DOWNLOAD LG WP-750RP Service Manual ↓ Size: 4.87 MB | Pages: 27 in PDF or view online for FREE

After removing the back cover, the panel assembly,
proceed as follows:

1. Open the spin dryer cover and separate  brake wire

strap from the brake wire assembly (Fig. 16).

After removing the back cover, proceed as follows:

1. Take hold of the front of the safety cover-1. 

2. Insert screw drive (“-”Type) into the hook position.

3. Pull the safety cover-1 upward (fig. 19).

2. Remove the Q-spring (Fig. 17).

3.Remove the screw fastening the door switch and

remove the door switch (Fig. 17).

4. Remove the spin dryer cover by widening between the

hinge hole of the top cover and the hinge of the spin
dryer cover and pulling up the spin dryer cover (Fig. 18).

5. Loosen the fixing bolt of the coupling assembly

fastening the spin shaft (Fig. 20).

6. Pull out completely the spin basket assembly (Fig. 21).

To assemble the spin dryer cover assembly, reverse
the disassembly procedure.

To assemble the spin dryer basket assembly, reverse
the disassembly procedure.

Fig. 18

Fig. 17

Fig. 16

Fig. 19

Fig. 20

Fig. 21

After removing the back cover, opening the spin dryer cover, and removing the spin dryer basket,
proceed as follows:

1. Remove the brake wire holder-A in the direction of 

the arrow (Fig. 22).

10. Loosen the fixing bolt fastening the motor shaft

and pull up the coupling assembly (Fig. 28).

11. Remove the screws fastening the brake assembly

and remove the brake assembly (Fig. 29).

To assemble the spin motor, reverse the
disassembly procedure.

2. Separate the brake wire assembly from the brake

wire holder (Fig.23).

3. Take out the brake wire assembly from the brake

assembly (Fig. 24).

Fig. 22

Fig. 23

Fig. 24

7. Hold the spin motor and remove the three hooks

from the base (Fig. 26).

8. Remove the spin motor.

9. Remove the screws fastening the vibration damper

assemblies and remove the vibration damper
assemblies (Fig. 27).

4. Disconnect the lead wires and remove the V-belt.

5. Lay the washing machine on its front side on a

blanket or cardboard.

6. Remove the screws fastening the base and

remove the base from the cabinet (Fig. 25).

Jig Push

Fig. 25

Fig. 26

Fig. 27

Fig. 28

Fig. 29

2. Disconnect the lead wires.

3. Lay the washing machine on its front side on a

blanket or cardboard.

4. Romove the screws fastening the base and

remove the base from the cabinet (Fig. 31).

5. Remove the screws and the washers, remove the

wash motor and remove the wash motor damper
(Fig. 32).

6. Loosen the socket bolt of the motor pulley

assembly and pull up the motor pulley assembly
from the motor.

To assemble the wash motor, reverse disassembly
procedure.

After removing the back cover and the spin dryer
basket, proceed as follows:

1. Remove the V-belt from the pulsator pulley (Fig. 30).

Fig. 30

Fig. 31

Fig. 32

Fig. 33

1. Remove the screws fastening the top cover and

remove the top cover from the cabinet.

After removing the panel assembly, the safety cover
assembly, the spin dryer basket assembly, the spin dryer
cover, the washing cover, the Q-spring, top cover assembly,
v-belt the door switch and the back cover, proceed as follows:

1. Lay the front side on a blanket or cardborad.

After removing the back cover and opening the washing
cover, proceed as follows:

1. Loosen the pulsator fixing screw and pull up the

pulsator(Fig. 36).

2. Disconnect the drain hose or the drain hose-D

(Pump model).

3. Remove the screws washing Tub(cabinet) (Fig. 35).

3. Unscrew and remove the screws fastening the

base and remove the base from the cabinet.

4. Lay the washing machine on its front side on a

blanket or some cardboard and remove the base
(Fig. 38).

To assemble the washing Tup(cabinet), reverse the
disassembly procedure.

Apply adhesive on hose joint to prevent
water leaks.

Fig. 34

Fig. 35

Fig. 36

Fig. 37

Fig. 38