LG WM2233CS Service Manual ▷ View online
12
Delay Wash, Water Plus/*Spinsense, Extra Rinse
• Delay Wash allows the start of any cycle to be delayed for 1~9 hours
• Water Plus adds extra water to the wash and rinse cycles for
• Water Plus adds extra water to the wash and rinse cycles for
superior results
• Extra rinse Provides an additional rinse
POWER button
• Use this button to turn
power On/Off.
START/PAUSE button
• Use this button to
start/stop the washer.
OPTION button
• Prewash: Use this option for loads that need
pretreatment.
It adds 16 minutes prewash and drain.
It adds 16 minutes prewash and drain.
• Rinse + Spin: Use this option to rinse and
then spin.
• Quick Cycle: The Quick offers a quick cycle
time.
• Stain Cycle: Add time to the wash and rinse for
better stain removal. Automatically provide a rinse.
• Tub Clean: ? (Use this option to clean tub.)
CYCLE SELECTOR
• Rotate the cycle selector knob
to select the cycle designed for
different types of fabric and
soil level.
different types of fabric and
soil level.
Wash, Rinse temp., Spin speed, Soil Level, Beeper Button.
• Select a water temperature based on the type of load you are washing.
• To change the spin speed, press the Spin Speed button repeatedly
• To change the spin speed, press the Spin Speed button repeatedly
to cycle through available options.
• To change the soil level, press the Soil Level button repeatedly until
the desired setting is on.
• Press Repeatedly to adjust the Volume
DOOR LOCKED lamp
• Light whenever the door of the washer is locked.
• The door can be unlocked by pressing the Start/Pause
• The door can be unlocked by pressing the Start/Pause
button to stop the washer.
EST. TIME REMAINING
• This display shows:
a) the estimated time remaining
in the cycle when operation.
b) an error code when an error
has been detected.
5. OPERATION
13
6. WIRING DIAGRAM/PROGRAM CHART
Base/Line
MEZ31823218
WM2133C*
14
*
32
14
49
49
15
48
48
14
26
26
8
8
19
Cool-down
**Approx.
(Minutes)
* Wash time is in minutes.
** The total working time will vary with the load size,
water temperature and ambient temperature.
** The total working time will vary with the load size,
water temperature and ambient temperature.
15
7. TROUBLESHOOTING
7-1. BEFORE PERFORMING SERVICE
■ Be careful of electric shock when disconnecting parts while troubleshooting.
■ The voltage of each terminal is 120 V AC and DC when the unit is plugged in.
■ The voltage of each terminal is 120 V AC and DC when the unit is plugged in.
7-2. QC TEST MODE.
The washer must be empty and the controls must be in the off state.
1. Press the SPIN SPEED and SOIL LEVEL buttons simultaneously.
2. Press the Power button, while the above condition. Then buzzer will sound twice.
3. Press the Start/Pause button repeatedly to cycle through the test modes.
4. Alternate blinking of and
7-3. HOW TO CHECK THE WATER LEVEL FREQUENCY
Press the Delay and Beeper button simultaneously.
So, for example a display indicating 241: a Water level frequency of 241 x.1 kHz
= 24.1 kHz
The digits indicate the water level frequency ( x.1 kHz ).
Check Point
Display Status
None
Turns on all lamps and locks the door.
1 time
Tumble clockwise.
rpm (40~50)
2 times
Low speed Spin.
rpm
3 times
High speed Spin.
rpm
4 times
Inlet valve for prewash turns on.
Water level frequency (25~65)
5 times
Inlet valve for main wash turns on.
Water level frequency (25~65)
6 times
Inlet valve for hot water turns on.
Water level frequency (25~65)
7 times
Inlet valve for bleach turns on.
Water level frequency (25~65)
8 times
Tumble counterclockwise.
rpm (40~50)
9 times
Water temperature (Thermistor)
Water temperature [°C]
10 times
Drain pump turns on.
Water level frequency (25~65)
11 times
Power off and unlock the door.
Turn off all lamps.
Number of times the
Start/Pause button is pressed
1)
1)
1)
1) : WM2016CW /
: WM2233H*
Click on the first or last page to see other WM2233CS service manuals if exist.