Panasonic SA-PM23P / SA-PM23PC Service Manual ▷ View online
5 Handling the Lead-free Solder
5.1. About lead free solder (PbF)
Distinction of PbF P.C.B.:
P.C.B.s (manufactured) using lead free solder will have a PbF stamp on the P.C.B.
Caution:
· Pb free solder has a higher melting point than standard solder; Typically the melting point is 50 - 70°F (30 - 40°C) higher. Please
P.C.B.s (manufactured) using lead free solder will have a PbF stamp on the P.C.B.
Caution:
· Pb free solder has a higher melting point than standard solder; Typically the melting point is 50 - 70°F (30 - 40°C) higher. Please
use a high temperature soldering iron. In case of soldering iron with temperature control, please set it to 700 ± 20°F (370 ±
10°C).
10°C).
· Pb free solder will tend to splash when heated too high (about 1100°F/600°C).
· When soldering or unsoldering, please completely remove all of the solder on the pins or solder area, and be sure to heat the
· When soldering or unsoldering, please completely remove all of the solder on the pins or solder area, and be sure to heat the
soldering points with the Pb free solder until it melts enough.
9
SA-PM23P / SA-PM23PC
Remote control
AC cord
FM indoor
antenna
AM loop antenna
6 Accessories
Note : Refer to Packing Materials & Accessories (Section 23) for part number.
10
SA-PM23P / SA-PM23PC
7 Operating Instructions Procedures
7.1. Main Unit & Remote Control Operation
11
SA-PM23P / SA-PM23PC
7.2. Disc Information
12
SA-PM23P / SA-PM23PC
Click on the first or last page to see other SA-PM23P / SA-PM23PC service manuals if exist.