LG WM2233CS Service Manual ▷ View online
6
2-5. THE DOOR CAN NOT BE OPENED
● While program is operating
● When a power failed and power plug is taken out in operation
● While Door Lock lights turn on.
● White the motor is in the process of intertial rotating, through the operation is paused.
● When a power failed and power plug is taken out in operation
● While Door Lock lights turn on.
● White the motor is in the process of intertial rotating, through the operation is paused.
2-6. DOOR LOCKED LAMP LIGHTS
● When the frequency of water level is lower than 22.9 kHz
(It can be canceled when the frequency is more than 23.8 kHz)
● When the temperature inside the tub is higher than 45 °C and water level is not 25.5 kHz
(It can be canceled when the water level is 25.5 kHz or the temperature inside the tub is lower than 40 °C)
2-7. CHILD LOCK
● Use this option to prevent unwanted use of the washer. Press and hold OPTION button for 3 seconds to
lock/unlock control.
● When Child lock is set, “ ” blinks and all buttons are disabled except the Power button. You can lock
the washer while it is operating.
7
3. PARTS IDENTIFICATION
W H
S
A H
S
A
W
EST. T
IMEE
M
I
T
.
T
S
E
N
I
P
S N
I
P
S
ACCESSORIES
Wrench
Tie strap (Option)
to secure drain hose to standpipe,
inlet hose, or laundry tub
Hot/Cold (1 each)
Hose
Non-skid pads
Caps(4)
(for covering shipping
bolt holes)
Elbow Bracket
(for securing drain hose)
8
1⃞ Before servicing, ask the customer what the trouble is.
2⃞ Check the setup (power supply is 120 V AC, remove the transit bolts....).
3⃞ Check with the troubleshooting guide.
4⃞ Plan your service method by referring to the disassembly instructions.
5⃞ Service the unit.
6⃞ After servicing, operate the appliance to see whether it functions correctly.
2⃞ Check the setup (power supply is 120 V AC, remove the transit bolts....).
3⃞ Check with the troubleshooting guide.
4⃞ Plan your service method by referring to the disassembly instructions.
5⃞ Service the unit.
6⃞ After servicing, operate the appliance to see whether it functions correctly.
■ STANDARD INSTALLATION
The appliance should be installed as follows:
REMOVE THE SHIPPING
INSTALL THE APPLIANCE
ADJUST THE
BOLTS
ON A FLAT AND FIRM SURFACE
LEVELING
Remove the 4 shipping bolts
Turn the leveling feet to adjust
with the supplied wrench.
the appliance.
※ Do first lower side to remove easily.
Keep the shipping bolts and
spanner for future use.
Insert the 4 caps
(provided) into the hole.
Turn clockwise to raise;
counterclockwise to lower.
4. INSTALLATION & TEST
WASH
WASH
EST. TIME
EST. TIME
SPIN
SPIN
9
9
■ HOW TO CONNECT THE INLET HOSE
Verify that the rubber washer is inside of the
valve connector.
Tighten the inlet hose securely to prevent leaks.
■ CONNECT THE DRAIN HOSE
■ CONNECT POWER PLUG
※ The end of the drain hose should be placed less than 96” from the floor.
· Connect the power plug to the wall outlet.
· Avoid connecting several electric devices, as
doing so may cause a fire.
WASH
WASH,
EST. TIME
EST. TIME,
SPIN
SPIN,
WASH
WASH,
EST. TIME
EST. TIME
,
SPIN
SPIN,
WASH
WASH,
EST. TIME
EST. TIME
,
SPIN
SPIN,
· Make sure that the hose is not twisted.
· Avoid submerging the end of the hose.
Click on the first or last page to see other WM2233CS service manuals if exist.