Panasonic SC-HC17EB / SC-HC17EC / SC-HC17EE / SC-HC17EG Service Manual ▷ View online
65
Step 9 : Check and repair the Panel P.C.B. according to the
diagram shown.
diagram shown.
11.2. Checking & Repairing of SMPS
P.C.B.
Step 1 : Remove the Net Frame Assembly (L) & (R).
Step 2 : Remove the Base Stand Assembly.
Step 3 : Remove the Front Cabinet Assembly.
Step 4 : Remove the SMPS P.C.B..
Step 5 : Place the SMPS P.C.B. on the Insulating Material.
Step 2 : Remove the Base Stand Assembly.
Step 3 : Remove the Front Cabinet Assembly.
Step 4 : Remove the SMPS P.C.B..
Step 5 : Place the SMPS P.C.B. on the Insulating Material.
Step 6 : Connect 7P extension cable (REX1538) from P1700
on the SMPS P.C.B. to CN1100 on the Main P.C.B..
on the SMPS P.C.B. to CN1100 on the Main P.C.B..
66
Step 7 : Connect 5P wire at the connector (CN6005) on Main
P.C.B..
P.C.B..
Step 8 : Check and repair the SMPS P.C.B. according to the
diagram shown.
diagram shown.
11.3. Checking & Repairing of CD
Servo P.C.B.
Note : Insert CD before Checking CD Servo P.C.B.
Step 1 : Remove the Net Frame Assembly (L) & (R).
Step 2 : Remove the Base Stand Assembly.
Step 3 : Remove the Front Cabinet Assembly.
Step 4 : Remove the CD Mechanism.
Step 5 : Place a Support Block to support the CD Mechanism
as shown.
Step 2 : Remove the Base Stand Assembly.
Step 3 : Remove the Front Cabinet Assembly.
Step 4 : Remove the CD Mechanism.
Step 5 : Place a Support Block to support the CD Mechanism
as shown.
67
Step 6 : Connect 30P extension cable (REE1712) from
CN6006 on the Main P.C.B. to CN7002 on the CD Servo
P.C.B..
CN6006 on the Main P.C.B. to CN7002 on the CD Servo
P.C.B..
Step 7 : Connect 5P wire at the connector (CN6005) on Main
P.C.B..
P.C.B..
Step 9 : Check and repair the CD Servo P.C.B. according to the
diagram shown.
diagram shown.
68
11.4. Checking & Repairing of Main
P.C.B. (Side B)
• Refer to (Step 1) - (Step 7) of item 11.3.
Step 1 : Check and repair the Main P.C.B. (Side B) according to
the diagram shown.
the diagram shown.
11.5. Checking & Repairing of Main
P.C.B. (Side A)
Step 1 : Remove the Net Frame Assembly (L) & (R).
Step 2 : Remove the Base Stand Assembly.
Step 3 : Remove the Front Cabinet Assembly.
Step 4 : Remove the CD Mechanism.
Step 5 : Remove 1 screw.
Step 2 : Remove the Base Stand Assembly.
Step 3 : Remove the Front Cabinet Assembly.
Step 4 : Remove the CD Mechanism.
Step 5 : Remove 1 screw.
Step 6 : Remove 2 screws.
Step 7 : Remove 1 screw.
Step 8 : Upset the unit.
Step 7 : Remove 1 screw.
Step 8 : Upset the unit.
Click on the first or last page to see other SC-HC17EB / SC-HC17EC / SC-HC17EE / SC-HC17EG service manuals if exist.