Panasonic SC-HC4EP Service Manual ▷ View online
29
9.7.
Disassembly of Bottom Orna-
ment
ment
• Follow the (Step 1) - (Step 4) of item 9.5.
Step 1 : Remove 4 screws.
Step 2 : Gently release the 4 catches on the Bottom Ornament.
Caution : Take extra care not to damage the Bottom Orna-
Caution : Take extra care not to damage the Bottom Orna-
ment during disassembling.
Step 3 : Remove the Bottom Ornament.
30
9.8.
Disassembly of Speaker Unit
(SP1)
(SP1)
• Follow the (Step 1) - (Step 4) of item 9.5.
• Follow the (Step 1) - (Step 3) of item 9.6.
• Follow the (Step 1) - (Step 3) of item 9.7.
• Follow the (Step 1) - (Step 3) of item 9.6.
• Follow the (Step 1) - (Step 3) of item 9.7.
Step 1 : Remove 5 screws.
Step 2 : Using a flathead screwdriver, apply gentle force at the
4 holes in the Front Speaker Assembly (L) in order show to
detach it from the Main Unit as arrows shown.
4 holes in the Front Speaker Assembly (L) in order show to
detach it from the Main Unit as arrows shown.
Step 3 : Place the Front Speaker Assembly (L) on a support
block as shown.
block as shown.
Caution : During assembling of the Front Speaker Assem-
bly (L), insert the speaker wires into the hole in the Front
Speaker Assembly (L).
31
Step 4 : Remove 4 screws.
Step 5 : Desolder the speaker terminals of the red (+) and
black (-) speaker wires.
Step 6 : Remove Speaker unit (SP1).
black (-) speaker wires.
Step 6 : Remove Speaker unit (SP1).
9.9.
Disassembly of Speaker Unit
(SP2)
(SP2)
• Follow the (Step 1) - (Step 4) of item 9.5.
• Follow the (Step 1) - (Step 3) of item 9.6.
• Follow the (Step 1) - (Step 3) of item 9.7.
• Follow the (Step 1) - (Step 3) of item 9.6.
• Follow the (Step 1) - (Step 3) of item 9.7.
Step 1 : Remove 5 scews.
Step 2 : Using a flathead screwdriver, apply gentle force at the
4 holes in the Front Speaker Assembly (R) to detach it from the
Main Unit as arrows shown.
4 holes in the Front Speaker Assembly (R) to detach it from the
Main Unit as arrows shown.
32
Step 3 : Place the Front Speaker Assembly (R) on a support
block as
shown.
block as
shown.
Caution : During assembling of the Front Speaker Assem-
bly (R), insert the speaker wires into the hole in the Front
Speaker Assembly (R).
Step 4 : Remove 4 screws.
Step 5 : Desolder the speaker terminals of the red (+) and
black (-) speaker wires.
Step 6 : Remove Speaker unit (SP2).
black (-) speaker wires.
Step 6 : Remove Speaker unit (SP2).
Click on the first or last page to see other SC-HC4EP service manuals if exist.