Panasonic CS-XE9EKE / CU-XE9EKE / CS-XE12EKE / CU-XE12EKE Service Manual ▷ View online
53
16.2. Filter Cleaning Device Complete Removal Instructions
Tools Required:
• Screw driver (+ type)
• Cutter
• Cutter
Switch off the power supply and unplug before cleaning or servicing.
1. Remove the front intake grille.
2. Push to remove top intake grille.
3. Release 2 caps and unscrew.
4. Unscrew and then remove the particular piece (right).
3. Release 2 caps and unscrew.
4. Unscrew and then remove the particular piece (right).
5. Unscrew and remove the particular pieces (left and bottom).
Caution: The particular piece (bottom) may drop out while
removing.
removing.
6. Remove terminal cover.
7. Cut the cable tie.
7. Cut the cable tie.
54
8. Remove all connectors from the PCB.
9. Remove screws (5 pieces).
10. Lift the filter cleaning device gently to remove.
10. Lift the filter cleaning device gently to remove.
55
16.3. Ventilation Device Removal Instructions
1. Cut the cable tie and remove the flexible hose connector.
2. Unscrew (1 piece).
2. Unscrew (1 piece).
3. Disconnect the connector.
4. Unscrew (2 pieces).
4. Unscrew (2 pieces).
5. Disconnect the ventilation device from the duct.
6. Remove the ventilation device.
6. Remove the ventilation device.
56
16.4. Gear Removal Instructions
1. Unscrew (3 pieces).
2. Remove the gear.
3. Disconnect the connector from the gear.
Click on the first or last page to see other CS-XE9EKE / CU-XE9EKE / CS-XE12EKE / CU-XE12EKE service manuals if exist.