LG WM3001HPA Service Manual ▷ View online
56
MAIN PWB ASSEMBLY
Disconnect the POWER connector and
SENSOR SWITCH ASSEMBLY.
Remove the Protective cover.
Unscrew 1 screw on the back.
Remove the Main PWB.
Disconnect the connectors.
PROTECT COVER
1
2
3
4
5
57
DISPENSER ASSEMBLY
Disassemble the top plate assembly.
Pull out the drawer.
Push out the DISPENSER ASSEMBLY after
unscrewing 2 screws.
NOISE FILTER
Disassemble two (or three) connectors from
the NOISE FILTER.
Unscrew a screw from the TOP BRACKET.
Unscrew the Clamp nut at the lower part of the
dispenser.
Unscrew 2 screws from the back of the cabinet.
Disassemble the 4 connectors from the valves.
Wire Color
Blue Housing (YL-BK)
Red Housing (VT-BK)
White Housing (WH-BK)
Blue Housing (GY-BK)
Red Housing (BL-BK)
1
2
3
4
5
DRAWER
1
3
2
4
5
6
1
2
58
CABINET COVER
Unscrew the 5 screws from upper of the
cabinet cover.
Unscrew the screw from filter cover.
Put a flat ( - ) screwdriver or putty knife into the
hinge slots at the bottom of the cover and pry
it out.
Unscrew the screw from the lower side of the
cabinet cover.
1
2
3
4
59
Open the door.
Disassemble the clamp assembly.
Tilt the cabinet cover.
Disconnect the door switch connector.
Disassemble the clamp assembly.
Disassemble the gasket.
Lift and separate the cabinet cover.
NOTE : When assembling the
CABINET COVER, connect the door switch
connector.
5
6
7
8
9
10
11
Click on the first or last page to see other WM3001HPA service manuals if exist.