DOWNLOAD Panasonic CS-XE9EKE / CU-XE9EKE / CS-XE12EKE / CU-XE12EKE Service Manual ↓ Size: 7.38 MB | Pages: 79 in PDF or view online for FREE

49

1. Open and release the Intake Grille complete (Front). (Fig. 1)

Fig. 1

2. Remove the Intake Grille Complete (Top). (Fig. 2)
3. Remove the Front Grille Complete (Right) by releasing the 2 screws.
(Fig. 2)
4. Remove the Front Grille Complete (Left) by releasing the 2 screws.
(Fig. 2)
5. Remove the 2 Plate Cover. (Fig. 2)

Fig. 2

6. Remove the Control Board Cover. (Fig. 3)

Fig. 3

7. Remove the Particular Piece by screw. (Fig. 4)
8. Remove the Earth Wire screws. (Fig. 4)
9. Releasing CN-STM4, CN-STM2, CN-STM1, CN-ACLN, CN-STM3,
CN-SW & CN-DISP (Fig. 4)

Fig. 4

50

10. Releasing the CN-FM, CN-FB, CN-CLNSW, CN-TH, CN-SIDESW,
CN-VENT & CN-AUTO. (Fig. 5)
11. Releasing the 2 Terminals (Brown and Black)
.

Fig. 5

12. Releasing the AC02 terminal.
.

Fig. 6

13. Slide out the Indoor Electronic Controller. (Fig. 7)

Fig. 7

51

14. Remove the Auto Cleaning Complete by releasing the 5 screws.
(Fig. 8). For detailed instructions, please refer to 16.2 Filter Cleaning
Device Complete Removal Instructions.

Fig. 8

15. Remove the Control Board by releasing the screw. (Fig. 9)

Fig. 9

16. Pull out the Drain Hose (behind the Discharge Grille) from outlet to
remove the Discharge Grille. (Fig. 10)

Fig. 10

17. Release the 3 screws Fan Motor Cover. (Fig. 11)
18. By pressing down the hook at the left, you will be able to remove the
Fan Motor Cover. (Fig. 11)

Fig. 11

52

19. Remove the screw at the Cross Flow fan. (Fig. 12)

Reminders:-
To reinstall the Fan Motor, please adjust the connector location is posi-
tioned 45

q with Fan Motor before fixing Control Board Cover. (Fig. 12)

Fig. 12

20. Remove the Bearing. (Fig. 13)
21. Remove the 2 screws at the left of the Evaporator. (Fig. 13)

Fig. 13

22. Push up the Evaporator and pull out the Cross Flow Fan from shaft.
By then, Fan Motor can be taken out. (Fig. 14)

Fig. 14