DOWNLOAD LG WM3070HVA Service Manual ↓ Size: 18.46 MB | Pages: 61 in PDF or view online for FREE

2. FEATURES & TECHNICAL EXPLANATION

2-1. FEATURES

The larger drum enables not just higher head drop and stronger centrifugal force,
but also less tangling and wrinkling of the laundry. Heavier loads, such as king size
comforters, blankets, and curtains, can be washed.

The advanced brushless DC motor directly drives the drum without belt and pulley.

Tilted drum and extra large opening make it possible to load and unload clothing
more easily.

Steam washing features upgraded washing performance with low energy and water
consumption. SteamFresh

TM

cycle removes wrinkles from dry clothes.

Washing ball enhances the wash performance and reduces damage to the clothing. 
The jets spray and help tumble clothes to enhance washing performance while
maintaining fabric care.

Automatically detects the load and optimizes the washing time.

The child lock prevents children from pressing any button to change the settings
during operation.

2-2. NEURO FUZZY WASHING TIME OPTIMIZATION

To get the best washing performance, optimal time is determined by the water temperature,
the selected washing temperature, and the size of the load.

2-3. WATER LEVEL CONTROL

This model incorporates a pressure sensor which can sense the water level in the tub.

The water supply is stopped when the water level reaches the preset level, the washing
program then proceeds.

Spinning does not proceed until the water in the tub drains to a certain level.

washing time

rinsing time

the best
washing
performance

spin rhythm, time

SENSING

EFFECT

PROCESSING

DETERMINATION

The door can be opened by pulling the door handle whenever washer is not in operation.

When the cycle is completed, the DOOR LOCKED light will turn off.

If a power failure has occurred while in operation, the door will unlock after 5 minutes.

Clicking sounds can be heard when the door is locked/unlocked.

2-4. DOOR CONTROL

2-5. THE DOOR CAN NOT BE OPENED

While program is operating.

When a power failed and power plug is taken out in operation.

While Door Lock lights turn on.

White the motor is in the process of inertial rotating, through the operation is paused.

2-6. DOOR LOCKED LAMP LIGHTS

When the frequency of water level is lower than 22.9 kHz.

(It can be canceled when the frequency is more than 23.8 kHz.)

When the temperature inside the tub is higher than 45°C and water level is not 25.5 kHz.

(It can be canceled when the water level is 25.5 kHz or the temperature inside the tub is lower than 40°C.)

2-7. CHILD LOCK

Use this option to prevent unwanted use of the washer. Press and hold STAIN CARE button for 3

seconds to lock/unlock control.

When child lock is set, CHILD LOCK lights and all buttons are disabled except the POWER

button. You can lock the controls of the washer while washing.

CHILD LOCK lasts after the end of cycle. If you want to deactivate this function,

Press and hold the STAIN CARE button for 3 seconds. 

2-8. WATER CIRCULATION

When washing and rinsing function of shower at the upper part of Gasket.

When washing, it continuously operates for 3 minutes and intermittently.

When rinsing, it continuously operates after completion of water supply.

2-9. STEAM

For tough stained clothes, sick room linens, or baby clothes.

Steam Wash is available with Sanitary, Bulk/Large, Perm. Press, Cotton/Normal, and Baby Wear cycles.

This option features upgraded washing performance with low energy and water consumption.

Do not load delicates such as wool, silk, and easily discolored clothes.

2-10. DRUM LIGHT

The drum light comes on when the power button is pressed. It goes off when the door is closed

and the washer starts operation.

The drum light remains off when the door is locked.

The drum light can be turned on while the washer is in operation by pressing the DELAY WASH

button for 3 seconds. The light will turn off automatically 4 minutes later.

The drum light comes on when the washing cycle is finished and goes off 4 minutes later.

3. PARTS IDENTIFICATION

• If the supply cord is

damaged, it must be
replaced by the
manufacturer or its
authorized service
technician in order to
avoid a hazard.

ACCESSORIES

Wrench

Tie strap (Option)

to secure drain hose to standpipe,

inlet hose, or laundry tub

Hot/Cold (1 each)

Caps(4)

(for covering shipping 

bolt holes)

Elbow Bracket

(for securing drain hose)

Non-skid pads

Hose

Hoses (1 Hot and 1 Cold)