Panasonic SA-XH155EE / SA-XH155GS / SC-XH155EE-K Service Manual ▷ View online
53
Step 3 Release 3P Wire from wall & rib of Front Panel.
Caution: During assembling, ensure that 3P Wire is prop-
erly dressed in between wall & ribs of Front Panel as dia-
gram shown.
Caution: During assembling, ensure that 3P Wire is prop-
erly dressed in between wall & ribs of Front Panel as dia-
gram shown.
Step 4 Desolder pins of the connector (H6003) on Operation
Button P.C.B..
Step 5 Remove the Operation Button P.C.B..
Button P.C.B..
Step 5 Remove the Operation Button P.C.B..
Caution: Replace the Himelon if torn.
10.9. Disassembly of Power Button
P.C.B.
• Refer to “Disassembly of Top Cabinet”.
• Refer to “Disassembly of Front Panel Block Assembly”.
• Refer to “Disassembly of Front Panel Block Assembly”.
Step 1 Remove 1 screw.
Step 2 Lift up the Power Button P.C.B. as direction of arrow.
54
Caution: During assembling, ensure that Power Button
P.C.B is properly inserted & fully fixed onto Front Panel.
P.C.B is properly inserted & fully fixed onto Front Panel.
Step 3 Release 3P Wire from wall & rib of Front Panel.
Caution: During assembling, ensure that 3P Wire is prop-
erly dressed in between wall & ribs of Front Panel as dia-
gram shown.
Caution: During assembling, ensure that 3P Wire is prop-
erly dressed in between wall & ribs of Front Panel as dia-
gram shown.
Step 4 Desolder pins of the connector (H6001) on Power But-
ton P.C.B..
Step 5 Remove the Power Button P.C.B..
ton P.C.B..
Step 5 Remove the Power Button P.C.B..
10.10. Replacement of Front Lid
Assembly
10.10.1. Disassembly of Front Lid Assembly
• Refer to “Disassembly of Top Cabinet”.
• Refer to “Disassembly of Front Panel Block Assembly”.
• Refer to “Disassembly of Front Panel Block Assembly”.
Step 1 Release the Front Lid Spring by using a flat head screw-
driver in the direction of arrow.
driver in the direction of arrow.
Step 2 Slightly open the Front Lid Assembly as diagram shown.
Step 3 Push and pull the Hole A out from the slot.
Step 3 Push and pull the Hole A out from the slot.
55
Step 4 Push to remove Front Lid Assembly in the direction of
arrow.
arrow.
10.10.2. Assembly of Front Lid Assembly
Step 1 Apply hanarl around the 5 shafts as shown in the dia-
gram.
gram.
Step 2 Locate Hole C of Front Lid Assembly into shaft of Front
Panel.
Step 3 Locate the rest of the holes into shafts of Front Panel.
Panel.
Step 3 Locate the rest of the holes into shafts of Front Panel.
Step 4 Push Front Lid Assembly to the end according to direc-
tion of arrow.
tion of arrow.
Step 5 Apply grease around the shafts of Front Panel & Front
Lid as diagram shown.
Lid as diagram shown.
56
Step 6 Fix the Front Lid Spring into the shaft.
Caution: Ensure that all holes of Front Lid Assembly are
fully inserted into Front Panel’s shafts.
fully inserted into Front Panel’s shafts.
10.11. Replacement of Cradle Orna-
ment
10.11.1. Disassembly of Cradle Ornament
Step 1 Release 5 catches.
Step 2 Remove Cradle Ornament from Front Panel.
10.11.2. Assembly of Cradle Ornament
Step 1 Fix Cradle Ornament into place.
Click on the first or last page to see other SA-XH155EE / SA-XH155GS / SC-XH155EE-K service manuals if exist.