Panasonic SA-BTT270EB / SA-BTT270EE / SA-BTT270EG / SA-BTT270EP / SA-BTT270GN / SC-BTT270EEK Service Manual ▷ View online
97
10.20. Replacement of Switching Reg-
ulator IC (IC5701)
• Refer to “Disassembly of Top Cabinet”.
• Refer to “Disassembly of SMPS P.C.B.”.
• Refer to “Disassembly of SMPS P.C.B.”.
10.20.1. Disassembly of Switching Regula-
tor IC (IC5701)
Step 1 Place SMPS P.C.B. on an insulated material.
Step 2 Desolder pins of the Switching Regulator IC (IC5701) on
the solder side of SMPS P.C.B..
Step 3 Desolder pins of the Rectifier Diode (D5702) on the sol-
der side of SMPS P.C.B..
Step 4 Desolder pins of the Heatsink A.
Step 2 Desolder pins of the Switching Regulator IC (IC5701) on
the solder side of SMPS P.C.B..
Step 3 Desolder pins of the Rectifier Diode (D5702) on the sol-
der side of SMPS P.C.B..
Step 4 Desolder pins of the Heatsink A.
Step 5 Remove the Switching Regulator Unit in the direction of
arrow.
arrow.
Caution: Avoid touching the Switching Regulator Unit due
to its high temperature after prolonged use. Touching it
may lead to injuries.
to its high temperature after prolonged use. Touching it
may lead to injuries.
Step 6 Remove 1 screw from the Switching Regulator IC
(IC5701).
Step 7 Remove the Switching Regulator IC (IC5701) from the
Heatsink A.
Note: Refer to the diagrams of SMPS P.C.B. (Item 18.4) for
location of the part.
(IC5701).
Step 7 Remove the Switching Regulator IC (IC5701) from the
Heatsink A.
Note: Refer to the diagrams of SMPS P.C.B. (Item 18.4) for
location of the part.
98
10.20.2. Assembly of Switching Regulator
IC (IC5701)
Step 1 Apply Grease to the back of Switching Regulator IC
(IC5701).
Step 2 Fix & screw the Switching Regulator IC (IC5701) to the
Switching Regulator Unit.
Caution: Ensure that the Switching Regulator IC (IC5701) is
properly fixed & fully screwed onto Heatsink A.
(IC5701).
Step 2 Fix & screw the Switching Regulator IC (IC5701) to the
Switching Regulator Unit.
Caution: Ensure that the Switching Regulator IC (IC5701) is
properly fixed & fully screwed onto Heatsink A.
Step 3 Fix the Switching Regulator Unit onto SMPS P.C.B..
Caution: Ensure that Switching Regulator Unit is properly
seated on SMPS P.C.B..
Caution: Ensure that Switching Regulator Unit is properly
seated on SMPS P.C.B..
Step 4 Solder pins of the Switching Regulator IC (IC5701) on
the solder side of SMPS P.C.B..
Step 5 Solder pins of the Rectifier Diode (D5702) on the solder
side of SMPS P.C.B..
Step 6 Solder pins of the Heatsink A.
the solder side of SMPS P.C.B..
Step 5 Solder pins of the Rectifier Diode (D5702) on the solder
side of SMPS P.C.B..
Step 6 Solder pins of the Heatsink A.
99
10.21. Replacement of Rectifier Diode
(D5702)
• Refer to “Disassembly of Top Cabinet”.
• Refer to “Disassembly of SMPS P.C.B.”.
• Refer to “Disassembly of SMPS P.C.B.”.
10.21.1. Disassembly of Rectifier Diode
(D5702)
Step 1 Place SMPS P.C.B. on an insulated material.
Step 2 Desolder pins of the Switching Regulator IC (IC5701) on
the solder side of SMPS P.C.B..
Step 3 Desolder pins of the Rectifier Diode (D5702) on the sol-
der side of SMPS P.C.B..
Step 4 Desolder pins of the Heatsink A.
Step 2 Desolder pins of the Switching Regulator IC (IC5701) on
the solder side of SMPS P.C.B..
Step 3 Desolder pins of the Rectifier Diode (D5702) on the sol-
der side of SMPS P.C.B..
Step 4 Desolder pins of the Heatsink A.
Step 5 Remove the Switching Regulator Unit in the direction of
arrow.
arrow.
Caution: Avoid touching the Switching Regulator Unit due
to its high temperature after prolonged use. Touching it
may lead to injuries.
to its high temperature after prolonged use. Touching it
may lead to injuries.
Step 6 Remove 1 screw from the Rectifier Diode (D5702).
Step 7 Remove Rectifier Diode (D5702) from the Heatsink A.
Note: Refer to the diagrams of SMPS P.C.B. (Item 18.4) for
location of the part.
Step 7 Remove Rectifier Diode (D5702) from the Heatsink A.
Note: Refer to the diagrams of SMPS P.C.B. (Item 18.4) for
location of the part.
100
10.21.2. Assembly of Rectifier Diode
(D5702)
Step 1 Apply Grease to the back of Rectifier Diode (D5702).
Step 2 Fix & screw the Rectifier Diode (D5702) to the Heatsink
A.
Caution: Ensure that Rectifier Diode (D5702) is properly
fixed & screwed onto Switching Regulator Unit.
Step 2 Fix & screw the Rectifier Diode (D5702) to the Heatsink
A.
Caution: Ensure that Rectifier Diode (D5702) is properly
fixed & screwed onto Switching Regulator Unit.
Step 3 Fix the Switching Regulator Unit onto SMPS P.C.B..
Caution: Ensure that Switching Regulator Unit is properly
seated on SMPS P.C.B..
Caution: Ensure that Switching Regulator Unit is properly
seated on SMPS P.C.B..
Step 4 Solder pins of the Switching Regulator IC (IC5701) on
the solder side of SMPS P.C.B..
Step 5 Solder pins of the Rectifier Diode (D5702) on the solder
side of SMPS P.C.B..
the solder side of SMPS P.C.B..
Step 5 Solder pins of the Rectifier Diode (D5702) on the solder
side of SMPS P.C.B..
Step 6 Solder pins of the Heatsink A.
Click on the first or last page to see other SA-BTT270EB / SA-BTT270EE / SA-BTT270EG / SA-BTT270EP / SA-BTT270GN / SC-BTT270EEK service manuals if exist.