) P.C.B.
Step 8 : Detach 8P cable at the connector (CN4252) on the Relay(W) P.C.B.
Step 9 : Detach 14P cable at the connector (CN4601) on the Relay(P) P.C.B.
Step 10 : Remove the Amp Unit.
Step 8 : Detach 8P cable at the connector (CN4252) on the Relay(W) P.C.B.
Step 9 : Detach 14P cable at the connector (CN4601) on the Relay(P) P.C.B.
Step 10 : Remove the Amp Unit.
Click on the first or last page to see other SC-HTX5EB / SC-HTX5EG / SU-HTX5EB / SU-HTX5EG service manuals if exist.