Panasonic CS-W18MKD / CS-W24MKD / CU-W18MKD / CU-W24MKD Service Manual ▷ View online
45
Airflow direction (Horizontal, Vertical) Control
o
During any operation mode combines with Patrol operation, airflow direction follows respective operation
mode.
o
During Patrol individual operation if e-ion starts, only Auto Air Swing is allowed. Even if “Air Swing” button is
pressed, no signal is sent to air conditioner, and no change on LCD display.
o
During Patrol individual operation if e-ion stops, Airflow direction louver closed.
LED
display
o
When Patrol operation is selected, Patrol LED illuminates.
o
During Patrol individual operation, only Patrol LED illuminates. When e-ion air purifying operation starts
based on dirtiness level, Power LED, Patrol LED and e-ion LED illuminates.
PATROL
LED
E-ION
TIMER
No Description
BLUE
ORANGE
RED
BLUE
ORANGE
1 When patrol function is not selected
OFF
OFF
OFF
-
-
2 During gas sensor error detection
control
OFF OFF Blinking OFF OFF
3 During E-ion abnormal discharge
error
OFF OFF OFF
Blinking
OFF
4 During E-ion breakdown error
OFF OFF OFF
Blinking
Blinking
5 During Test Mode
OFF
OFF
OFF
OFF
OFF
6 During stop
OFF
OFF
OFF
OFF
OFF
7 2 minutes gas sensor initial stabilization time (Level 0)
ON
OFF
OFF
OFF
OFF
a. Dirtiness level 0
ON
OFF
OFF
OFF
OFF
a
1
. Dirtiness level 1 shift to 0
OFF
ON
OFF
OFF
OFF
b. Dirtiness level 1
OFF
ON
OFF
ON
OFF
8
During patrol
operation
operation
c. Dirtiness level 2
OFF
OFF
ON
ON
OFF
Remote Control Receiving Sound
o
Normal
Operation
Î
Patrol Mode
: Beep
o
Patrol
Mode
Î
Stop
: Long Beep
o
Patrol
Mode
Î
Normal Operation
: Beep
o
Stop
Î
Patrol
: Beep
Timer
Control
o
When ON timer activates when unit stops, previous operation resumes and restored last saved Patrol
operation status.
o
When ON timer activates during any operation, no change and carry on current operation.
o
When OFF timer activates during any operation, all operation stops and the latest Patrol operation status is
saved.
Power Failure Control
o
During Patrol individual operation, if power failure occurs, after power resumes, Patrol individual operation
resumes immediately.
o
During combination operation, if power failure occurs, after power resumes combination operation resume
immediately.
46
Patrol Operation Demo Mode
o
Patrol Operation Demo Mode start condition
Press “Set” button continuously for 15 seconds by using pointer during Air Conditioner is OFF condition
to enter internal setting mode.
Press “Timer Decrement" button to select “Pt demo”.
Press “Timer Set” button to toggle Patrol operation demo mode.
Long "beep": Turn OFF Patrol operation demo mode.
Short "beep": Turn ON Patrol operation demo mode.
SET
SET
Transmit Patrol default OFF/ON code
(Buzzer: OFF:Long Beep, ON:Short Beep)
(Buzzer: OFF:Long Beep, ON:Short Beep)
Press continously for 15s
SET
Transmit Patrol demo code
(Buzzer: OFF:Long Beep, ON:Short Beep)
(Buzzer: OFF:Long Beep, ON:Short Beep)
SET
Transmit ECO demo code
(Buzzer: OFF:Long Beep, ON:Short Beep)
(Buzzer: OFF:Long Beep, ON:Short Beep)
SET
Transmit check code
(Buzzer:Short Beep)
(Buzzer:Short Beep)
o
The Patrol indicator change color every 10 seconds follows the pattern below for demo purpose:
BLUE
(10 seconds)
(10 seconds)
ORANGE
(10 seconds)
(10 seconds)
RED
(10 seconds)
o
During demo, all operation stops, remote control buttons and auto OFF/ON button are ignored.
o
Patrol Operation Demo Mode stop condition
Power supply reset.
