Panasonic SA-VK950EE Service Manual ▷ View online
10.2.2. DVD Self-Diagnostic Function Error Code
Error
Code
Diagnosis Contents
Description of error
Automatic FL Display
Remarks
F010
DVD Media disk
A specification value is size from the
PARENTAL
PARENTAL
LOCK
value
of
the
appointed country.
Press [
] on main
unit for next error.
F020
DVD Media disk
There is no TT_SRPT. (RLBN is 0).
Press [
] on main
unit for next error.
F021
DVD Media disk
The number of TT_SRP is 0.
Press [
] on main
unit for next error.
F022
DVD Media disk
A specification value. It is size from the
number of TT_SRP.
number of TT_SRP.
Press [
] on main
unit for next error.
F023
DVD Media disk
VTSN or in agreement with VTS_TTN.
There is no SRP.
There is no SRP.
Press [
] on main
unit for next error.
F024
DVD Media disk
A specification value. It is size from
TT_SRP. PTT_Ns
TT_SRP. PTT_Ns
Press [
] on main
unit for next error.
F030
DVD Media disk
The number of TTU_SRP is 0.
Press [
] on main
unit for next error.
F031
DVD Media disk
A specification value. It is size from the
number of TTU_SRP.
number of TTU_SRP.
Press [
] on main
unit for next error.
F040
DVD Media disk
The number of SRP1 is 0.
Press [
] on main
unit for next error.
F041
DVD Media disk
The number of PGCI_SRP is 0.
Press [
] on main
unit for next error.
F042
DVD Media disk
A specification value. It is size from the
number of PGCI_SRP.
number of PGCI_SRP.
Press [
] on main
unit for next error.
F043
DVD Media disk
It is in agreement with Menu ID. There is
no PGCI_SRP.
no PGCI_SRP.
Press [
] on main
unit for next error.
F050
DVD Media disk
The number of TMAP_SRP is 0.
Press [
] on main
unit for next error.
F051
DVD Media disk
A specification value. It is size from the
number of TMAP_SRP.
number of TMAP_SRP.
Press [
] on main
unit for next error.
F052
DVD Media disk
Specification TMAP_SA is 0.
Press [
] on main
unit for next error.
F053
DVD Media disk
The number of MAP_EN is 0.
Press [
] on main
unit for next error.
F060
DVD Media disk
Although C_POSIT exists, it is in PGC.
There is no PGMAP.
There is no PGMAP.
Press [
] on main
unit for next error.
F061
DVD Media disk
Although C_POSIT exists, it is in PGC.
There is no PGMAP.
There is no PGMAP.
Press [
] on main
unit for next error.
29
SA-VK950EE
Error
Code
Diagnosis Contents
Description of error
Automatic FL Display
Remarks
F062
DVD Media disk
A specification value inside of PGC. It is
size from the number of PGes.
size from the number of PGes.
Press [
] on main
unit for next error.
F063
DVD Media disk
Although C_POSIT exists, it is in PGC.
There is no C_PBIT.
There is no C_PBIT.
Press [
] on main
unit for next error.
F064
DVD Media disk
Although C_POSIT exists, it is in PGC.
The number of PGes is 0.
The number of PGes is 0.
Press [
] on main
unit for next error.
F065
DVD Media disk
Specification A cell number is 0.‘
Press [
] on main
unit for next error.
F066
DVD Media disk
A specification value inside of PGC. It is
size from the number of Cell(s).
size from the number of Cell(s).
Press [
] on main
unit for next error.
F067
DVD Media disk
A blocked cell is present.
Press [
] on main
unit for next error.
F070
DVD Media disk
There is no NV_PACK data.
Press [
] on main
unit for next error.
F080
DVD Media disk
Under reference. There is no Cell
number.
number.
Press [
] on main
unit for next error.
F0E0
DVD Media disk
For [used as a DFD object] a user guide.
A PGC control file < impossible.
A PGC control file < impossible.
Press [
] on main
unit for next error.
F0E1
DVD Media disk
DFD main microcomputer. Compatibility
with a DFD type < download is
impossible.
with a DFD type < download is
impossible.
Press [
] on main
unit for next error.
F0E2
DVD Media disk
DFD download start. PGC reproduction
error.
error.
Press [
] on main
unit for next error.
F0E3
DVD Media disk
Waiting for the completion of DFD
download. PGC reproduction error.
download. PGC reproduction error.
Press [
] on main
unit for next error.
F0E4
DVD Media disk
At the time of DFD download AVDEC.
Press [
] on main
unit for next error.
F0E5
DVD Media disk
It is the farm file lead error at the time of
DFD download.
DFD download.
Press [
] on main
unit for next error.
F0E6
DVD Media disk
DFD alteration check error of the read
firmware.
firmware.
Press [
] on main
unit for next error.
F0F0
DVD Media disk
There is no farm file used as a DFD
object and it is downloading needlessly.
object and it is downloading needlessly.
Press [
] on main
unit for next error.
F0F1
DVD Media disk
The firware which is in agreement with
DFD
DFD
download
conditions
<
unnecessary.
Press [
] on main
unit for next error.
F103
Illegal highlight Position
Big possibility of disc specification
violation during highlight display
violation during highlight display
Press [
] on main
unit for next error.
F4FF
Force initialize failure
(time out)
(time out)
Timeout when force initialization fails
Press [
] on main
unit for next error.
30
SA-VK950EE
Error
Code
Diagnosis Contents
Description of error
Automatic FL Display
Remarks
F500
DSC error
DSC (IC8251) stops in the occurrence of
servo error (startup, focus error, etc.)
servo error (startup, focus error, etc.)
