DOWNLOAD LG WT-H8006 Service Manual ↓ Size: 3.85 MB | Pages: 57 in PDF or view online for FREE

• Use to select Water

Temperature. 
Pressing the button allows
you to select  COLD
WARM (HOT&COLD)
HOT    COLD
respectively. 

• This button is used for air-

drying of your laundry.

• Air dry selections light up in

sequence as follows.
60    90    120    60 as the
button is pushed.

• Press the button for 3 seconds

to select and press the Power
botton to cancel the operation.

• This button allows you

to select the strength of
the wash action.

• Power option selections

light up in sequence as
follows Normal    Heavy   

Light    Normal as the

button is pushed.
This can be selected for
any program.

• Adjustment can be made

while washing.

• Use this when

you want to dry
Tub.

• This can be

set/canceled by
pressing the Wash
button and Rinse
button
simultaneously. 
(refer to page 22)

• Use when wash, rinse, spin

time need to be adjusted.

• The time increases when the

button is pressed. 

• If adjustments are needed

during the wash, press the
[start/pause] button before
making any changes. 

• When the button is  pressed

during washing, the
remaining time is displayed. 

• Use to lock or unlock the

control buttons to prevent
settings from being
changed by a child. 
To lock, push the RINSE
and SPIN buttons
simultaneously and to
unlock push them one
more time during the
washing process. 
(refer to page 25)

• Use to select the proper amount of water in

relation to the weight and type of laundry.

• Automatically controlled, but can be selected

manually by pressing the WATER LEVEL
Button. 

• WATER LEVEL is automatically selected for

FUZZY program.
The following settings are indicated as the
button is pushed 
7    8    9    10    1    2    3    4    5    6    7

• Time left - During operation, the remaining

time is indicated.

• DELAY START INDICATION

(RESERVATION) - When DELAY START
(RESERVATION) program is selected, it
indicates the finishing time. (RES.=DELAY)

• Alarm indication - When an error occurs, an

error message appears to indicate the
abnormality. For example,        indicates that
the lid is open.

* For optimizing the washing algorithm, the displaying time may be changed during washing-increased by 8minutes at

maximum and decreased by 4 minutes at maximum. 

* If the Detergent quantity is excessive,the machine will automatically add one or two rinses in order to improve the

rinse performance. 

* The Detergent sensor will make algorithm changes to compensate for detergent quantity, only if the detergent powder

is synthetic based, If a liquid or organic based detergent is used, or too much bleaching agent, the detecting ability of
the sensor may be decreased.

• Use to set a delayed finishing

time. 

• The time increases when the

button is pushed.

• The following settings are

indicated as the button is pushed
3    4    5    ...11    12    14    16
...46    48    3 HOUR.

• To cancel delay time, turn the

power switch off.
(refer to page 24)

• Use for selecting wash program.
• This button allows you to  select 8

different programs for different kinds of
laundry and soil condition.

• program selections light up in sequence

as follows: FUZZY    WOOL    QUICK
WASH    JEANS    ECO COTTON
SILENT    FAVORITE    TUB CLEAN

FUZZY etc. Select the desired

program by pressing the button.

• Use to start or pause the

washing process. 

• Repeats start and pause by

pushing the button.

• It only operates in FUZZY Program.
• During sensor detection, the LED flashes green, orange and red in turn. And, after detecting, the LED lights a

specific color according to the detecting condition as follows:  

If the current washing condition (Detergent quantity, Water Temperature, water quality, etc.) is determined
as better than the standard one, it optimizes the algorithm to save the energy by decreasing washing
time/strength, and the LED automatically turns to red.  
If the current washing condition is determined as worse than the standard one, it optimizes the algorithm by
increasing washing time/strength, and the LED automatically turns to orange.
If the current washing condition is determined as equal to the standard one, the algorithm has no change
and the LED turns to green.

• Use to turn the power on or off.
• Push again and power goes on or off 
• The power goes off automatically

about 10 seconds after the wash is
finished.

* As the detecting ability of the sensor may be decreased over time, a tub clean cycle periodically is recommended.

* Even if the water level or the water temperature are changed by the user in FUZZY Program, the sensor will still

work. The sensor algorithm may differ according to models. 

* The control panel may differ according to different models.

This program is for mixed fabrics
as normal operation. It is
automatically selects the most
appropriate wash conditions such
as wash action and cycle times by
utilizing the built-in load sensor.

• Add the appropriate

quantity of Detergent as
indicated by the
WATER LEVEL next to
WATER DETERGENT.
Or follow the Detergent
manufacturer’s
instructions

• Use neutral Detergent

appropriate for the
laundry.

• When washing woolens

use a mild Detergent
recommended for
washing wool.

• Select the

WOOL
program on
the Control
panel.

• Add the appropriate

quantity of Detergent as
indicated by the
WATER LEVEL next to
WATER DETERGENT.
Or follow the Detergent
manufacturer’s
instructions

• Select the

QUICK
WASH
program on
the Control
panel.

• Select the

JEANS
program on
the Control
panel.

• Select the 

ECO COTTON
program on the
Control panel.

• Spread

the jean
evenly in
the tub

Use this program for washing
delicate fabrics such as lingerie and
woolens. (wash only “water
washable” clothes) Before washing
your woolens check the care label
for the washing instructions. 
(wash only water washable clothes)

Use this mode when washing
lightly soiled clothes for a short
time. The highly recommended
laundry amount is under 2.0kg.

Use Jean program when washing
Jeans of different sizes

Eco Cotton is the program for
normally soiled cotton material
and designed to minimize water
consumption.

• The pulsator rotates for

8 seconds to detect the
laundry load.

• Then the WATER

LEVEL and the amount
of Detergent to be
used will be shown and
water will be supplied.

• Water will be let in

again 2 minutes
after the wash has
started to
supplement the
water the laundry
has absorbed.

• When the wash

program ends, the
chime will sound
for 10 seconds
before the Power
goes off goes off
automatically.

• If water is already in the tub, or putting

wet laundry into the tub before starting will
increase the WATER LEVEL. 

• With lightweight bulky loads, WATER

LEVEL can be set low.  

• Changes to Water Temperature

(HOT/COLD) and wash level are possible
during operation.
(refer to page 14)

• When setting the WATER LEVEL manually,

do not set below level number 6 in order to
prevent damage to the woollen clothes.

• Washing with HOT water may damage the

laundry (Water is set to cold automatically).
Ensure that the load is under 2kg.

• In order to avoid  damage to laundry, the

spin cycle may appear slow.
This also avoids wrinkles and clothing may
still contain some water. This is normal.

• When static pressure of water is more

than 2kg/cm

2

, the QUICK WASH course

will be within 19min.