DOWNLOAD LG WFW1532EK Service Manual ↓ Size: 12.79 MB | Pages: 55 in PDF or view online for FREE

• Use to turn the power on or off. 
• Push again and power goes on or off 
• The power goes off automatically about 10

seconds after the wash is finished.

• This button allows you to select

the strength of the wash action.  

• Power option selections light up

in sequence as follows Medium

Heavy     Light     Medium as

the button is pushed. 
This can be selected for any
program, but when washing
Heavy, it starts with Heavy. 

• Adjustment can be made

while washing. 

• This button

allows you to
store a
customized
wash cycle for
future use . 

* For optimizing the washing algorithm, the displaying time may be changed during washing-increased by 8minutes at

maximum and decreased by 4 minutes at maximum. 

* If the Detergent quantity is put more than the standard, for increasing the rinsing performance, it automatically adds

rinsing, and the remaining time may be increased.

* The standard detected by the sensor changing the algorithm is set by the normal standard. It may not be same to the

washing habit of a specific user. So, it does not matter that the user uses it according to her/his washing habit.

• It only operates in FUZZY Program.
• During being detected by the sensor, the LED flashes green, orange and

red in turn. And, after detecting, the LED lights a specific color according to
the detecting condition as follows: 

If the current washing condition (Detergent quantity, Water Temperature,
water quality, etc.) is determined as better than the standard one, it
optimizes the algorithm to save the energy by decreasing washing
time/strength,  and the LED automatically turns to red.
If the current washing condition is determined as worse than the standard
one, it optimizes the algorithm by increasing washing time/strength, and
the LED automatically turns to orange.
If the current washing condition is determined as equal to the standard
one, the algorithm has no change and the LED turns to green.

• These buttons can be selectable for

every program.

• Soak : It gives additional 30 min Soak.

(Except for Wool, Delicate,
Rinse/Spin, Spin Only)  

• Spin Hold: It gives gentle spin instead

of normal spin (Except for Wool,
Delicate, Wash Only)  

• Use to set a delayed finishing time. 
• The time increases when the button is pushed.
• The following settings are indicated as the button

is pushed 3     4     5     ... 11     12     14

16     ...46     48     3 HOUR.

• To cancel delay time, turn the power switch off. 

17

This button allows you to adjust the volume
of the Beeper.
Beeper selection light up  in sequence as
follows: Low 

High 

Off  

Low

Use to start or pause the washing
process. 
Repeats start and pause by pushing
the button.

Use for selecting wash
program. 
This button allows you to
select 10 different
programs for different
kinds of laundry and
dirtiness. 
Program selections light
up in sequence as
follows: Fuzzy 

Hand

wash  

Heavy  

Delicates 

Wool  

Eco Save 

Wash Only

Quick Wash 

Rinse/Spin 

Spin only

Fuzzy etc. 

Select the desired
program by pressing the
button.

Use to select the
proper amount of
water in relation to the
weight and type of
laundry.
Controlled
automatically
programs.

Use to select Water (Wash
/Rinse) Temperature.
Pressing the button allows
you to select Cold/Cold 
Warm/Cold 

Hot/Cold 

Hot/Warm 

Warm/Warm

Cold/Cold respectively.

Default setting is
Cold/Cold. 

Use to lock or unlock the control
buttons to prevent settings from
being changed by a child. 
To lock, push the SOIL LEVEL and
WATER TEMP. buttons
simultaneously and  to unlock push
them one more time during the
washing process. 

* The sensor for a Detergent quantity is designed to detect based on a synthetic Detergent powder. If you put a liquid one or

a natural one or too much bleaching agent, the detecting ability of the sensor may be decreased.

* Even if the water level or the water temperature are changed by the user in FUZZY(Normal) Program, 

the sensor will still work. The sensor algorithm may differ according to models.

* The control panel may differ according to different models.

18

Used for normal loads, this mode
automatically selects the most
appropriate conditions and
completes the sequence in one
operation. The built-in sensor
detects the size of the load and the
ideal wash power and wash, rinse
and spin times are set accordingly.

Use this mode when washing
lightly soiled clothes for a short
time. The highly recommended
laundry amount is under 2.0 kg.

Use this program for washing delicate
fabrics such as lingerie and woolens.
(wash only “water washable” clothes)
Before washing your woolens check
the care label for the washing
instructions. (wash only water
washable clothes)

Eco Save is the economical
program to minize water
consumption.

Use Heavy program when
washing Jeans of different sizes.

Spread
the
heavy
evenly in
the tub.

Select the
Quick Wash
program on
the Control
panel

The detergent
should be used
according to the
instrucion of the
detergent
manufacture.

The detergent should
be used according to
the instrucion of the
detergent
manufacture.

Use neutral
Detergent
appropriate for the
laundry.
When washing
woolens use a mild
Detergent
recommended for
washing wool.

Select the
Heavy
program on
the Control
panel

Select the
Eco Save
program on
the Control
panel

19

If water is already in the tub, or putting wet laundry
into the tub before starting will increase the
WATER LEVEL.
With lightweight bulky loads, WATER LEVEL can
be set low.
Changes to Water Temperature  and wash level
are possible during operation.

When setting the WATER LEVEL manually, do
not set to Medium to prevent damage to laundry.
Washing with HOT water may damage the
laundry .
Ensure that the load is under 2kg. 
In order to avoid damage to laundry, the spin cycle
may appear slow.
This also avoids wrinkles and clothing may still
contain some water. This is normal.

Eco Save can handle all types of clothes the
Fuzzy(Normal) course can do.

The pulsator rotates for
8 seconds to detect the
laundry load.
Then the WATER
LEVEL will be shown
and water will be
supplied.

Water will be suplied
for 2 minutes after the
start of the jwash to
supplemnet the water
the laundry has
absorbed.

When the wash
program endsm the
buzzer will ring for 10
seconds before the
Poweer goes off
automatically.