LG WT-R854 Service Manual ▷ View online
20
3-5. OTHER FUNCTIONS
1) Delay Wash (Reservation)
4
5
7
8
9
Note
Press the POWER button to turn power on.
Press the CYCLE button to select the washing program.
Press the Delay Wash (Reservation) button.
Delay Wash (Reservation) is used to delay the finishing time of the operation. The hours to be delayed can be set
by the user accordingly. The time on the display is the finishing time, not the start time.
by the user accordingly. The time on the display is the finishing time, not the start time.
The light of 'Delay Wash' will be turned on and ‘TIME LEFT’
will be marked.
will be marked.
Press the button repeatedly to set the desired finishing time. For
example, To finish washing in 9 hours from now, by make the number
9:00 pressing the Delay Wash (Reservation) button repeatedly.
example, To finish washing in 9 hours from now, by make the number
9:00 pressing the Delay Wash (Reservation) button repeatedly.
(RES.=Delay)
Press the START/PAUSE button.
Finish
When you press the START/PAUSE button the light will blink.
The washing will be finished according to the delayed time.
Finishing time can be delayed from 1~24 hours. Delaying from 1~12 hours can be done in 1 hour time intervals and from 12~24 hours
in 2 hour time intervals.
in 2 hour time intervals.
If the lid is open, the machine will not work, and an alarm Signal or “ ” will remind you to close the lid.
To select Spin Speed, water temp. or soil level manually, press the Delay Wash (Reservation) button and select the desired option.
Then press the START/PAUSE button.
When the laundry cannot be taken out immediately after the wash program ends, it is better to omit the spinning program. (The laundry
will be wrinkled if left for a long time after spinning.)
To select Spin Speed, water temp. or soil level manually, press the Delay Wash (Reservation) button and select the desired option.
Then press the START/PAUSE button.
When the laundry cannot be taken out immediately after the wash program ends, it is better to omit the spinning program. (The laundry
will be wrinkled if left for a long time after spinning.)
6
Select desired Options.
SOIL LEVLE, WASH/RINSE, SPIN SPEED, BEEPER, SOAK, EXTRA RINSE
1
2
Add the laundry into the washing tub.
Add the Detergent
When the lid is open the machine will not operate, and an alarm
Signal or “ ” will remind you to close the lid when it starts.
Signal or “ ” will remind you to close the lid when it starts.
3
Close the lid
21
2) Soak Wash
1
2
Add the laundry into the washing tub.
Add the Detergent.
Use this mode to wash normal clothes or thick and heavy clothes which are excessively dirty.
Soak mode can be used all program except Rinse/Spin.
Soak mode can be used all program except Rinse/Spin.
Add the detergent in the right-hand compartment
for Soak Wash cycle and in the middle compartment
for main wash cycle.
for Soak Wash cycle and in the middle compartment
for main wash cycle.
3
Note
The Soak wash cycle run prior to the main wash cycle.
For some cycles,the water temperature for the soak cycle may not be the same as the water temperature for the
main wash cycle.
For some cycles,the water temperature for the soak cycle may not be the same as the water temperature for the
main wash cycle.
4
5
7
8
Press the POWER button to turn power on.
Press the CYCLE button to select the washing program.
Press the Soak button to change the soaking time.
Press the START/PAUSE button.
The following settings are indicated as the button is
pushed.
15
pushed.
15
30
45
60
120
180min
SOAK OFF
Select the cycle for laundry on the Control Panel.
6
Select desired Options.
SOIL LEVLE, WASH/RINSE, SPIN SPEED, BEEPER, EXTRA RINSE
When the lid is open the machine will not operate, and an alarm
Signal or “ ” will remind you to close the lid when it starts.
Signal or “ ” will remind you to close the lid when it starts.
Close the lid
22
3) Extra Rinse
This Program gives additional rinse cycle.
Note
This CYCLE is for better rinsing effect.
1
2
4
5
Press the POWER button to turn power on.
Press the CYCLE button to select the washing program.
Press the Extra Rinse button to give additional rinse cycle.
Press the START/PAUSE button.
3
Select desired Options.
SOIL LEVLE, WASH/RINSE, SPIN SPEED, BEEPER, SOAK, DELAY WASH
23
4) Custom Program
Custom Program allows you to store a customized wash cycle for future use.
Note
To recall your Custom cycle.
1. Press POWER on.
2. Select the Custom cycle by pressing the Custom Program button.
3. Press the START/PAUSE button. Then the wash cycle starts.
1. Press POWER on.
2. Select the Custom cycle by pressing the Custom Program button.
3. Press the START/PAUSE button. Then the wash cycle starts.
1
2
Add the laundry into the washing tub.
Add the Detergent
When the lid is open the machine will not operate, and an alarm
Signal or “ ” will remind you to close the lid when it starts.
Signal or “ ” will remind you to close the lid when it starts.
3
Close the lid
4
5
6
7
Press the POWER button to turn power on.
Press the CYCLE button to select washing program.
Press the Custom Program button for 3 seconds to store your Custom wash
cycle.
cycle.
Select desired Options.
SOIL LEVLE, WASH/RINSE, SPIN SPEED, BEEPER, SOAK, EXTRA RINSE, DELAY WASH
8
Press the START/PAUSE button.
Click on the first or last page to see other WT-R854 service manuals if exist.