DOWNLOAD LG WT-E1275TP Service Manual ↓ Size: 2.31 MB | Pages: 71 in PDF or view online for FREE

■ Manual control

• Other programmes are selected as follows.
• Press POWER ON button.
• Load clothes.
• Add detergent, bleach and conditioner as desired.

• Select temperature, level, process, program and options as

described below.

• Close the lid and press START/PAUSE button.

• Use it to select washing programs.
• By turning the program dial, it cycles 

[FUZZY] 

➔

[INTERNET CONTROL]

➔

[FAVOURITE] 

➔

......

• Use it to turn on and off.

By pressing the button 
[On 

➔

Off] are repeated.

• Electrical power automatically turns off 10sec,

after the washing cycle finishes with “boo~”
sound.

• Electric power automatically turn off after 10min.

in ‘Pause’ condition.

• Please this button in order to

cancel in the course of setting
Washing, Rinse, Water
Removal or Reservation etc
with the washing machine
temporily stop.

• Pressing the Cancellation

button in the course of setting
returns to the course screen.

• Please use this button in order

to return the course screen
while using Help function.

• Please use this when desiring

to receive all types of
information and washing course
though Internet by connecting
the washing machine to
computer.

• Please remove the protection

cover and plug-in cables for PC
connection.

• Please always plug-in them in a

proper position when not using
them.

• Use it to start or

pause. 
By pressing the
button [Start 

➔

Pause] are
repeated.

• Please use this button in

order to refer contents of
Explanation for Every
Button and Course,
Washing Guide,
Commonsense for
washing, Before declaring
Failure or Selection of
Initial Screeen etc.

• Initial List of Help screen

always appear if pressing
the Help button.

• Buzzer sound rings and the screen shows abnormal status

immediately after railure occurs such opening of cover or
abnormal water supply or discharge during washing.

- PE : Abnormal water sensor (No Sensing Water Levels)
- LE : Abnormal motor (No Spin)
- UE : Unbalanced load
• If selecting contents desiring to know in operation of the

help button, details of explanation appear.

tton, the

course are

ring reservation

ing is displayed
topping it,

d water removal

Use this program for  washing woolens. (wash
only “water washable” clothes)

Use jeans program when washing heavy,
thick, and extremely dirty laundry such as
jeans and work outfits.

Use this mode for washing heavily dirty
laundry by soaking in water for some time
to remove proteins and fats.

Use this mode when washing lightly soiled
clothes for a short time. 

• Select the

WOOL
program.

• Select the

DELICATE
program.

• The inner-tub rotates for 10

seconds to detect the laundry
load.

• Then the Water Levels and the

amount of detergent to be
used will be shown and water
will be supplied.

• Select the

SPEEDY
program.

• Select the

JEAN
program.

• Select the SOAK

program. 

Use this program for washing delicate fabrics
such as lingerie.
Before washing your woolens check the care
label for the washing instructions.
(wash only “water washable” clothes)

It is normal to wash lower water level before the main wash.

• Select No. of rinse and spin time by

funing button.

Use for normal loads, this mode automatically
selects the most appropriate conditions and
completes the sequence in one operation.
The built-in sensor detects the size of the
load and the ideal wash power and wash,
rinse and spin times are set accordingly

• Use appropriate neutral

detergent for the laundry

• When washing woolens use a

mild detergent recommended
for washing wool.

• When the wash program

ends, the buzzer will ring
for 10 seconds before the
Power goes off
automatically.

• If water is already in the tub, or wet laundry is placed into

the tub water will be added to the optimal level before
washing starts..

• With lightweight bulky loads, water level can be set to

low. 

• Changes to water temperature (hot/cold) and wash level

are possible during operation. 

•  Water may splash out when washing light laundry such

as a cashmere blanket or bed sheet with water set at
high level. 

• Soak time is 80min

• Electrical power is

automatically off in
10sec. after buzzer
sounds.

• When setting the water level manually, do not set to MEDIUM

to prevent damage to laundry.

• Washing with hot water may damage the laundry 

(Water is set to  warm automatically). Ensure that the load 
is under 3,5kg

• In order to avoid  damage to laundry, 

the spin cycle may appear slow.
This also avoids wrinkles and clothing may still contain some
water. This is normal.

• Soak Wash cannot be selected for the Wool and Delicate

Wash program.

• For adding the appropriate

quantity of detergent follow
the detergent
manufacturer’s instruction.

Water will be supplied 
2 min. after the start of
the wash to
supplement the water
the laundry has
absorbed.

When the wash
program ends, the
buzzer will ring for 10
seconds before the
Power goes off
automatically.

Use this program for favourite wash
conditions.

• Select the

FAVOURITEprog
ram.

• Select the

SILENT program.

After inserting
blanket, press
it uniformly for
good washing
results.

Select the BLANKET
program.

Use this program for washing guiefly in
night.

It is normal to wash lower water level before the main wash.

Water level is automatically set to 
[EX-LARGE]. Deposit proper amount
of detergent.