Panasonic SA-VK460EE / SC-VK460EE Service Manual ▷ View online
10.17. Disassembly of Traverse Unit
Step 1 Remove top cabinet.
Step 2 Remove DVD/CD mechanism changer unit (Follow step
1 to 5).
1 to 5).
Important notes: Ensure all the trays are in the “STOCK”
position before proceeding to the disassemble of traverse
unit. For procedures to set the trays in “STOCK” position,
please refer to original Service Manual for CRS1D, Section
4.3. Setting the trays in “STOCK” position, Order No.
MD0603065A3.
position before proceeding to the disassemble of traverse
unit. For procedures to set the trays in “STOCK” position,
please refer to original Service Manual for CRS1D, Section
4.3. Setting the trays in “STOCK” position, Order No.
MD0603065A3.
•
•
•
•
Assembly of Traverse Unit
53
SA-VK460EE
10.17.1. Disassembly of Middle Chassis
Step 1 Detach FFC cable.
Step 2 Widening the catch, push the fixed pin in.
Step 3 Remove the 4 fixed pins.
Caution Note: Keep the fixed pins in safe location for
assembling.
assembling.
Step 4 Remove the traverse deck.
Caution Note: As floating springs (4 pieces) come off at the
same time, be careful not to lose them.
same time, be careful not to lose them.
10.18. Disassembly of DVD Module
P.C.B.
Step 1 Remove 4 screws.
Step 2 Flip the DVD Module P.C.B. over.
Step 3 Detach FFC cable.
Step 4 Remove DVD Module P.C.B..
54
SA-VK460EE
10.19. Disassembly of Deck
Mechanism P.C.B.
Step 1 Remove top cabinet.
Step 2 Remove DVD/CD mechanism changer unit (Follow step
1 to 5).
1 to 5).
Step 3 Remove front panel.
Step 4 Remove deck mechanism unit.
Step 5 Remove Deck P.C.B..
Step 6 Remove 1 screw.
Step 7 Desolder plunger terminals.
Step 8 Release catches.
Step 9 Remove Deck Mechanism P.C.B..
10.20. Replacement for cassette lid
Step 1 Remove top cabinet.
Step 2 Remove Deck Mechanism Unit, follow (Step 7).
Step 3 Push up the cassette lid (L/R) in the direction of arrow.
(For DECK1 and DECK2).
(For DECK1 and DECK2).
10.21. Rectification for tape jam
problem
Step 1 Remove top cabinet.
Step 2 If a cassette tape cannot be removed from the deck (the
tape is caught by the capstan or pinch roller during playback or
recording), rotate the flywheel F in the direction of the arrow to
remove it.
tape is caught by the capstan or pinch roller during playback or
recording), rotate the flywheel F in the direction of the arrow to
remove it.
Step 3 Push the lever upward and open the cassette lid.
Remove the cassette tape.
Remove the cassette tape.
Note: Follow 10.20 Disassembly of cassette lid (Step1) to
(Step 3). Remove the cassette tape.
(Step 3). Remove the cassette tape.
55
SA-VK460EE
11 Service Positions
Note: For description of the disassembly procedures, see the Section 10.
11.1. Checking and Repairing of Main P.C.B.
11.2. Checking and Repairing of SMPS P.C.B.
56
SA-VK460EE
Click on the first or last page to see other SA-VK460EE / SC-VK460EE service manuals if exist.