Panasonic SA-VK460EE / SC-VK460EE Service Manual ▷ View online
10.1. Caution
Below is the list of disassembly sections
Below shown is part no. of different screws types used:
10 Assembling and Disassembling
Special Note:
This model uses a new DVD/CD mechanism changer unit CRS1D. In this following section does not contain the necessary
disassembly & assembly information for the DVD/CD mechanism changer unit (CRS1D) except the disasembly & assembly of
traverse unit. Kindly refer to the original service manual for the DVD/CD mechanism changer unit. (Order No. MD0603064A3).
disassembly & assembly information for the DVD/CD mechanism changer unit (CRS1D) except the disasembly & assembly of
traverse unit. Kindly refer to the original service manual for the DVD/CD mechanism changer unit. (Order No. MD0603064A3).
“ATTENTION SERVICER”
Some chassis components may have sharp edges. Be careful when disassembling and servicing.
1. This section describes procedures for checking the operation of the major printed circuit boards and replacing the main
components.
2. For reassembly after operation checks or replacement, reverse the respective procedures.
Special reassembly procedures are described only when required.
3. Select items from the following index when checks or replacement are required.
4. Refer to the Parts No. on the page of “Parts Location and Replacement Parts List” (Section 23), if necessary.
Caution:
After replacing of DVD/CD Mechanism Changer Unit, ageing test is necessary. Please confirm operation for DVD/CD
Mechanism Changer Unit.
Mechanism Changer Unit.
•
•
•
•
Disassembly of Top Cabinet
•
•
•
•
Disassembly of DVD/CD Mechanism Changer Unit
•
•
•
•
Disassembly of Rear Panel
•
•
•
•
Disassembly of Main P.C.B.
•
•
•
•
Disassembly of SMPS P.C.B.
•
•
•
•
Disassembly of D-AMP P.C.B.
•
•
•
•
Disassembly of Front Panel Unit
•
•
•
•
Disassembly of Mic P.C.B.
•
•
•
•
Disassembly of Panel P.C.B.
•
•
•
•
Disassembly of Tact Switch P.C.B.
•
•
•
•
Disassembly of Deck Mechanism Unit
•
•
•
•
Disassembly of Traverse Unit
•
•
•
•
Disassembly for Optical Pickup Unit (DVD Mechanism)
•
•
•
•
Disassembly of Deck Mechanism P.C.B.
•
•
•
•
Disassembly of cassette lid
•
•
•
•
Rectification for tape jam problem
41
SA-VK460EE
10.2. Disassembly flow chart
The following chart is the procedure for disassembling the casing and inside parts for internal inspection when carrying out the
servicing.
servicing.
To assemble the unit, reverse the steps shown in the chart as below.
42
SA-VK460EE
10.3. Main Parts Location
43
SA-VK460EE
10.4. Disassembly of Top Cabinet
Step 1 Remove 3 screws on both sides on top cabinet.
Step 2 Remove 5 screws at the rear panel.
Step 3 Lift the sides of top cabinet outwards.
Step 4 Push the top cabinet backwards to release catches.
Step 5 Lift up to remove top cabinet.
(Note: Exercise with care in releasing catches.)
10.5. Disassembly of DVD/CD
Mechanism Changer Unit
Step 1 Remove top cabinet.
Step 2 Remove 2 screws at rear panel.
Step 3 Detach the FFC cables at connectors (CN2801 &
CN2805) on Main P.C.B..
CN2805) on Main P.C.B..
Step 4 Release the claws outwards on both ends.
44
SA-VK460EE
Click on the first or last page to see other SA-VK460EE / SC-VK460EE service manuals if exist.