Panasonic SB-FS1000E / SB-FC1000LE / SB-FC1000RE / SB-HS1000E / SB-WA1000E / SB-TP1000E Service Manual ▷ View online
6.3. SB-HS1000E-K (For surround
speaker)
6.3.1. Disassembly of Stand base
Note: This section is applicable if the complete speaker is sent
in together during repairs.
in together during repairs.
Step 1: Disconnect the speaker cable from the speaker
terminal.
terminal.
Step 2: Pull out the speaker cable from the groove.
Step 3: Pull out the speaker cable from the hole marked in the
back of the stand base.
back of the stand base.
Step 4: Remove the screw at the hole marked in the back of
the stand base.
Step 5: Remove the surround speaker from 2 projections of the
speaker stand.
speaker stand.
Step 6: Remove 2 screws at the holes marked in the back of
the stand base as shown.
the stand base as shown.
Step 7: Remove the stand base.
25
SB-FS1000E / SB-FC1000LE / SB-FC1000RE / SB-HS1000E / SB-WA1000E / SB-TP1000E
6.3.2. Disassembly of Main net frame
assembly
Step 1: Insert flathhead screwdriver into the gap between
surround speaker and main net frame assembly.
surround speaker and main net frame assembly.
Step 2: Push up the main net frame assembly slightly as arrow
shown.
shown.
Step 3: Lift up the main net frame assembly as arrow shown.
Step 4: Remove main net frame assembly.
Do not exert strong force as it may damage the main net frame
assembly.
assembly.
6.3.3. Disassembly of Front woofer
speaker 1 (SP2)
Follow (step 1) to (step 4) in Item 6.3.2.
Step 1: Remove 4 screws.
Step 2: Lift up the front woofer speaker 1 (SP2).
Step 3: Detach the (+) red and (-) red wires.
26
SB-FS1000E / SB-FC1000LE / SB-FC1000RE / SB-HS1000E / SB-WA1000E / SB-TP1000E
Step 4: Remove the front woofer speaker 1(SP2).
6.3.4. Disassembly of Tweeter speaker
(SP1)
Follow (step 1) to (step 4) in Item 6.3.2.
Step 1: Remove 4 screws.
Step 2: Lift up the tweeter speaker (SP1).
Step 3: Detach the (+) black and (-) yellow wires.
27
SB-FS1000E / SB-FC1000LE / SB-FC1000RE / SB-HS1000E / SB-WA1000E / SB-TP1000E
Step 4: Remove tweeter speaker (SP1).
6.3.5. Disassembly of Front woofer
speaker 2 (SP2)
Follow (step 1) to (step 4) in Item 6.3.2.
Step 1: Remove 4 screws.
Step 2: Lift up the front woofer speaker 2 (SP2).
Step 3: Detach the (+) red and (-) gray wires.
28
SB-FS1000E / SB-FC1000LE / SB-FC1000RE / SB-HS1000E / SB-WA1000E / SB-TP1000E
Click on the first or last page to see other SB-FS1000E / SB-FC1000LE / SB-FC1000RE / SB-HS1000E / SB-WA1000E / SB-TP1000E service manuals if exist.