Panasonic SA-XH155EE / SA-XH155GS / SC-XH155EE-K Service Manual ▷ View online
49
Caution : During assembling, ensure that iPhone Gasket is
properly inserted & fully fixed onto Bottom Chassis.
properly inserted & fully fixed onto Bottom Chassis.
Caution : During assembling, ensure that the catches of
Top Cabinet is inserted into Front Panel properly.
Top Cabinet is inserted into Front Panel properly.
10.4. Disassembly of Rear Panel
• Refer to “Disassembly of Top Cabinet”.
Step 1 Remove 10 screws.
Step 2 Remove 1 screw.
Step 2 Remove 1 screw.
Step 3 Release the tabs at both side of the Rear Panel in the
direction of arrow.
direction of arrow.
Step 4 Remove the Rear Panel.
50
10.5. Disassembly of Fan
• Refer to “Disassembly of Top Cabinet”
Step 1 Lift up the Wire Clamper.
Step 2 Detach the Fan connector (CN5401) on D-Amp P.C.B..
Step 3 Remove 2 screws.
Step 4 Lift up to remove Fan.
Step 4 Lift up to remove Fan.
10.6. Disassembly of Front Panel
Block Assembly
• Refer to “Disassembly of Top Cabinet”
Step 1 Detach 4P FFC at the connector (CN6001) on FL
P.C.B..
Step 2 Release 2 tabs at both side of the Front Panel Block
Assembly in the direction of arrow.
Caution: Do not exert strong force when releasing the tabs.
Assembly in the direction of arrow.
Caution: Do not exert strong force when releasing the tabs.
Step 3 Release 3 tabs at the Bottom Chassis.
51
Caution (1): Do not exert strong force when releasing the
tabs.
Caution (2): During assembling, ensure that Front Panel
Block Assembly is properly inserted & fully catched onto
Bottom Chassis.
tabs.
Caution (2): During assembling, ensure that Front Panel
Block Assembly is properly inserted & fully catched onto
Bottom Chassis.
Step 4 Detach the Front Panel Block Assembly.
Caution During assembling, ensure that 4P Cable, Cable
are properly dressed through slots of Bottom Chassis.
are properly dressed through slots of Bottom Chassis.
10.7. Disassembly of Panel P.C.B.
• Refer to “Disassembly of Top Cabinet”.
• Refer to “Disassembly of Front Panel Block Assembly”.
• Refer to “Disassembly of Front Panel Block Assembly”.
Step 1 Detach 28P FFC at the connector (P6001) on Panel
P.C.B..
Step 2 Remove 2 screws.
P.C.B..
Step 2 Remove 2 screws.
Step 3 Slightly lift up the Panel P.C.B..
Step 4 Remove the Panel P.C.B..
Step 4 Remove the Panel P.C.B..
52
Caution (1): During assembling, ensure that Panel P.C.B. is
properly located & fully seated onto Bottom Chassis
before screwing.
Caution (2): During assembling, ensure that Panel P.C.B. is
properly inserted under the rib of Bottom Chassis.
properly located & fully seated onto Bottom Chassis
before screwing.
Caution (2): During assembling, ensure that Panel P.C.B. is
properly inserted under the rib of Bottom Chassis.
10.8. Disassembly of Operation But-
ton P.C.B.
• Refer to “Disassembly of Top Cabinet”.
• Refer to “Disassembly of Front Panel Block Assembly”.
• Refer to “Disassembly of Front Panel Block Assembly”.
Step 1 Remove 2 screws.
Step 2 Lift up the Operation Button P.C.B. as direction of arrow.
Caution: During assembling, ensure that Operation Button
P.C.B is properly located & fully inserted under the rib of
Front Panel.
Caution: During assembling, ensure that Operation Button
P.C.B is properly located & fully inserted under the rib of
Front Panel.
Click on the first or last page to see other SA-XH155EE / SA-XH155GS / SC-XH155EE-K service manuals if exist.