Panasonic SA-BTX70EB / SA-BTX70EG / SA-BTX68EF Service Manual ▷ View online
65
Step 1 Remove SD USB P.C.B..
Caution: During assembling, ensure that SD USB P.C.B. is
seated properly onto the SD USB Wireless Chassis.
seated properly onto the SD USB Wireless Chassis.
Caution: During assembling, ensure that SD USB Spring
plate is in good condition. Replace it if broken.
plate is in good condition. Replace it if broken.
9.22. Disassembly of D-Amp P.C.B.
• Follow the (Step 1) to (Step 7) of Item 9.3.
• Follow the (Step 1) to (Step 8) of Item 9.4.
• Follow the (Step 1) to (Step 7) of Item 9.5.1.
• Follow the (Step 1) to (Step 3) of Item 9.8.1.
• Follow the (Step 1) to (Step 3) of Item 9.9.
• Follow the (Step 1) to (Step 9) of Item 9.10.
• Follow the (Step 1) to (Step 8) of Item 9.18.
• Follow the (Step 1) to (Step 12) of Item 9.19.
• Follow the (Step 1) to (Step 8) of Item 9.4.
• Follow the (Step 1) to (Step 7) of Item 9.5.1.
• Follow the (Step 1) to (Step 3) of Item 9.8.1.
• Follow the (Step 1) to (Step 3) of Item 9.9.
• Follow the (Step 1) to (Step 9) of Item 9.10.
• Follow the (Step 1) to (Step 8) of Item 9.18.
• Follow the (Step 1) to (Step 12) of Item 9.19.
Step 1 Remove 2 screws at Right Chassis Unit.
Step 2 Remove 4 screws on D-Amp P.C.B..
Step 2 Remove 4 screws on D-Amp P.C.B..
Step 3 Remove D-Amp P.C.B..
66
Caution: During assembling, ensure that D-Amp P.C.B. is
seated properly at the locator.
seated properly at the locator.
9.23. Replacement of Audio Ampli-
fier Driver IC (IC5001)
• Follow the (Step 1) to (Step 7) of Item 9.3.
• Follow the (Step 1) to (Step 8) of Item 9.4.
• Follow the (Step 1) to (Step 7) of Item 9.5.1.
• Follow the (Step 1) to (Step 3) of Item 9.8.1.
• Follow the (Step 1) to (Step 3) of Item 9.9.
• Follow the (Step 1) to (Step 9) of Item 9.10.
• Follow the (Step 1) to (Step 8) of Item 9.18.
• Follow the (Step 1) to (Step 12) of Item 9.19.
• Follow the (Step 1) to (Step 3) of Item 9.22.
• Follow the (Step 1) to (Step 8) of Item 9.4.
• Follow the (Step 1) to (Step 7) of Item 9.5.1.
• Follow the (Step 1) to (Step 3) of Item 9.8.1.
• Follow the (Step 1) to (Step 3) of Item 9.9.
• Follow the (Step 1) to (Step 9) of Item 9.10.
• Follow the (Step 1) to (Step 8) of Item 9.18.
• Follow the (Step 1) to (Step 12) of Item 9.19.
• Follow the (Step 1) to (Step 3) of Item 9.22.
9.23.1.
Disassembly of Audio Amplifier
Driver IC (IC5001)
Driver IC (IC5001)
Step 1 Remove 2 screws on solder side of D-Amp P.C.B..
Step 2 Lift up heatsink unit A.
Step 3 Desolder pins of Audio Amplifier Driver IC (IC5001) on
D-Amp P.C.B..
Step 4 Remove Audio Amplifier Driver IC (IC5001).
D-Amp P.C.B..
Step 4 Remove Audio Amplifier Driver IC (IC5001).
67
9.23.2.
Assembly of Audio Amplifier Driver
IC (IC5001)
IC (IC5001)
Step 1 Mount the Audio Amplifier Driver IC (IC5001) onto D-
Amp P.C.B..
Caution: During assembling, ensure that the pins of Audio
Amplifier Driver IC (IC5001) is positioned correctly on D-
Amp P.CB..
