Panasonic SB-PF670GC Service Manual ▷ View online
Step 6: Detach the black (+) and yellow (-) wires.
Step 7: Detach the yellow, red (+) and black (-) wires.
Step 8: Remove speaker cabinet assy.
1.2. Disassembly of Tweeter (SP1)
• Follow (Step 1) to (Step 6) in item 1.1.
Step 1: Remove 4 screws.
Step 2: Remove tweeter (SP1).
4
SB-PF670GC
1.3. Disassembly of Woofer (SP2)
• Follow (Step 1) to (Step 5) and (Step 7) in item 1.1.
Step 1: Remove 4 screws.
Step 2: Remove woofer (SP2).
1.4. Disassembly of Tweeter
ornament
• Follow (Step 1) to (Step 5) in item 1.1.
• Follow (Step 1) in item 1.2.
• Follow (Step 1) in item 1.2.
Step 1: Remove tweeter ornament.
5
SB-PF670GC
1.5. Assembly of Tweeter
ornament
Step 1: Fix the tweeter ornament.
Note: Ensure the guides fix exactly to the holes.
Step 2: Support the tweeter ornament at the bottom.
Step 3: Fix 4 screws.
1.6. Assembly of Speaker unit
Step 1: Scrape off and clean up the remaining glue at the 4
bosses and 4 holes and replace with new glue.
bosses and 4 holes and replace with new glue.
Step 2: Press the front panel together with the speaker cabinet
assy.
assy.
Note: Ensure it is fixed tightly, check for gaps or openings in
between.
between.
6
SB-PF670GC
1.7. Disassembly of Connector
housing (White)
1.7.1. Disassembling
Step 1: Use a paper clip push the speaker wire head until it
hide inside the speaker connector housing.
hide inside the speaker connector housing.
Step 2: Pull out the red (+) and black (-) speaker wires.
1.7.2. Assembling
Cautions:
Follow the following procedure during assemble.
Step 1: Use a pen knife slightly push up the speaker wire head
approximately 45°.
approximately 45°.
Step 2: Insert the red (+) speaker wire into the (+) hole of the
connector housing.
connector housing.
Note: Push in the speaker wire until hear the “click” sound.
Step 3: Insert the black (-) speaker wire into the (-) hole of the
connector housing.
connector housing.
Note: Push in the speaker wire until hear the “click” sound.
7
SB-PF670GC