DOWNLOAD Panasonic SC-HC4EP Service Manual ↓ Size: 18.06 MB | Pages: 127 in PDF or view online for FREE

17

Mecha Sliding Panel 
Reliability

To check the operation of 
sliding Panel.
Sequence as follow :

1. Panel set to centre 

position.

2. CD Open & stop at left 

position for 1s.

3. CD Close & stop at 

centre position for 1s.

4. iPod open & stop at 

right position for 1s.

5. iPod close & stop at 

centre position for 1s.

In Doctor Mode:

1. Press [

] follow by [2] & then 

[1] button on remote control.

To cancel, press [0] button on remote 
control.

To exit Doctor Mode, press 

 but-

ton on main unit or remote control.

18

Self-Diagnosis Function provides information on any problems occuring for the unit and its respective components by displaying
error codes. Thesed error code such as U**, H** and F** are stored in memory and held unless it is cleared. 
The error code is automatically display after entering into self-diagnostic mode.

CD H15

CD Open Abnormal

During operation 
POS_SW_R On fail to be 
detected with 3 sec. Error 
No. shall be clear by force 
or during cold start.

For CD Mechanism Unit
Press [Q] on main unit for 
next error.

CD H16

CD Closing Abnormal

During operation 
POS_SW_CEN On fail to 
be detected with 3 sec. 
Error No. shall be clear by 
force or during cold start.

For CD Mechanism Unit
Press [Q] on main unit for 
next error.

IPD H15

iPod Open Abnormal

During operation 
POS_SW_L On fail to be 
detected with 3 sec. Error 
No. shall be clear by force 
or during cold start.

For iPod
Press [Q] on main unit for 
next error.

IPD H16

iPod Closing Abnormal

During operation 
POS_SW_CEN On fail to 
be detected with 3 sec. 
Error No. shall be clear by 
force or during cold start.

For iPod
Press [Q] on main unit for
next error.

F15

CD REST SW Abnormal

CD traverse position intial 
setting operation failsafe 
counter (10 s) waiting  for 
REST SW to turn on.  Error 
No. shall be clear by force 
or during cold start.

For CD Mechanism Unit
Press [Q] on main unit for
next error.

F26

Communication between 
CD servo LSI and micro-p 
abnormal.

During switch to CD func-
tion, if SENSE = “L” within 
failsafe time of 20ms.

For CD Mechanism Unit
Press [Q] on main unit for
next error.

F61/F76

Power Amp IC output 
abnormal

During power-on, PDET1, 
PDET2 & MAINV_DET / 
TEMP_DET is “L” after 1 
sec.

For power.
Press [Q] on main unit for 
next error.

19

Step 1 : Insert a flathead screwdriver into the hole behind the
CD Door Unit and push the gear fixture from point A to B.

Step 2 : Push the CD Door Unit as arrow shown until the CD is
fully in sight.
Step 3 : Remove the CD.

20

Step 1 : Insert a flathead screwdriver into the hole behind the
CD Door Unit and push the gear fixture from point B to A.

Step 2 : Push the CD Door Unit as arrow shown until the iPod
is fully in sight.
Step 3 : Remove the iPod.