LG WP-9251 Service Manual ▷ View online
TROUBLE
CAUSE
REPAIR METHOD
Spin Drying
While spinning, spin dryer
basket is unbalanced.
basket is unbalanced.
Installation is unbalanced.
Installed area is not level.
Installed area is not level.
Load in spin dryer basket is
unbalanced.
unbalanced.
Advise the customer to install the
washing machine in a more stable
location.
washing machine in a more stable
location.
Spinning operation is not
proper.
proper.
After opening spin dryer cover,
spin dryer basket continues
revolving.
spin dryer basket continues
revolving.
Others
No draining
When draining water, water
does not flow out smoothly.
does not flow out smoothly.
Noise
Water leakage/overflow
from panel
from panel
Bellows assembly is damaged.
Center between spin shaft and
coupling is unbalanced.
coupling is unbalanced.
Brake is defective.
Spin shaft is clogged.
Drain hose is clogged.
Bearing for bellows assembly is worn.
Brake is defective.
Vent is turned over or is not secure.
Vent is faulty.
Drain selector position is defective
or is not correct.
or is not correct.
Strap connection is defective.
Lint sticks to the filter or hoses.
Drain hose is clogged.
Lint is sticking to the plunger valve,
the filter or hoses.
the filter or hoses.
Blockage between the pulsator and
the tub.
the tub.
Bearing for pulsator shaft assembly
is worn.
is worn.
Bearing of bellows assembly is
worn.
worn.
Sponge out/dirty.
Water pressure very high.
Re-distribute the load.
Advise the customer of correct loading.
Replace with a new one.
Balance completely.
Adjust brake properly.
Remove blockage.
Remove blockage.
Replace with a new one.
Adjust brake properly.
Secure properly.
Replace with a new one.
Remove blockage.
Adjust properly.
Remove lint and clean.
Remove lint and clean.
Set drain selector to proper position.
Advise the customer.
Advise the customer.
Remove blockage.
Replace with a new pulsator shaft
assembly.
assembly.
Replace with bellows assembly.
Clean/Replalce
Check for water inlet pressure
(<20
l
/min.)
-17-
TROUBLE
CAUSE
REPAIR METHOD
Hose connection is not secured.
Others
Water leakage
Bearing for pulsator shaft assembly
is worn.
is worn.
Plunger valve bellows is damaged.
Plunger valve assembly is damaged.
Bellows assembly is damaged.
Bellows connection is not secured.
Secure firmly.
Replace with a new pulsator
shaft assembly.
shaft assembly.
Replace with a new one.
Replace with a new one.
Replace with a new one.
Secure firmly.
8. SCHEMATIC DIAGRAM
Single voltage
-18-
A-1
A-6
A-4
A-5
A-10
.
-20-
B-9
B-10
B-12
B-3
B-8
B-7
B-6
B-15
B-13
B-1
B-2
BO-2
B-4
C-1
C-2
C-3
C-4
Click on the first or last page to see other WP-9251 service manuals if exist.