Panasonic SA-BTX70EB / SA-BTX70EG / SA-BTX68EF Service Manual ▷ View online
45
Step 4 Slide to remove the Right Ornament.
Caution: During assembling, ensure the Right Ornament is
attached properly.
attached properly.
9.5.
Replacement of Rear Cabinet
• Follow the (Step 1) to (Step 7) of Item 9.3.
• Follow the (Step 1) to (Step 8) of Item 9.4.
• Follow the (Step 1) to (Step 8) of Item 9.4.
9.5.1.
Disassembly of Rear Cabinet
Step 1 Remove 7 screws.
Step 2 Remove 3 screws.
Step 2 Remove 3 screws.
Step 3 Remove 1 screw.
Step 4 Remove 1 screw at the side of rear cabinet.
46
Step 5 Upset the main unit.
Step 6 Release 3 catches at the bottom of rear cabinet.
Caution: Ensure it is fully catched during assembling.
Step 6 Release 3 catches at the bottom of rear cabinet.
Caution: Ensure it is fully catched during assembling.
Step 7 Lift up to remove rear cabinet.
Caution: During assembling, ensure that rear cabinet
assembly is properly fixed and fully catched onto front
cabinet.
Caution: During assembling, ensure that rear cabinet
assembly is properly fixed and fully catched onto front
cabinet.
Caution: During replacement of rear cabinet, ensure the
gaskets are attached, replace gaskets if broken.
gaskets are attached, replace gaskets if broken.
9.5.2.
Assembly of Rear Cabinet
• Follow the (Step 1) to (Step 7) of Item 9.5.1
Step 1 Fix the Rear Cabinet onto the front cabinet.
Caution: Ensure it is fully catched onto the front cabinet.
Step 2 Mount 3 screws onto the front cabinet.
Step 3 Mount 7 screws onto the front cabinet.
Caution: Please follow screwing sequence (A to J) to
mount the screws onto front cabinet.
Step 3 Mount 7 screws onto the front cabinet.
Caution: Please follow screwing sequence (A to J) to
mount the screws onto front cabinet.
9.6.
Disassembly of Top Ornament
Assembly
Assembly
• Follow the (Step 1) to (Step 7) of Item 9.3.
• Follow the (Step 1) to (Step 8) of Item 9.4.
• Follow the (Step 1) to (Step 8) of Item 9.4.
47
Step 1 Remove 4 screws at Top Ornament Assembly.
Step 2 Lift up Top Ornament Assembly.
Caution: During assembling, ensure that 2P wire is
dressed between the ribs properly.
dressed between the ribs properly.
Caution: During assembling, ensure that 4P wire is
dressed between the ribs properly.
dressed between the ribs properly.
9.7.
Disassembly of Power Button
and Volume Button P.C.B.
and Volume Button P.C.B.
• Follow the (Step 1) to (Step 7) of Item 9.3.
• Follow the (Step 1) to (Step 8) of Item 9.4.
• Follow the (Step 1) to (Step 2) of Item 9.6.
• Follow the (Step 1) to (Step 8) of Item 9.4.
• Follow the (Step 1) to (Step 2) of Item 9.6.
Step 1 Remove 6 screws.
Step 2 Remove Power Button P.C.B..
Step 3 Remove Volume Button P.C.B..
Step 2 Remove Power Button P.C.B..
Step 3 Remove Volume Button P.C.B..
48
Caution: During assembling, ensure that 3P wire is prop-
erly dressed into the slots.
erly dressed into the slots.
9.8.
Disassembly of Rear Shield
• Follow the (Step 1) to (Step 7) of Item 9.3.
• Follow the (Step 1) to (Step 8) of Item 9.4.
• Follow the (Step 1) to (Step 7) of Item 9.5.1.
• Follow the (Step 1) to (Step 8) of Item 9.4.
• Follow the (Step 1) to (Step 7) of Item 9.5.1.
9.8.1.
Disassembly of Rear Shield
Step 1 Remove 2 screws.
Step 2 Remove 8 screws.
Step 2 Remove 8 screws.
Step 3 Remove rear shield.
Caution: During assembling, ensure that rear shield is
seated properly at the locators.
seated properly at the locators.
9.8.2.
Assembly of Rear Shield
• Follow the (Step 1) to (Step 3) of Item 9.8.1
Step 1 Fix the rear shield as diagram shown.
Click on the first or last page to see other SA-BTX70EB / SA-BTX70EG / SA-BTX68EF service manuals if exist.