Panasonic SA-BTT190EB / SA-BTT190EG / SA-BTT190EP / SA-BTT190GN / SA-BTT195EE / SA-BTT195EP / SC-BTT195EEK Service Manual ▷ View online
37
9.2.2.
Error Code Table 2 (For BD)
Error Code
Diagnosis contents
Description
Monitor Display
Automatic FL display
F00
F34
F58
F74
F75
F99
UNSUP-
PORT
PORT
No display
No display
NO READ
HARD
ERR
ERR
No display
No display
No display
No display
No display
No display
No error information
Initialization error
Drive hardware error
HDMI Device Key
Communication error
Communication error
HDMI Device Key
Loading error
Loading error
"F99" is displayed utill the
[POWER] key is pressed.
[POWER] key is pressed.
It is displayed for 5 seconds.
The character indication flows
sideways.
The character indication flows
sideways.
Hang-up
Unsupported disc error
Disc read error
Drive error
“This disc is
incompatible.”
incompatible.”
“Cannot read.
Please check the
disc.”
Please check the
disc.”
“BD drive error.”
Initial setting for error code in memory (Error
code Initialization is possible with error code
initialization and main unit initialization).
code Initialization is possible with error code
initialization and main unit initialization).
When initialization error is detected after starting
up main microprocessor, the power is
turned off automatically. The event is saved in
memory.
up main microprocessor, the power is
turned off automatically. The event is saved in
memory.
When drive unit error is detected, the event is
saved in memory.
saved in memory.
This error is displayed when the information
error is occurred at HDMI device key loading.
error is occurred at HDMI device key loading.
This error is displayed when the key of loaded
is illegal at HDMI device key loading.
is illegal at HDMI device key loading.
Displayed when communication error has
occurred between Main microprocessor and
Timer microprocessor.
occurred between Main microprocessor and
Timer microprocessor.
*An unsupported format disc was played,
although the drive starts normally.
*The data format is not supported, although
the media type is supported.
*Exceptionally in case of the disc is dirty.
although the drive starts normally.
*The data format is not supported, although
the media type is supported.
*Exceptionally in case of the disc is dirty.
*A disc is flawed or dirty.
*A poor quality failed to start.
*The track information could not be read.
*A poor quality failed to start.
*The track information could not be read.
The drive detected a hard error.
It is displayed for 5 seconds.
The character indication flows
sideways.
The character indication flows
sideways.
F74
F75
F99
No READ
UNSUPPORT
HARD ERR
38
9.2.3.
Error Code Table 3 (For BD)
9.2.4.
Error Code Table 4 (Power Supply & Digital Amplifier)
SELF
CHECK
CHECK
Restoration operation
Since the power cord fell out during a
powerfailure or operation, it is under
restoration operation.
*It will OK, if a display disappears
automatically. If a display does not
disappear, there isthe possibility that
defective Digital P.C.B. /BD drive.
powerfailure or operation, it is under
restoration operation.
*It will OK, if a display disappears
automatically. If a display does not
disappear, there isthe possibility that
defective Digital P.C.B. /BD drive.
No display
No display
No display
No display
PLEASE
WAIT
WAIT
Unit is in termination
process
process
Unit is in termination process now.
BYE
is displayed and power will be turned off.
UNFOR-
MAT
MAT
Unformatted disc error
The error is displayed when the unformatted
DVD-RAM/DVD-RW or the DVD-RW
recorded by another make of recorder is
inserted.
You have inserted an unformatted DVD-RAM
or DVD-RW that is unformatted or
recordedon other equipment.
DVD-RAM/DVD-RW or the DVD-RW
recorded by another make of recorder is
inserted.
You have inserted an unformatted DVD-RAM
or DVD-RW that is unformatted or
recordedon other equipment.
No PLAY
When there is a viewing
restriction on a BD-Video
or DVD-Video.
restriction on a BD-Video
or DVD-Video.
Rating password is set.
Error Code
Diagnosis contents
Description
Monitor Display
Automatic FL display
The character indication flows
sideways.
sideways.
This disc is not formatted properly.
Format the disc in DISC
Management
Format the disc in DISC
Management
SELF CHECK
PLEASE WAIT
UNFORMAT
No PLAY
Error
Code
F61
The abnormalities
in an output or power
supply circuit of
POWER AMP
Fan unit & its
circuitries
circuitries
F76
Abnormality in the
output voltage of
stabilized power
supply
Diagnosis Contents
Description of error
In normal operation, when DCDET2 goes
to "L" (Low) (Not during POWER OFF
condition), F61 appears on FLDisplay
for 1 second and PCONT goes to
"L" (Low).This is due to speaker output
has DC voltage or fan is not working.
In normal operation when DCDET1 is
detected "L" (Low) for two consecutive
times, F76 is displayed on FL for
1 second and after that PCONT will be
turned to "L" (Low). This is due to any of
the DC voltages (+9V, +7V, -7V, +5V,
+5.3V etc.) not available.
Automatic FL Display
Remarks
Press [ STOP] on main
unit for next error.
Press [ STOP] on main
unit for next error.
F76
39
9.3.
To enter into Service Mode
The following are the procedures to enter into service mode:
1. Turn the power off.
2. Press the [5] [9] and [R] button simultaneously for five seconds, then [70 RET] is displayed on FL.
2. Press the [5] [9] and [R] button simultaneously for five seconds, then [70 RET] is displayed on FL.
3. Press the [
] or [
] button to select until [80 SRV] is displayed on FL.
4. Press the [OK] button.
5. It is displayed on FL as [SERV].: it is shown to have entered the service mode.
6. The command is transmitted by attached remote control
5. It is displayed on FL as [SERV].: it is shown to have entered the service mode.
6. The command is transmitted by attached remote control
Method of making clear service mode: Press the power button (power off).
The display of information to each command is as follows.
NOTE:
Do not use it excluding the designated command.
The display of information to each command is as follows.
NOTE:
Do not use it excluding the designated command.
40
9.3.1.
Service Mode Table 1
When the drive is applicable drive.
When the drive is not applicable
drive.
drive.
9.2. Error Code.
Checking whether the drive is applicable
drive or not
drive or not
6. BOOT2 version
7. BOOT3 version
7. BOOT3 version
Click on the first or last page to see other SA-BTT190EB / SA-BTT190EG / SA-BTT190EP / SA-BTT190GN / SA-BTT195EE / SA-BTT195EP / SC-BTT195EEK service manuals if exist.