Press [
] on main
unit for next error.
F501
DSC not Ready error
DSC-system computer communication
error (Communication failure caused by
idling of DSC)
error (Communication failure caused by
idling of DSC)
Press [
] on main
unit for next error.
F502
DSC Time out error
Similar as F500
Press [
] on main
unit for next error.
F503
DSC communication
Failure
Failure
Communication
error
(result
error
occurred
although
communication
command was sent)
Press [
] on main
unit for next error.
F504
Abnormal adjusting DSC
data slice offset
data slice offset
Press [
] on main
unit for next error.
F505
DSC Attention error
Similar as F500
Press [
] on main
unit for next error.
F506
Invalid media
Disc is flipped over, TOC unreadable,
incompatible disc media
incompatible disc media
Press [
] on main
unit for next error.
F600
Access failure to
management information
caused by demodulation
error
management information
caused by demodulation
error
Operation stopped because navigation
data is not accessible caused by the
demodulation defect
data is not accessible caused by the
demodulation defect
Press [
] on main
unit for next error.
F601
Indeterminate sector ID
requested
requested
Operation
stopped
caused
by
the
request to access abnormal ID data
Press [
] on main
unit for next error.
F602
Access failure to LEAD-
IN caused by
demodulation error
IN caused by
demodulation error
LEAD IN data unreadable
Press [
] on main
unit for next error.
F603
Access failure to
KEYDET caused by
demodulation error
KEYDET caused by
demodulation error
Access failure to CSS data of disc
Press [
] on main
unit for next error.
F610
ODC abnormality
No permission for command execution
Press [
] on main
unit for next error.
F611
No CRC OK for a
specific time (CD)
specific time (CD)
Access failure to seek address in CD
series
series
Press [
] on main
unit for next error.
F612
No CRC OK for a
specific time (DVD)
specific time (DVD)
Access failure to ID data in DVD series
Press [
] on main
unit for next error.
F620
Laser safeguard: high
temperature condition
temperature condition
High temperature of the laser guide unit
(OPU unit)
(OPU unit)
Press [
] on main
unit for next error.
F621
Laser safeguard: circuit
failure condition
failure condition
Circuitry failure of the laser guide unit
(OPU unit)
(OPU unit)
Press [
] on main
unit for next error.
F700
MBX overflow
When replying message to disc manager
Press [
] on main
unit for next error.
F701
Message command
does not end
does not end
Next message is sent before replying to
disc manager
disc manager
Press [
] on main
unit for next error.
F702
Message command
changes
changes
Message is changed before it is sent as
a reply to disc manager
a reply to disc manager
Press [
] on main
unit for next error.
31
SA-VK950EE
Error
Code
Diagnosis Contents
Description of error
Automatic FL Display
Remarks
F880
Task number is not
appropriate
appropriate
Message coming from a non-existing
task
task
Press [
] on main
unit for next error.
F890
Sending message when
message is being sent to
AV task
message is being sent to
AV task
Sending message to AV task
Press [
] on main
unit for next error.
F891
Message couldn’t be
sent to AV task
sent to AV task
Begin sending message to AV task
Press [
] on main
unit for next error.
F893
FLASH ROM IC problem FLASH ROM IC installed is not operating
properly (Neccessary replacement of
FLASH ROM IC) or firmware problem
FLASH ROM IC) or firmware problem
Press [
] on main
unit for next error.
F894
EEPROM abnormality
EEPROM IC installed is not operating in
normal condition (EEPROM contains
neccessary data)
normal condition (EEPROM contains
neccessary data)
Press [
] on main
unit for next error.
F895
Region setting
abnormality
abnormality
Firm version agreement check for factory
preset setting failure prevention. Check
region setting & re-initialize
preset setting failure prevention. Check
region setting & re-initialize
Press [
] on main
unit for next error.
F896
No existence model
Firm version agreement check for factory
preset setting failure prevention
preset setting failure prevention
Press [
] on main
unit for next error.
F897
Initialize is not
completed
completed
Initialize completion check for factory
preset setting failure prevention
preset setting failure prevention
Press [
] on main
unit for next error.
F898
Disagreement of
hardware and software
hardware and software
Unsuitable
combination
of
AV
DECORDER, SDRAM and FLASH ROM
(firmware)
(firmware)
Press [
] on main
unit for next error.
F8A0
Message command is
not appropriate
not appropriate
Message command is not suitable
Press [
] on main
unit for next error.
Note:
An error code will be canceled if a power supply is turned OFF.
*1: CPPM is the copy guard function beforehand written in the disk for protection of copyrights.
*1: CPPM is the copy guard function beforehand written in the disk for protection of copyrights.
10.2.3. Optical Pickup Breakdown Diagnosis
This unit is equipped with the optical pickup self-diagnosis function and the tilt adjustment check function. Follow the procedure
described below during repair in order to perform self-diagnosis and tilt adjustment effectively. Especially when “NO DISC” is
displayed, be sure to apply the self-diagnosis function before replacing with an optical pickup. Replacement of optical pickup
generally requires when the present value of laser drive exceeds 45 (DVD) or 45 (CD).
Note:
described below during repair in order to perform self-diagnosis and tilt adjustment effectively. Especially when “NO DISC” is
displayed, be sure to apply the self-diagnosis function before replacing with an optical pickup. Replacement of optical pickup
generally requires when the present value of laser drive exceeds 45 (DVD) or 45 (CD).
Note:
Start diagnosis within three minutes after turning on the power (as diagnosis fails when the unit becomes warm).
32
SA-VK950EE
Click on the first or last page to see other SA-VK950EE service manuals if exist.