Panasonic SB-MAX700PH / SB-MAX700GS (serv.man2) Service Manual ▷ View online
10
Step 3 : Remove 2 screws.
Step 4 : Remove Corner Guard.
Step 5 : Remove 2 screws.
Step 6 : Remove 2 screws.
Step 6 : Remove 2 screws.
Step 7 : Detach the Lower Front Panel Assembly slightly as
arrow shown.
Caution : Do not exert strong force as it may damage the
wiring within.
Step 8 : Lift up the Himelon.
Caution : Replace the Himelon if they are torn during dis-
assembling.
arrow shown.
Caution : Do not exert strong force as it may damage the
wiring within.
Step 8 : Lift up the Himelon.
Caution : Replace the Himelon if they are torn during dis-
assembling.
11
Step 9 : Detach the 4P Wire Socket.
Step 10 : Remove the Lower Front Panel Assembly.
Step 10 : Remove the Lower Front Panel Assembly.
3.6.
Disassembly of Woofer
Speaker (SP2)
Speaker (SP2)
• Refer to “Disassembly of Upper Front Panel Assembly”.
• Refer to “Disassembly of Front Ornament Assembly”.
• Refer to “Disassembly of Front Ornament Assembly”.
Step 1 : Remove 8 screws.
Step 2 : Slightly lift up Woofer Speaker (SP2) as shown.
Step 3 : Detach the (+) and (-) speaker wires.
Step 3 : Detach the (+) and (-) speaker wires.
12
Step 4 : Remove the Woofer Speaker (SP2).
3.7.
Disassembly of Lighting Wire
P.C.B. Assembly
P.C.B. Assembly
• Refer to “Disassembly of Upper Front Panel Assembly”.
• Refer to “Disassembly of Front Ornament Assembly”.
• Refer to “Disassembly of Front Ornament Assembly”.
Step 1 : Remove 14 screws.
Step 2 : Remove 4 screws.
13
Step 3 : Slightly lift up Front Ornament Assembly.
Step 4 : Release the 4P wire from the hole of Lower Front
Panel Assembly.
Caution : During assembling, inserted the 4P wire into the
opening of Lower Front Panel Assembly as diagram
shown.
Step 4 : Release the 4P wire from the hole of Lower Front
Panel Assembly.
Caution : During assembling, inserted the 4P wire into the
opening of Lower Front Panel Assembly as diagram
shown.
Step 5 : Remove 4 screws.
Step 6 : Release the 4P wire from the slots.
Caution : During assembling, ensure that the 4P wire is
properly inserted into the slot.
Step 6 : Release the 4P wire from the slots.
Caution : During assembling, ensure that the 4P wire is
properly inserted into the slot.
Step 7 : Remove Lighting Wire P.C.B. Assembly.
Click on the first or last page to see other SB-MAX700PH / SB-MAX700GS (serv.man2) service manuals if exist.