Panasonic SA-HT892EE Service Manual ▷ View online
9.2.3. Service Mode Table 3
Timer 1 check
Cancelled automatically
5 seconds later.
5 seconds later.
Cancelled automatically
5 seconds later.
5 seconds later.
Cancelled automatically
5 seconds later.
5 seconds later.
Cancelled automatically
5 seconds later.
5 seconds later.
Timer 1 reset
Timer 2 check
Timer 2 reset
In STOP (no disc)
mode, press STOP button
on the player, and " "
button on the remote
control unit.
mode, press STOP button
on the player, and " "
button on the remote
control unit.
While displaying Timer 1
data, press STOP button
on the player, and " "
button on the remote
control unit.
data, press STOP button
on the player, and " "
button on the remote
control unit.
In STOP (no disc)
mode, press STOP button
on the player, and " "
button on the remote
control unit.
mode, press STOP button
on the player, and " "
button on the remote
control unit.
While displaying Timer 2
data, press STOP button on
the player, and " " button
on the remote control unit.
data, press STOP button on
the player, and " " button
on the remote control unit.
Timer 1 check
Laser operation timer is measured
separately for DVD laser and CD laser.
Laser operation timer is measured
separately for DVD laser and CD laser.
Press "FL Display" button for
next page of FL Display.
next page of FL Display.
Timer 1 reset
Laser operation timer of both DVD
laser and CD laser is reset all at once.
Laser operation timer of both DVD
laser and CD laser is reset all at once.
Timer 2 check
Spindle motor operation timer
Spindle motor operation timer
Timer 2 reset
Spindle motor operation timer
Spindle motor operation timer
Time is shown in 5 digits of decimal notation in
a unit of 10 hours.
"00000" will follow "99999".
a unit of 10 hours.
"00000" will follow "99999".
Shown to the left is DVD laser time, and to
the right is CD laser time.
Time is shown in 4 digits of decimal notation
in a unit of 10 hours.
"0000" will follow "9999".
the right is CD laser time.
Time is shown in 4 digits of decimal notation
in a unit of 10 hours.
"0000" will follow "9999".
FL Display
Key Operation
Front Key
Item
Description
Mode Name
Shown to the left is DVD laser time, and to
the right is CD laser time.
It will clear to "0000" upon reset.
the right is CD laser time.
It will clear to "0000" upon reset.
Time is shown in 5 digits of decimal notation in
a unit of 10 hours.
It will be cleared to "00000" upon activating
this.
a unit of 10 hours.
It will be cleared to "00000" upon activating
this.
DVD (HDMI)
Module Reset
To reset DVD (HDMI) Module.
Cancelled automatically
5 seconds later.
5 seconds later.
While in initialization
mode, press & hold STOP
button on player, follow by
"ENTER" button on the
remote control unit.
mode, press & hold STOP
button on player, follow by
"ENTER" button on the
remote control unit.
This process is used when the DVD
module or flash ROM IC is replaced
with a new one.
module or flash ROM IC is replaced
with a new one.
9.2.4. Optical Pick-up Self-Diagnosis
The optical pickup self-diagnosis function and tilt adjustment check function have been included in this unit. When repairing, use
the following procedure for effective self-diagnosis and tilt adjustment. Be sure to use the self-diagnosis function before replacing
the optical pickup when "NO DISC" is displayed. As a guideline, you should replace the optical pickup when the value of the laser
drive current is more than 27.
Note:
the following procedure for effective self-diagnosis and tilt adjustment. Be sure to use the self-diagnosis function before replacing
the optical pickup when "NO DISC" is displayed. As a guideline, you should replace the optical pickup when the value of the laser
drive current is more than 27.
Note:
Press the power button to turn on the power, and check the value within three minutes before the unit warms up. (Otherwise,
the result will be incorrect.)
the result will be incorrect.)
25
SA-HT892EE
26
SA-HT892EE
9.3. DVD Self Diagnostic Function-Error Code
9.3.1. Error Code Table 1
Error
Code
Diagnosis Contents
Description of error
Automatic FL Display
Remarks
U11
Focus servo error
Focus coil NG (OPU unit abnormal)
Press [ n STOP] on main
unit for next error.
unit for next error.
H01
Tray loading error /
abnormality
abnormality
The tray is not able to open
Press [ n STOP] on main
unit for next error
unit for next error
H02
Spindle servo error, DSC
disc motor error
disc motor error
(Spindle servo, DSC (IC8251) Spindle
motor, CLV servo error)
motor, CLV servo error)
Press [ n STOP] on main
unit for next error
unit for next error
H03
Traverse motor error
(Traverse motor, IC8251)
Press [ n STOP] on main
unit for next error
unit for next error
H04
Tracking servo error
Tracking coil NG (OPU unit abmormal)
Press [ n STOP] on main
unit for next error
unit for next error
H05
Seek timeout error
Timeout of unit when seeking time is
reached
reached
Press [ n STOP] on main
unit for next error
unit for next error
H15
Disc tray open detection
switch (S9001) failure
switch (S9001) failure
The disc tray cannot be opened: it closes
spontaneously
spontaneously
Press [ n STOP] on main
unit for next error
unit for next error
H16
Disc tray close detection
switch (S9001) failure
switch (S9001) failure
The disc tray cannot be closed: it opens
spontaneously
spontaneously
Press [ n STOP] on main
unit for next error
unit for next error
F61
Power digital amp IC op &
DC output voltage
abnormal.