47
12.15
E-ion operation
This operation provides clean air by producing negative ions to attract dust captured at the positively charged
active e-ion filters.
e-ion operation start condition
o
During unit running at any operation mode, if “e-ion” operation is selected, combination operation (operation
mode + e-ion operation) starts.
o
During unit is OFF, if “e-ion” operation is selected, e-ion individual operation starts.
e-ion operation stop condition
o
When “OFF/ON” button is pressed to stop the operation.
o
When “PATROL/e-ion” button is pressed.
o
When OFF Timer activates.
e-ion operation pause condition
o
When indoor fan stop (during deice, odor cut control, thermostat off, etc.). e-ion operation resume after
indoor fan restarts.
o
When indoor intake temperature ≥ 40°C. e-ion operation resume after indoor intake temperature < 40°C
continuously for 30 minutes.
Indoor
fan
control
o
During any operation mode combines with e-ion operation, fan speed follows respective operation mode.
o
During e-ion individual operation – only Auto Fan Speed and no Powerful operation is allowed. Even if Fan
Speed button is pressed, no signal is sent to air conditioner, and no change on LCD display.
Auto Fan Speed for e-ion operation switches from SHi to Hi after 4 hours of operation.
Auto Fan Speed for e-ion operation switches from SHi to Hi after 4 hours of operation.
Airflow direction control
o
During any operation mode combines with e-ion operation, airflow direction follows respective operation
mode.
o
During e-ion individual operation, only Auto Air Swing is allowed. Even if Air Swing button is pressed, no
signal is sent to air conditioner, and no change on LCD display.
Timer
control
o
When ON timer activates when unit stops, previous operation resumes and restored last saved e-ion
operation status.
o
When ON timer activates during any operation, no change and carry on current operation.
o
When OFF timer activates during any operation, all operation stops and the latest e-ion operation status is
saved.
Indicator
o
When e-ion operation starts, e-ion indicator ON.
Remote Control Receiving Sound
o
Normal
Operation
Î
e-ion Operation
: Beep
o
e-ion
Operation
Î
Normal Operation
: Beep
o
Stop
Î e-ion individual Operation
: Beep
o
e-ion individual Operation
Î
Stop
:
Long
Beep
Power
failure
o
During e-ion individual operation, if power failure occurs, after power resumes, e-ion individual operation
resumes immediately.
o
During combination operation, if power failure occurs, after power resumes, combination operation resume
immediately.
o
e-ion operation status is not memorized after OFF the unit. After OFF, when the operation is ON again, air
conditioner operates without e-ion operation.
48
e-ion
Check
Mode
o
e-ion abnormality check mode
o
Purpose is to improve sensor serviceability when sensor is malfunction.
(1) Control starting condition
When all of the conditions are formed
Not in Patrol Demo mode.
e-ion operation ON.
When e-ion check mode signal is received; the procedure of selection is as shown:
Press “Set” button continuously for 15 seconds by using pointer to enter internal setting mode.
Press “Timer Decrement" button to select “CHC”.
Confirm setting by pressing “Timer Set” button, a “beep” sound will be heard.
SET
SET
Transmit Patrol default OFF/ON code
(Buzzer: OFF:Long Beep, ON:Short Beep)
(Buzzer: OFF:Long Beep, ON:Short Beep)
Press continously for 15s
SET
Transmit Patrol demo code
(Buzzer: OFF:Long Beep, ON:Short Beep)
(Buzzer: OFF:Long Beep, ON:Short Beep)
SET
Transmit ECO demo code
(Buzzer: OFF:Long Beep, ON:Short Beep)
(Buzzer: OFF:Long Beep, ON:Short Beep)
SET
Transmit check code
(Buzzer:Short Beep)
(Buzzer:Short Beep)
o
If abnormal discharge is detected at filter (short-circuited) due to water or dust adhesion, etc., the e-ion
indicator blinks immediately.
Click on the first or last page to see other CS-W18MKD / CS-W24MKD / CU-W18MKD / CU-W24MKD service manuals if exist.