Panasonic SA-PMX3E / SA-PMX3EG / SC-PMX3E Service Manual ▷ View online
8.3. Disassembly of Top Panel
Step 1 : Remove 2 screws at the side of Top Panel (L).
Step 2 : Remove 2 screws at the side of Top Panel (R).
Step 3 : Remove 4 screws at the rear of Top Panel.
Step 4 : Lift both sides of Top Panel outwards in the direction
of arrow.
of arrow.
Step 5 : Lift up the back part of the Top Panel and remove it in
the direction of arrow.
the direction of arrow.
21
SA-PMX3E / SA-PMX3EG
8.4. Disassembly of Front Panel
• Follow the (Step 1) - (Step 5) of Item 8.3
Step 1 : Detach 4P cable at the connector (CN5904) on
Transformer P.C.B..
Transformer P.C.B..
Step 2 : Detach 20P FFC cable at the connector (CN2804) on
Main P.C.B..
Main P.C.B..
Step 3 : Detach 17P FFC cable at the connector (CN2803) on
Main P.C.B..
Main P.C.B..
Step 4 : Detach 4P cable at the connector (CN2809) on Main
P.C.B..
P.C.B..
Step 5 : Remove 1 screw on Bridge P.C.B..
Caution : Do not exert strong force when releasing the
catches.
catches.
Step 6 : Release the catch at each side of the Front Panel in
the direction of arrow.
the direction of arrow.
Step 7 : Release the catches at the bottom of the Front Panel.
Step 8 : Remove Front Panal.
22
SA-PMX3E / SA-PMX3EG
8.5. Disassembly of Jupiter P.C.B.
• Follow the (Step 1) - (Step 5) of Item 8.3
• Follow the (Step 1) - (Step 8) of Item 8.4
• Follow the (Step 1) - (Step 8) of Item 8.4
Step 1 : Detach 5P cable at the connector (CN503) on Jupiter
P.C.B..
P.C.B..
Step 2 : Detach 6P FFC cable at the connector (CN502) on
Jupiter P.C.B..
Jupiter P.C.B..
Step 3 : Remove 2 screws.
Caution : Keep the Ground wire in safe place. Place it back
during assembling.
during assembling.
Step 4 : Remove Jupiter Unit.
Step 5 : Release all the catches.
Step 6 : Remove Jupiter Cover in the direction of arrow.
Step 7 : Desolder 4 points.
Step 8 : Remove Jupiter P.C.B..
Note : During reassembling procedures, ensure 4 points is
solder onto Jupiter P.C.B..
solder onto Jupiter P.C.B..
8.6. Disassembly of Panel A P.C.B.
• Follow the (Step 1) - (Step 5) of Item 8.3
• Follow the (Step 1) - (Step 8) of Item 8.4
• Follow the (Step 1) - (Step 4) of Item 8.5
• Follow the (Step 1) - (Step 8) of Item 8.4
• Follow the (Step 1) - (Step 4) of Item 8.5
Step 1 : Remove the Volume Knob.
23
SA-PMX3E / SA-PMX3EG
Step 2 : Remove 7 screws on the Panel A P.C.B..
Step 3 : Release all the catches.
Step 4 : Release Panel A P.C.B..
Note: During reassembling procedures, ensure Panel A
P.C.B. is fully catched onto Front Panel.
P.C.B. is fully catched onto Front Panel.
Step 5 : Desolder 6P cable (WH6802) at Panel A P.C.B..
Step 6 : Remove Panel A P.C.B..
Note: During reassembling procedures, ensure 6P cable
(WH6802) are soldered on Panel A P.C.B..
(WH6802) are soldered on Panel A P.C.B..
8.7. Disassembly of Panel B P.C.B.
• Follow the (Step 1) - (Step 5) of Item 8.3
• Follow the (Step 1) - (Step 8) of Item 8.4
• Follow the (Step 1) - (Step 8) of Item 8.4
Step 1 : Remove the Bass Knob and Treble Knob.
Step 2 : Remove 1 screw from Panel B P.C.B..
Step 3 : Release all the catches.
Step 4 : Release Panel B P.C.B..
Note: During reassembling procedures, ensure Panel B
P.C.B. is fully catched onto Front Panel.
P.C.B. is fully catched onto Front Panel.
24
SA-PMX3E / SA-PMX3EG
Click on the first or last page to see other SA-PMX3E / SA-PMX3EG / SC-PMX3E service manuals if exist.