LG WM2688HWMA Service Manual ▷ View online
3
6
PUMP
HEATER
①
①
Disassemble the cabinet cover.
②
②
Separate the pump hose, the bellows
and the circulation hose assembly from the
pump assembly.
pump assembly.
③
③
Disassemble the pump assembly in arrow
direction.
①
①
Disassemble the cabinet cover.
②
②
Separate 2 connectors from the heater.
③
③
Loosen the nut and pull out the heater.
※
※ CAUTION
• When assembling the heater, insert the
heater into the heater clip on the bottom of
the tub.
the tub.
• Tighten the fastening nut so the heater is
secure.
3
7
WHEN FOREIGN OBJECT IS STUCK BETWEEN DRUM AND TUB
①
①
Disassemble the cabinet cover.
②
②
Separate the heater from the tub.
③
③
Remove any foreign objects (wire, coin, etc.) by
inserting a long bar in the opening.
LAMP ASSEMBLY
TOP PLATE ASSEMBLY
①
① Unscrew 2 screws on the back of the top plate.
②
② Pull the top plate backward and upward as shown.
③
③ Disconnect the connector.
Disassemble the lamp assembly.
3
8
MOTOR/DAMPER
①
①
Disassemble the back cover.
②
②
Remove the bolt.
③
③
Pull out the Rotor.
①
①
Unscrew the 2 screws from the tub bracket.
②
②
Remove the 6 bolts on the stator.
③
③
Unplug the 2 connectors from the stator.
①
①
Disassemble the damper hinges from the tub
and base.
②
②
Separate the dampers.
※
※ NOTE
• Once removed, replace the damper with
new one.
3
9
①
①
To check out the fault diagnosis of TSG, in case
of removing the water inside, you can pull out
the plug and let the water drain away.
the plug and let the water drain away.
②
②
Be cautious in case of the TSG is hot
temperature.
temperature.
①
①
Remove the housing coupled the TSG
(Heater, Water level frequency-sensor,
Thermistor)
(Heater, Water level frequency-sensor,
Thermistor)
②
②
Taking out the screw of the TSG and Body
Frame.
Frame.
Checking the TSG (TURBO STEAM GENERATOR)
TSG (TURBO STEAM GENERATOR)
Click on the first or last page to see other WM2688HWMA service manuals if exist.