Panasonic SA-HT543EE Service Manual ▷ View online
Step 2 Hook the lock lever spring on the lock lever projection
part temporarly.
Step 3 Unlock the tab and remove the lock lever.
part temporarly.
Step 3 Unlock the tab and remove the lock lever.
Step 4 Remove the belt.
Step 5 Unlock the tab and remove the pulley.
Step 6 Remove the relay gear.
Step 5 Unlock the tab and remove the pulley.
Step 6 Remove the relay gear.
Step 7 Turn the change lever in the arrow direction till it stops.
Step 8 Hook the change lever spring on the change lever
project part temporarily.
Step 8 Hook the change lever spring on the change lever
project part temporarily.
Step 9 Pull the lever (B) in the bottom side to your side and
remove the change lever.
remove the change lever.
Step 10 Remove the drive rack, the sub rack and the drive
gear.
gear.
41
SA-HT543EE
11.1.4. Disassembly of Tray Loading
P.C.B.
Step 1 Remove 3 screws
11.1.5. Disassembly of Optical Pickup
Unit
Special Note: Anti-static measures are necessary due to
handling of OPU unit .
Step 1 Spread the tabs to push in the pin.
handling of OPU unit .
Step 1 Spread the tabs to push in the pin.
Step 2 Remove 4 pins.
Step 3 Remove the middle chassis.
42
SA-HT543EE
Step 4 Remove the optical pickup unit in the arrow direction till
it stops.
it stops.
Step 5 Remove 2 screws.
Step 6 Remove the drive rack.
Step 7 Remove 1 screw.
Step 8 Slide the shaft in the arrow direction.
Step 8 Slide the shaft in the arrow direction.
Step 9 Lift the optical pickup unit with the shaft.
Step 10 Remove the optical pickup unit.
43
SA-HT543EE
Step 11 Pull the shaft and the rubber out.
(Assembling the optical pickup unit)
Step 1 Pass the intermediate FPC through the frame hole.
Step 2 Align the guide section of the optical pickup unit with
the rail.
Step 3 Install the shaft top to the holder.
Step 2 Align the guide section of the optical pickup unit with
the rail.
Step 3 Install the shaft top to the holder.
44
SA-HT543EE
Click on the first or last page to see other SA-HT543EE service manuals if exist.