Amp P.C.B..
Caution: During assembling, ensure that the pins of Audio
Amplifier Driver IC (IC5001) is positioned correctly on D-
Amp P.CB..
Step 2 Install heatsink unit A onto D-Amp P.C.B..
Step 3 Screw 2 screws on the solder side of D-Amp P.C.B..
9.24. Disassembly of Digital P.C.B.
• Follow the (Step 1) to (Step 7) of Item 9.3.
• Follow the (Step 1) to (Step 8) of Item 9.4.
• Follow the (Step 1) to (Step 7) of Item 9.5.1.
• Follow the (Step 1) to (Step 3) of Item 9.8.1.
• Follow the (Step 1) to (Step 3) of Item 9.9.
• Follow the (Step 1) to (Step 9) of Item 9.10.
• Follow the (Step 1) to (Step 8) of Item 9.18.
• Follow the (Step 1) to (Step 12) of Item 9.19.
• Follow the (Step 1) to (Step 8) of Item 9.4.
• Follow the (Step 1) to (Step 7) of Item 9.5.1.
• Follow the (Step 1) to (Step 3) of Item 9.8.1.
• Follow the (Step 1) to (Step 3) of Item 9.9.
• Follow the (Step 1) to (Step 9) of Item 9.10.
• Follow the (Step 1) to (Step 8) of Item 9.18.
• Follow the (Step 1) to (Step 12) of Item 9.19.
Caution: Paring of BD Drive and Digital P.C.B. as “BD
Drive/Digital P.C.B. Kit Assembly” have to be replaced
together. If the either BD Drive or Digital P.C.B. is changed,
BD Drive unit has to be re-aligned. Because the alignment
data for BD Drive Unit is stored in Digital P.C.B.
68
Step 1 Detach 45P FFC at the connector (P55001) on Digital
P.C.B..
Step 2 Detach 4P wire at the connector (P55005) on Digital
P.C.B..
Caution: During assembling, ensure that 4P wire is
dressed into U-slot properly.
Step 3 Detach 12P FFC at the connector (P55002) on Digital
P.C.B..
P.C.B..
Step 2 Detach 4P wire at the connector (P55005) on Digital
P.C.B..
Caution: During assembling, ensure that 4P wire is
dressed into U-slot properly.
Step 3 Detach 12P FFC at the connector (P55002) on Digital
P.C.B..
Step 4 Detach 4P wire at the connector (P55003) on Digital
P.C.B..
Step 5 Detach 20P FFC at the connector (P54002) on Digital
P.C.B..
Step 6 Detach 28P FFC at the connector (P58000) on Digital
P.C.B..
Step 7 Detach 4P wire at the connector (P55006) on Digital
P.C.B..
P.C.B..
Step 5 Detach 20P FFC at the connector (P54002) on Digital
P.C.B..
Step 6 Detach 28P FFC at the connector (P58000) on Digital
P.C.B..
Step 7 Detach 4P wire at the connector (P55006) on Digital
P.C.B..
Step 8 Remove 1 screw at iPod FFC cover.
Step 9 Remove gasket.
Caution: Replace the gasket if it is broken.
Step 10 Remove iPod FFC Cover.
Step 11 Remove Himelon that paste in digital shield unit F.
Step 12 Remove 1 screw at digital shield unit F.
Step 13 Remove digital shield unit F.
Caution: Replace the support cushion F if it is broken.
Step 9 Remove gasket.
Caution: Replace the gasket if it is broken.
Step 10 Remove iPod FFC Cover.
Step 11 Remove Himelon that paste in digital shield unit F.
Step 12 Remove 1 screw at digital shield unit F.
Step 13 Remove digital shield unit F.
Caution: Replace the support cushion F if it is broken.
Step 14 Remove 2 screws at Left Chassis Unit.
Step 15 Remove 1 screws at Left Chassis Unit.
Step 15 Remove 1 screws at Left Chassis Unit.
Click on the first or last page to see other SA-BTX70EB / SA-BTX70EG / SA-BTX68EF service manuals if exist.