Panasonic SA-VK950EE Service Manual ▷ View online
Step 2 Flip over the P.C.B..
Step 3 Desolder Power Amp IC IC5100.
Step 4 Remove the Power Amp IC.
Step 4 Remove the Power Amp IC.
Step 1 Remove 1 screw.
Step 2 Disconnect connector CN6701 at Mic P.C.B..
Step 3 Lift up the Mic P.C.B to remove it.
Step 4 Remove 6 screws.
Step 3 Lift up the Mic P.C.B to remove it.
Step 4 Remove 6 screws.
Replacement of Power Amp ICs (IC5200/ IC5300/ IC5400)
Repeat (Step 1) - (Step 4) of Item 11.11 for removal of IC5200/
IC5300/IC5400.
IC5300/IC5400.
Step 5 Release 2 catches.
Step 6 Remove Panel P.C.B..
Step 6 Remove Panel P.C.B..
11.13. Disassembly of Panel P.C.B., Mic P.C.B. & Tact Switch P.C.B.
· Follow the (Step 1) - (Step 2) of Item 11.4 - Disassembly of Top Cabinet
· Follow the (Step 1) - (Step 4) of Item 11.5 - Disassembly of CD/DVD Changer Unit
· Follow the (Step 1) - (Step 4) of Item 11.8 - Disassembly of Front Panel Unit
· Follow the (Step 1) - (Step 4) of Item 11.5 - Disassembly of CD/DVD Changer Unit
· Follow the (Step 1) - (Step 4) of Item 11.8 - Disassembly of Front Panel Unit
49
SA-VK950EE
11.13.1. Disassembly of Tact Switch P.C.B.
Step 7 Remove the Volume knob.
Step 8 Remove 6 screws..
Step 1 Detach FFC cable (CN971).
Step 2 Disconnect FFC cable (CN1001).
Step 3 Remove the 5 screws.
Step 2 Disconnect FFC cable (CN1001).
Step 3 Remove the 5 screws.
Step 1 Remove 2 screws.
11.13.2. Disassembly of Lid
Step 1 Lift the spring sideward.
Step 2 Remove Lid.
Note: Do not misplace the spring.
Note: Do not misplace the spring.
Step 4 Push the lever upward, and then open the cassette lid
ass’y (For DECK1 and DECK2).
ass’y (For DECK1 and DECK2).
Step 5 Tilt the cassette mechanism unit in the direction of
arrow (1), and then remove it in the direction of arrow (2).
Note: For disassembly of parts for deck mechanism unit,
refer to Section 11.18.
arrow (1), and then remove it in the direction of arrow (2).
Note: For disassembly of parts for deck mechanism unit,
refer to Section 11.18.
11.14. Disassembly of Deck mechanism unit
· Follow the (Step 1) - (Step 2) of Item 11.4 - Disassembly of Top Cabinet
· Follow the (Step 1) - (Step 4) of Item 11.5 - Disassembly of CD/DVD Changer Unit
· Follow the (Step 1) - (Step 4) of Item 11.8 - Disassembly of Front Panel Unit
· Follow the (Step 1) - (Step 4) of Item 11.5 - Disassembly of CD/DVD Changer Unit
· Follow the (Step 1) - (Step 4) of Item 11.8 - Disassembly of Front Panel Unit
11.15. Disassembly of Deck P.C.B.
· Follow the (Step 1) - (Step 2) of Item 11.4 - Disassembly of Top Cabinet
· Follow the (Step 1) - (Step 4) of Item 11.5 - Disassembly of CD/DVD Changer Unit
· Follow the (Step 1) - (Step 4) of Item 11.8 - Disassembly of Front Panel Unit
· Follow the (Step 1) - (Step 4) of Item 11.5 - Disassembly of CD/DVD Changer Unit
· Follow the (Step 1) - (Step 4) of Item 11.8 - Disassembly of Front Panel Unit
50
SA-VK950EE
Important notes: Ensure all the trays are in the “STOCK”
position before proceeding to the disassemble of traverse
unit. For procedures to set the trays in “STOCK” position,
please refer to original Service Manual for CRS1D, Section
4.3. Setting the trays in “STOCK” position, Order No.
MD0603065A3.
position before proceeding to the disassemble of traverse
unit. For procedures to set the trays in “STOCK” position,
please refer to original Service Manual for CRS1D, Section
4.3. Setting the trays in “STOCK” position, Order No.
MD0603065A3.
Step 2 Desolder wire at deck motor terminals (W1002).
Step 3 Remove Deck P.C.B.
· Assembly of Traverse Unit
11.16. Disassembly of Traverse Unit
· Follow the (Step 1) - (Step 2) of Item 11.4 - Disassembly of Top Cabinet
· Follow the (Step 1) - (Step 4) of Item 11.5 - Disassembly of CD/DVD Changer Unit
· Follow the (Step 1) - (Step 4) of Item 11.5 - Disassembly of CD/DVD Changer Unit
51
SA-VK950EE
Step 1 Pull out FFC.
Step 2 Widening the catch, push the pin in.
Step 3 Remove 4 pins.
11.17. Disassembly of optical pickup unit (CD/DVD mechanism)
· Follow the (Step 1) - (Step 2) of Item 11.4 - Disassembly of Top Cabinet
· Follow the (Step 1) - (Step 4) of Item 11.5 - Disassembly of CD/DVD Changer Unit
· Follow the (Step 1) - (Step 2) of Item 11.16 - Disassembly of Traverse Unit
· Follow the (Step 1) - (Step 4) of Item 11.5 - Disassembly of CD/DVD Changer Unit
· Follow the (Step 1) - (Step 2) of Item 11.16 - Disassembly of Traverse Unit
52
SA-VK950EE
Click on the first or last page to see other SA-VK950EE service manuals if exist.