DOWNLOAD LG WT5070CW Service Manual ↓ Size: 12.27 MB | Pages: 53 in PDF or view online for FREE

This button
allows
you to store a
customized
wash
cycle for
future use .

This includes
an extra
rinse cycle
for a better
rinsing
action. 

Causes the
dispensing of
fabric
softener in
the final rinse
cycle.

Use to lock or unlock the
control buttons to
prevent settings from
being changed.
To actuate or release
the CHILD LOCK, press
and hold the SIGNAL
button until the lock is
turned ON or OFF.

The beeper sounds at
the end of the cycle.
The clothing should be
removed at that time to
prevent the setting of
wrinkles. 
Touch the SIGNAL
button to cycle through
the volume settings
between OFF and high. 

Use to start or pause the wash
cycle.
Changes while be made to the
wash settings while the machine
is paused.
Repeats start and pause by
pushing the button.

Use for selecting wash program.
This button allows the selection of 12
different programs for different kinds
of laundry and dirtiness.
Program selections light up in
sequence as follows:
Cotton/Normal

▶Perm Press Casual

▶Heavy Duty▶Bulky/Bedding ▶
Bright Whites“▶Tub Clean▶Baby
Wear▶Towels▶Sports Wear▶Pure
Color“▶Speed Wash▶Wool
Select the desired program by
turning the knob.

When There Is The Possibility Of Freezing Temperatures

• Close the water taps and remove the water supply hoses.
• Remove the water which remains in the water supply.
• Lower the drain hose and drain the water in the sump and the drain hose by running a spin cycle. 

Cleaning The Inside Of Your Washer

If you use fabric softener or do regular COLD water washing, it is very important that you
clean the inside of your washer occasionally as described below. 
• Fill your washer with HOT water.
• Add 1 cup of bleach. 
• Let it operate for several minutes.
• Stop the washer, open the lid, and leave it to soak overnight.
• After soaking, drain the washer and run it through a normal cycle.

Products That Might Damage Your Washing Machine

• Concentrated bleaches and diaper sanitizer will cause damage to the paintwork and components of

your washer.

• Hydrocarbon solvents, i.e. gasoline, kerosene, paint thinners, and lacquer thinners, etc. can dissolve plastic

and blister paint.
(Be careful when washing garments stained with these solvents as they are flammable; DO NOT put
them in washer or dryer.)

• Some pretreatment sprays or liquids can damage your washer’s control panel.
• Use of dyes in your washer may cause staining of the plastic components. The dye will not damage

the machine but we suggest you thoroughly clean your washer afterwards. We do not recommend
the use of dye strippers in your washer.

• Do not use your washer lid as a work surface.

If Frozen

• Remove the water supply hose and immerse it in HOT water. (40° C or 104° F).
• Pour approximately 2 liters (

½ gallon ) of HOT water (40° C or 104° F) into the sump and allow it to stand for

at least 10 minutes. 

• Connect the water supply hose to the water tap. Run an Express Wash cycle to confirm that the machine fills,

drains, and operates properly. 

Leave the lid open after washing to allow moisture to evaporate. If you
want to clean the inner-tub use a clean soft cloth dampened with liquid
detergent, then rinse. (Do not use harsh or gritty cleaners.)

Hoses connecting washer to faucet should be replaced every 5 years.

Immediately wipe off any spills. Wipe with damp cloth. Avoid hitting surface with sharp objects.

Be sure water supply is shut off at faucets. Drain all water from hoses if weather will be
below freezing.

▶ Be sure to unplug the power to repair and replace

electric parts.

Be sure to follow proper ESD and grounding
precautions for diagnosis and repair. If this is not
possible, touch the ground wire on a regular basis to
remove any static charge built up on your person. 

① Remove 5 panel screws attaching the panel on the

back. 

② Remove the rear panel.

③ Pull the front panel forward.
④ Disassemble the protective cover.
⑤ Disconnect the leads from the controller.

⑥ Remove 8 screws on the PCB assembly.
⑦ Remove the PCB assembly.

Rear Panel

Main PCB

Protect Cover

Display PCB