LG WM2233CS Service Manual ▷ View online
9
9
■ HOW TO CONNECT THE INLET HOSE
Verify that the rubber washer is inside of the
valve connector.
Tighten the inlet hose securely to prevent leaks.
■ CONNECT THE DRAIN HOSE
■ CONNECT POWER PLUG
※ The end of the drain hose should be placed less than 96” from the floor.
· Connect the power plug to the wall outlet.
· Avoid connecting several electric devices, as
doing so may cause a fire.
WASH
WASH,
EST. TIME
EST. TIME,
SPIN
SPIN,
WASH
WASH,
EST. TIME
EST. TIME
,
SPIN
SPIN,
WASH
WASH,
EST. TIME
EST. TIME
,
SPIN
SPIN,
· Make sure that the hose is not twisted.
· Avoid submerging the end of the hose.
10
SOFTENER
MAX
WASH
WASH,
EST. TIME
EST. TIME,
SPIN
SPIN,
WASH
WASH,
EST. TIME
EST. TIME,
SPIN
SPIN,
WASH
WASH,
EST. TIME
EST. TIME
,
SPIN
SPIN,
TEST OPERATION
Connect the power plug to
the outlet.
Connect the inlet hoses.
the outlet.
Connect the inlet hoses.
Power off and the power on.
Press the SPIN SPEED button.
Press the START/PAUSE button.
Check the spin and drain
functions.
Press the SPIN SPEED button.
Press the START/PAUSE button.
Check the spin and drain
functions.
Listen for a click to determine
if the door is unlocking.
if the door is unlocking.
Listen for a click to determine if
the door has locked.
the door has locked.
If SVC is needed during check,
remove the remaining water by
pulling out the hose cap.
remove the remaining water by
pulling out the hose cap.
Preparation for
Press the POWER button.
Press the Start/Pause
washing.
button.
Press the WASH/RINSE button
Check if the drum rotates
Check if water is supplied
and the present temperature will
clockwise and counterclockwise.
through the detergent dispenser.
be displayed.
Check the water
Check the automatic
Check the water supply.
temperature.
reverse rotation.
Check the drain and spin
Press the
Water removal
functions.
START/PAUSE button.
11
5. OPERATION
WM2133C*
12
Delay Wash, Water Plus/*Spinsense, Extra Rinse
• Delay Wash allows the start of any cycle to be delayed for 1~9 hours
• Water Plus adds extra water to the wash and rinse cycles for
• Water Plus adds extra water to the wash and rinse cycles for
superior results
• Extra rinse Provides an additional rinse
POWER button
• Use this button to turn
power On/Off.
START/PAUSE button
• Use this button to
start/stop the washer.
OPTION button
• Prewash: Use this option for loads that need
pretreatment.
It adds 16 minutes prewash and drain.
It adds 16 minutes prewash and drain.
• Rinse + Spin: Use this option to rinse and
then spin.
• Quick Cycle: The Quick offers a quick cycle
time.
• Stain Cycle: Add time to the wash and rinse for
better stain removal. Automatically provide a rinse.
• Tub Clean: ? (Use this option to clean tub.)
CYCLE SELECTOR
• Rotate the cycle selector knob
to select the cycle designed for
different types of fabric and
soil level.
different types of fabric and
soil level.
Wash, Rinse temp., Spin speed, Soil Level, Beeper Button.
• Select a water temperature based on the type of load you are washing.
• To change the spin speed, press the Spin Speed button repeatedly
• To change the spin speed, press the Spin Speed button repeatedly
to cycle through available options.
• To change the soil level, press the Soil Level button repeatedly until
the desired setting is on.
• Press Repeatedly to adjust the Volume
DOOR LOCKED lamp
• Light whenever the door of the washer is locked.
• The door can be unlocked by pressing the Start/Pause
• The door can be unlocked by pressing the Start/Pause
button to stop the washer.
EST. TIME REMAINING
• This display shows:
a) the estimated time remaining
in the cycle when operation.
b) an error code when an error
has been detected.
5. OPERATION
Click on the first or last page to see other WM2233CS service manuals if exist.