Panasonic SA-BTT190EB / SA-BTT190EG / SA-BTT190EP / SA-BTT190GN / SA-BTT195EE / SA-BTT195EP / SC-BTT195EEK Service Manual ▷ View online
13
3.2.2.2.
Updating firmware using the USB device
When updating firmware using USB device, perform following procedures.
(When using CD-R instead of USB device, perform same procedures)
(When using CD-R instead of USB device, perform same procedures)
1. Download the latest firmware file of the unit.
The latest firmware required for version-up can be downloaded from “Support Information from NWBG/VDBG-PAVC” web-site
in “TSN system”.
Click file name to download.
After download, click file to decompress. (Total: 1 file).
in “TSN system”.
Click file name to download.
After download, click file to decompress. (Total: 1 file).
2. Decompress the downloaded file.
The decompressed file will be named as follows.
File Name: PANA_DVD.FRM
Copy the file to root folder of the USB device.
(If using CD-R instead of USB device, burn the file to a blank CD-R by writing software.)
File Name: PANA_DVD.FRM
Copy the file to root folder of the USB device.
(If using CD-R instead of USB device, burn the file to a blank CD-R by writing software.)
3. Update the unit.
14
4 Specifications
Main unit
O
GENERAL
Power consumption:
80 W
Power Consumption in standby mode:
Approx. 0.1 W
Power supply:
AC 220 V to 240 V, 50 Hz
Dimensions (W
×
H
×
D):
430 mm
×
47 mm
×
263 mm
Mass:
Approx. 2.4 kg
Operating temperature range:
0
°
C to 40
°
C
Operating humidity range:
35 % to 80 % RH (no condensation)
O
AMPLIFIER SECTION
RMS TTL Power Output:
1000 W
1 kHz, 10% total harmonic distortion
FRONT:
FRONT:
160 W per channel (3
Ω
)
CENTER:
160 W per channel (3
Ω
)
SURROUND:
160 W per channel (3
Ω
)
100 Hz, 10% total harmonic distortion
SUBWOOFER:
SUBWOOFER:
200 W per channel (3
Ω
)
Audio Input
AUX
×
1
Digital Audio Input
Optical
×
1
Sampling frequency:
32 kHz, 44.1 kHz, 48 kHz
Audio Format:
PCM, Dolby Digital, DTS
O
FM TUNER SECTION
Frequency range:
87.50 MHz to 108.00 MHz (50 kHz step)
Antenna terminals:
75
Ω
(unbalanced)
O
TERMINAL SECTION
USB Slot:
USB2.0: 2 system
SD card slot:
Connector: 1 system
Ethernet:
10BASE-T/100BASE-TX 1 system
O
VIDEO SECTION
Signal system:
PAL/NTSC
HDMI AV Output*
Output connector:
Output connector:
Type A (19 pin)
LASER Specification
Class 1 LASER Product
Wave length:
Class 1 LASER Product
Wave length:
790 nm (CDs) / 660 nm (DVDs) / 405 nm (BDs)
Laser power:
No hazardous radiation is emitted with the safety protection
* This unit supports “HDAVI Control 5” function.
Note:
Specifications are subject to change without notice.
Specifications are subject to change without notice.
Solder:
This model uses lead free solder (PbF).
Refer to their respective original service manuals for *1.
15
4.1.
Others (Licences)
16
Click on the first or last page to see other SA-BTT190EB / SA-BTT190EG / SA-BTT190EP / SA-BTT190GN / SA-BTT195EE / SA-BTT195EP / SC-BTT195EEK service manuals if exist.