Panasonic SA-VK660EE / SC-VK660EE Service Manual ▷ View online
9 Self diagnosis and special mode setting
This unit is equipped with functions for checking and inspecting.
9.1. Service Mode Summary Table
9.1.1. Service Mode Summary Table (For DVD)
The service modes can be activated by pressing various button combination on the player and remote control unit.
Below is the summary of major checking:
Player buttons
Remote control unit
buttons
Application
Note
[STOP]
[0]
Error code display.
(Refer to section, “9.2.1 of Service
Mode Table 1” for more information).
Mode Table 1” for more information).
[5]
Jitter checking.
[PAUSE]
Initial setting of laser drive current
[1]
ADSC internal RAM data check.
(Refer to section 9.2.2 of Service
Mode Table 2 for more information)
Mode Table 2 for more information)
[3]
CD laser drive current check.
[FUNCTIONS]
DVD laser drive current check.
[6]
Region display and mode.
(Refer to section 9.2.3 of Service
Mode Table 3 for more information)
Mode Table 3 for more information)
[7]
Micro-processor firmware version check.
[
]
Initialization of the player (factory setting is restored.)
Used after replacement of micro-computer (DV 5.0 LSI IC
(IC8611), FLASH ROM IC, EEPROM and HDMI module.
Used after replacement of micro-computer (DV 5.0 LSI IC
(IC8611), FLASH ROM IC, EEPROM and HDMI module.
[8]
DVD (HDMI) module firmware version check.
(Refer to section 9.2.4 of Service
Mode Table 4 for more information)
Mode Table 4 for more information)
[MENU]
Communication error display.
[TOP MENU]
ECC error check.
[DISC]
CPPM/CRM keys check.
[ENTER]
DVD (HDMI) Module P.C.B. reset.
[
]
Timer 1 check.
(Refer to the section, “9.2.5 Service
Mode Table 5” for more information).
Mode Table 5” for more information).
[
]
Timer 1 reset. (while in Timer 1 check)
[
]
Timer 2 check.
[
]
Timer 2 reset. (While in Timer 2 check)
Note:
An error code will be cancelled if a power supply is turned OFF.
*1: CPPM is the copy guard function beforehand written in the disc for protection of copyrights.
*2: CEC is the consumer electronic control used for high-level user control HDMI-connected devices.
*3: HDCP is the specification developed to control digital audio & video contents transmission for DVI or HDMI connections.
Refer to section 7 (Operating Instruction) for information on the buttons.
9.1.2. Service Mode Summary Table (For Inspection)
Player buttons
Player/Remote Control Unit Buttons
Application
Note
[STOP]
[
]
To enter into self-diagnostic checking.
(Refer to section, “9.2.6 of Service
Mode Table 6” for more information).
Mode Table 6” for more information).
[1]
DVD/CD
Mechanism
changer
unit
reliability
check.
[SINGLE CHANGE]
To unlock the traverse unit for service.
[4], [7]
To enter into Doctor Mode.
9.2. Service Mode Table
By pressing various button combinations on the player and remote control unit can activate the various service modes for checking.
Special Note:
Due to the limitations of the no. characters that can be shown on FL Display, the “FL Display” button on the remote control unit
is used to show the following page. (Display 1 / Display 2).
is used to show the following page. (Display 1 / Display 2).
21
SA-VK660EE
9.2.1. Service Mode Table 1
22
SA-VK660EE
9.2.2. Service Mode Table 2
23
SA-VK660EE
9.2.3. Service Mode Table 3
24
SA-VK660EE
Click on the first or last page to see other SA-VK660EE / SC-VK660EE service manuals if exist.