DC output voltage
abnormal.
Upon
power-on
PCONT=High,
DCDET=Low.
Speaker connection could be problem
Speaker connection could be problem
Press [ n STOP] on main
unit for next error
unit for next error
F76
Power digital amp IC op &
DC output voltage
abnormal.
DC output voltage
abnormal.
Speaker Jack shorted or amp circuit
Press [ n STOP] on main
unit for next error
unit for next error
F500
DSC error
DSC (IC8251) stops in the occurrence of
servo error (startup, focus error, etc.)
servo error (startup, focus error, etc.)
Press [ n STOP] on main
unit for next error
unit for next error
F501
DSC not Ready error
DSC-system computer communication
error (Communication failure caused by
idling of DSC)
error (Communication failure caused by
idling of DSC)
Press [ n STOP] on main
unit for next error
unit for next error
F502
DSC Time out error
Similar as F500
Press [ n STOP] on main
unit for next error
unit for next error
F503
DSC communication
Failure
Failure
Communication
error
(result
error
occurred
although
communication
command was sent)
Press [ n STOP] on main
unit for next error
unit for next error
F504
Abnormal adjusting DSC
data slice offset
data slice offset
Press [ n STOP] on main
unit for next error
unit for next error
F505
DSC Attention error
Similar as F500
Press [ n STOP] on main
unit for next error
unit for next error
27
SA-HT892EE
9.3.2. Error Code Table 2
Error
Code
Diagnosis Contents
Description of error
Automatic FL Display
Remarks
F506
Invalid media
Disc is flipped over, TOC unreadable,
incompatible disc media
incompatible disc media
Press [ n STOP] on main
unit for next error
unit for next error
F600
Access failure to
management information
caused by demodulation
error
management information
caused by demodulation
error
Operation stopped because navigation
data is not accessible caused by the
demodulation defect
data is not accessible caused by the
demodulation defect
Press [ n STOP] on main
unit for next error
unit for next error
F601
Indeterminate sector ID
requested
requested
Operation
stopped
caused
by
the
request to access abnormal ID data
Press [ n STOP] on main
unit for next error
unit for next error
F602
Access failure to LEAD-IN
caused by demodulation
error
caused by demodulation
error
LEAD IN data unreadable
Press [ n STOP] on main
unit for next error
unit for next error
F603
Access failure to KEYDET
caused by demodulation
error
caused by demodulation
error
Access failure to CSS data of disc
Press [ n STOP] on main
unit for next error
unit for next error
F610
ODC abnormality
No permission for command execution
Press [ n STOP] on main
unit for next error
unit for next error
F611
No CRC OK for a specific
time (CD)
time (CD)
Access failure to seek address in CD
series
series
Press [ n STOP] on main
unit for next error
unit for next error
F612
No CRC OK for a specific
time (DVD)
time (DVD)
Access failure to ID data in DVD series
Press [ n STOP] on main
unit for next error
unit for next error
F620
Laser safeguard: high
temperature condition
temperature condition
High temperature of the laser guide unit
(OPU unit)
(OPU unit)
Press [ n STOP] on main
unit for next error
unit for next error
F621
Laser safeguard: circuit
failure condition
failure condition
Circuitry failure of the laser guide unit
(OPU unit)
(OPU unit)
Press [ n STOP] on main
unit for next error
unit for next error
F103
Illegal highlight Position
Big possibility of disc specification
violation during highlight display
violation during highlight display
Press [ n STOP] on main
unit for next error
unit for next error
F4FF
Force initialize failure (time
out)
out)
Timeout when force initialization fails
Press [ n STOP] on main
unit for next error
unit for next error
F700
MBX overflow
When replying message to disc manager
Press [ n STOP] on main
unit for next error
unit for next error
F701
Message command does
not end
not end
Next message is sent before replying to
disc manager
disc manager
Press [ n STOP] on main
unit for next error
unit for next error
F702
Message command
changes
changes
Message is changed before it is sent as
a reply to disc manager
a reply to disc manager
Press [ n STOP] on main
unit for next error
unit for next error
F880
Task number is not
appropriate
appropriate
Message coming from a non-existing
task
task
Press [ n STOP] on main
unit for next error
unit for next error
28
SA-HT892EE
Click on the first or last page to see other SA-HT892EE service manuals if exist.