Panasonic SB-MAX4000E / SB-MAX4000GS / SB-MAX4000PN / SB-MAX4000PS Service Manual ▷ View online
PSG1504010CE
Speaker System
Model No.
SB-MAX4000E
SB-MAX4000GS
SB-MAX4000PN
SB-MAX4000PS
SB-MAX4000GS
SB-MAX4000PN
SB-MAX4000PS
Product Color : (K)... Black Type
TABLE OF CONTENTS
PAGE
PAGE
1 Specifications ----------------------------------------------------- 2
2 Disassembly and Assembly Instructions ---------------- 2
2 Disassembly and Assembly Instructions ---------------- 2
2.1. Type of screws --------------------------------------------- 2
2.2. Disassembly of Upper Front Panel Block ----------- 3
2.3. Disassembly of Tweeter Speaker (SP1) ------------- 4
2.4. Disassembly of Woofer Speaker (SP2) -------------- 4
2.5. Disassembly of Lower Front Panel Block ----------- 5
2.6. Disassembly of Subwoofer Speaker (SP3) --------- 6
2.7. Disassembly of Lighting Wire P.C.B.
2.2. Disassembly of Upper Front Panel Block ----------- 3
2.3. Disassembly of Tweeter Speaker (SP1) ------------- 4
2.4. Disassembly of Woofer Speaker (SP2) -------------- 4
2.5. Disassembly of Lower Front Panel Block ----------- 5
2.6. Disassembly of Subwoofer Speaker (SP3) --------- 6
2.7. Disassembly of Lighting Wire P.C.B.
Assembly ---------------------------------------------------- 7
3 Wiring Connection Diagram ---------------------------------- 8
4 Exploded View and Replacement Parts List ------------ 9
4 Exploded View and Replacement Parts List ------------ 9
4.1. Cabinet Parts Location ----------------------------------- 9
4.2. Packaging-------------------------------------------------- 10
4.3. Replacement Parts List--------------------------------- 11
4.3. Replacement Parts List--------------------------------- 11
2
1 Specifications
2 Disassembly and Assembly Instructions
Caution Note:
• This section describes procedures for checking the operation and replacing the main components.
• For reassembly after operation checks or replacement, reverse the respective procedures.
• Special reassembly procedures are described only when required.
• Before carrying out the disassembly process, please ensure all the safety precautions & procedures are followed.
• During the disassembly and/or assembly process, please handle with care as there may be chassis components with sharp
• For reassembly after operation checks or replacement, reverse the respective procedures.
• Special reassembly procedures are described only when required.
• Before carrying out the disassembly process, please ensure all the safety precautions & procedures are followed.
• During the disassembly and/or assembly process, please handle with care as there may be chassis components with sharp
edges.
• During replacement of component parts, please refer to the section of “Replacement Parts List” as described in the service man-
ual.
• Select items from the following indexes when disassembly or replacement are required.
Front Speakers
• Disassembly of Upper Front Panel Block
• Disassembly of Tweeter Speaker (SP1)
• Disassembly of Woofer Speaker (SP2)
• Disassembly of Lower Front Panel Block
• Disassembly of Subwoofer Speaker (SP3)
• Disassembly of Lighting Wire P.C.B. Assembly
• Disassembly of Tweeter Speaker (SP1)
• Disassembly of Woofer Speaker (SP2)
• Disassembly of Lower Front Panel Block
• Disassembly of Subwoofer Speaker (SP3)
• Disassembly of Lighting Wire P.C.B. Assembly
2.1.
Type of screws
Speakers
Speaker unit(s)
Tweeter
Speaker unit(s)
Tweeter
6 cm cone type
Woofer
20 cm cone type
Super Woofer
30 cm cone type
Impedance
High 3
Ω / Mid 3 Ω / Low 2 Ω
Dimensions (W x H x D)
407 mm x 709 mm x 389 mm
Mass
19 kg
Notes:
1. Specifications are subject to change without notice.
Mass and dimensions are approximate.
2. Total harmonic distortion is measured by the digital spectrum ana-
lyzer.
1. Specifications are subject to change without notice.
Mass and dimensions are approximate.
2. Total harmonic distortion is measured by the digital spectrum ana-
lyzer.
3
2.2.
Disassembly of Upper Front
Panel Block
Panel Block
Step 1 : Remove 4 screws.
Step 2 : Insert flathead screwdriver into the grooves.
Step 3 : Insert a steel rule between the Upper Front Panel
Block and Speaker Cabinet.
Step 4 : Apply light force to push the Upper Front Panel Block.
Caution : Do not exert strong force as it may damage the
Upper Front Panel Block.
Step 5 : Detach Upper Front Panel Block.
Step 3 : Insert a steel rule between the Upper Front Panel
Block and Speaker Cabinet.
Step 4 : Apply light force to push the Upper Front Panel Block.
Caution : Do not exert strong force as it may damage the
Upper Front Panel Block.
Step 5 : Detach Upper Front Panel Block.
Step 6 : Detach speaker wire.
Step 7 : Remove Upper Front Panel Block.
Step 7 : Remove Upper Front Panel Block.
During assembling, please do following
Step 1 : Remove and clean up the bosses and holes.
Step 2 : Align the bosses of Upper Front Panel Block to the
holes of Speaker Cabinet.
Step 3 : Press the Upper Front Panel Block tightly.
Step 1 : Remove and clean up the bosses and holes.
Step 2 : Align the bosses of Upper Front Panel Block to the
holes of Speaker Cabinet.
Step 3 : Press the Upper Front Panel Block tightly.
4
2.3.
Disassembly of Tweeter
Speaker (SP1)
Speaker (SP1)
• Refer to “Disassembly of Upper Front Panel Block”
Step 1 : Remove 4 screws.
Step 2 : Remove Tweeter Speaker (SP1).
Step 2 : Remove Tweeter Speaker (SP1).
2.4.
Disassembly of Woofer
Speaker (SP2)
Speaker (SP2)
• Refer to “Disassembly of Upper Front Panel Block”
Step 1 : Remove 4 screws.
Step 2 : Slightly lift up Woofer Speaker (SP2).
Step 3 : Detach speaker wire.
Step 4 : Remove Woofer Speaker (SP2).
Step 3 : Detach speaker wire.
Step 4 : Remove Woofer Speaker (SP2).