Panasonic SA-PM250EB / SA-PM250EC / SA-PM250EE / SA-PM250EF / SA-PM250EG (serv.man2) Service Manual ▷ View online
13
5 Location of Controls and Components
5.1.
Main Unit & Remote Control Key Button Operations
14
6 Service Mode
This unit is equipped with features of self diagnostic & doctor mode setting for checking the functions & reliability.
6.1.
Self Diagnostic Table
Self Diagnostic Mode
To enter into self diagnostic
checking
checking
Item
FL display
Key operation
Mode name
Description
Error code information
Delete Error code
Example:
System will perform a check on
any unusual/error code from the
memory
any unusual/error code from the
memory
To clear the stored in memory
(EEPROM IC)
(EEPROM IC)
Opecon version
Cold Start
To display model name & version
Model Name
PM250
Version display
_4HA
Step 1 : Select CD mode
(Ensure no disc is inserted).
Step 2 : Press and hold [ ] follow by
[ -PAIRING] on main unit
for 2 second .
• To exit, press the [
TA
] on the main
unit or using the remote control.
• Unplug the AC cord.
Step 1 : In self diagnostic mode,
Press [STOP] on main unit.
• To exit, press the [
TA
] on the main
unit or using the remote control.
• Unplug the AC cord.
Step 1 :
In self diagnosis mode,
press and hold [OK] on
remote control for more than
5
second.
• To exit, press the [
TA
] on the main
unit or using the remote control.
• Unplug the AC cord.
No Rom correction
Version display
(Display 1)
(Display 2)
Press [DISPLAY] button on the
remote control.
remote control.
• To exit, press the [
TA
] on the main
unit or using the remote control.
• Unplug the AC cord.
Press [SETUP] button on the remote
control.
control.
• To exit, press the [
TA
] on the main
unit or using the remote control.
• Unplug the AC cord.
To activate cold start upon next
power up.
(Backup data are initialized)
power up.
(Backup data are initialized)
15
6.2.
Self Diagnostic Function Error Code
6.2.1.
CD Mechanism Error Code Table
6.2.2.
Power Amp Error Code Table
6.2.3.
Bluetooth Error Code Table
of error
Automatic FL Display
Remarks
CD H15
CD Open Abnormal
Press [ ] on main unit for
next error.
next error.
CD H16
CD Closing Abnormal
Press [ ] on main unit for
next error.
next error.
Error Code
Diagnostic Contents
Description of error
During normal operation, if
“POS_SW_R (OPEN_SW)”
is not detected within 4~5
sec, “CD H15” shall be
memorized.
“POS_SW_R (OPEN_SW)”
is not detected within 4~5
sec, “CD H15” shall be
memorized.
During closing operation, if
“POS_SW_CEN
(CLOSE_SW)” is not
detected within 4~5 sec,
“CD H16” shall be
memorized.
“POS_SW_CEN
(CLOSE_SW)” is not
detected within 4~5 sec,
“CD H16” shall be
memorized.
F15
CD INNER SW cannot be
detected
detected
Press [ ] on main unit for
next error.
next error.
If cannot detect CD INNER
SW, need to memory error
log "F15".
SW, need to memory error
log "F15".
F26
LSI Communication
Press [ ] on main unit for
next error.
next error.
Communication between
CD servo LSI and micro-p
abnormal (include iPod,
USB)
CD servo LSI and micro-p
abnormal (include iPod,
USB)
of error
Automatic FL Display
Remarks
F61
Press [ ] on main unit for
next error.
next error.
Press [ ] on main unit for
next error.
next error.
Error Code
Diagnostic Contents
Description of error
DAMP output abnormal
PDET2 (DC_DET_AMP)= L
(NG). PDET2
(DC_DET_AMP) is
checked by reading the
input 2x20ms, F61 error
code shall be memorized
(NG). PDET2
(DC_DET_AMP) is
checked by reading the
input 2x20ms, F61 error
code shall be memorized
F76
Power supply abnormal
PDET1 (DC_DET_PWR) = L
(NG). PDET1
(DC_DET_PWR) is checked
by reading the input 2x1ms,
F76 error code shall be
memorized.
(NG). PDET1
(DC_DET_PWR) is checked
by reading the input 2x1ms,
F76 error code shall be
memorized.
of error
Automatic FL Display
Remarks
F70
Bluetooth Communication
Communication between
Bluetooth module and
micro-p abnormal
Bluetooth module and
micro-p abnormal
Press [ ] on main unit for
next error.
next error.
Error Code
Diagnostic Contents
Description of error
16
6.3.
Doctor Mode Table 1
Note : To enter the Doctor Mode, please use HC35 remote control. (Part No : N2QAYB000641)
Item
FL Display
Key Operation
Mode Name
Description
Front Key
Doctor Mode
(Display 1)
(Display 2)
The Checksum of EEPROM and firmware
version will be display for 2 sec.
version will be display for 2 sec.
In any mode:
Press
Press
[ ]
button on main unit follow by
[4] & then [7] on the remote control of
HC35.
HC35.
•
To exit Doctor Mode, press
[
TA
]
button on main unit or on the remote
control of HC35.
• Unplug the AC cord.
In Doctor mode:
Press
Press
[1]
button on the remote control
of HC35.
To cancel, press [0] button on remote
control of HC35. [CANCEL] will be
display and returns to Doctor Mode.
control of HC35. [CANCEL] will be
display and returns to Doctor Mode.
•
To exit Doctor Mode, press
[
TA
]
button on main unit or on the remote
control of HC35.
• Unplug the AC cord.
Opecon firmware version display
To enter into Doctor Mode for
checking of various items and
displaying EEPROM check sum
and Opecon firmware version
checking of various items and
displaying EEPROM check sum
and Opecon firmware version
Note: The Opecon firmware
version as shown is an example.
It will be revised when there is
updates.
version as shown is an example.
It will be revised when there is
updates.
FL Display sequence Display
1
1
¡2
FL Display Test
To check the FL segments
display (All segments will light
up)
display (All segments will light
up)
In Doctor Mode:
Press [
] follow by [2] & then [1]
button on the remote control of HC35.
To check the operation of sliding
Panel.
Sequence as follow :
1. CD Open and stop at OPEN
position for 1 sec.
2. CD Close and stop at CLOSE
position for 4 sec.
3. All the process above is
considered as 1 cycle. Cycle
Counter display increase
every 1 cycle completed.
Panel.
Sequence as follow :
1. CD Open and stop at OPEN
position for 1 sec.
2. CD Close and stop at CLOSE
position for 4 sec.
3. All the process above is
considered as 1 cycle. Cycle
Counter display increase
every 1 cycle completed.
Mecha Sliding
Panel Reliability
Panel Reliability
•
To exit Doctor Mode, press
[
TA
]
button on main unit or on the remote
control of HC35.
• Unplug the AC cord.
To cancel, press [0] button on remote
control of HC35. [CANCEL] will be
display and returns to Doctor Mode.
control of HC35. [CANCEL] will be
display and returns to Doctor Mode.
Model Name
PM250
Version display
_4HA
Click on the first or last page to see other SA-PM250EB / SA-PM250EC / SA-PM250EE / SA-PM250EF / SA-PM250EG (serv.man2) service manuals if exist.