LG WFS2018EKD Service Manual ▷ View online
25
4) TUB CLEAN
If scrud is allowed to build-up in the machine it can result in stains on your clothes or unpleasant smell in your washer.
Scrud is the way build-up that can occur within any washer when the fabric softener comes into contact with
Detergent, and according to particular degree of dirtiness or quality of water to be use, in these case, use this
program to clean inner tub and outer tub.
Scrud is the way build-up that can occur within any washer when the fabric softener comes into contact with
Detergent, and according to particular degree of dirtiness or quality of water to be use, in these case, use this
program to clean inner tub and outer tub.
1
Press the POWER (AUTO OFF) button to turn power on.
2
Press the PROGRAM button to select the TUB CLEAN program.
3
Press the START/PAUSE button.
5
Close the lid.
• When the lid is open the machine will not operate,
and an alarm signal will remind you to close the lid.
• Do not use Detergent box.
• Do not place any laundry inside tub.
• Do not place any laundry inside tub.
• Left time is displayed.
4
After 10 minutes of water supplement. Add the oxygenated bleach (about 300 m ).
• Before using this program remove lint inside lint filter.
• When using this program, do not place any laundry inside tub.
• This program takes about 3 hours to be completed.
• After using this program, remove dirt inside filter.
• After finishing this program, open the lid of wash to remove irritant odor.
• Do not pour bleach into the tub directly. It might cause damage the tub.
• Do not leave diluted oxygenated bleach inside tub for long time.
• When using this program, do not place any laundry inside tub.
• This program takes about 3 hours to be completed.
• After using this program, remove dirt inside filter.
• After finishing this program, open the lid of wash to remove irritant odor.
• Do not pour bleach into the tub directly. It might cause damage the tub.
• Do not leave diluted oxygenated bleach inside tub for long time.
It rusts the tub must drain the remained diluted oxygenated water out.
• Use this program once for every month.
• Do not use this program repeatedly.
• Do not use this program repeatedly.
NOTE
26
5) DELAY START (RESERVATION) Wash
DELAY START (RESERVATION) Wash is used to delay the finishing time of the operation.
The hours to be delayed can be set by the user accordingly.
The time on the display is the finishing time, not the start time.
The hours to be delayed can be set by the user accordingly.
The time on the display is the finishing time, not the start time.
• Finishing time can be delayed from 3~48 hours. Delaying from 3~12 hours can be done in 1 hour time
intervals and from 12~48 hours in 2 hour time intervals.
• If the lid is open, the machine will not work, and an alarm signal will alarm to remind you to close the lid.
• To select washing time, rinsing times, spinning time, water level, hot/cold or wash power manually, press the
• To select washing time, rinsing times, spinning time, water level, hot/cold or wash power manually, press the
DELAY START (RESERVATION) button and select the desired option. Then press the START/PAUSE button.
• When the laundry cannot be taken out immediately after the wash program ends, it is better to omit the
spinning program. (The laundry will be wrinkled if left for a long time after spinning.)
NOTE
1
Press the POWER (AUTO OFF) button to turn power on.
2
Press the PROGRAM button to select the washing program.
3
Press the DELAY START (RESERVATION) button.
4
Add the Detergent.
5
Add the laundry and press the START/PAUSE button.
• Select the program for laundry on the Control panel.
This program will not work in WOOL and TUB CLEAN Program.
• The light will ‘DELAY’ turn on and ‘TIME LEFT’ will be
marked.
• Press the button repeatedly to set the desired finishing time.
For example, To finish washing in 9 hours from now, by make the
number 9:00 pressing the DELAY START (RESERVATION) button
repeatedly. (RES.=DELAY)
number 9:00 pressing the DELAY START (RESERVATION) button
repeatedly. (RES.=DELAY)
• Add the appropriate quantity of Detergent as the Detergent
manufacture instruction.
• When the lid is open the machine will not operate, and an
alarm signal will remind you to close the lid
• When you press the START/PAUSE button the light will blink.
6
Close the lid.
Finish
• Water will be supplied for 2 minutes after the start of the wash to
supplement the water the laundry has absorbed.
• The washing will be finished according to the delayed time.
27
• When the Air dry is selected other buttons will be inactive.
• If you want to cancel the Air dry function, press the Power button.
• If you want to cancel the Air dry function, press the Power button.
6) AIR DRY
7) TUB DRY
AIR DRY for your laundary.
1
Press the POWER (AUTO OFF) button to turn power on.
2
When you press the Air dry button for 3 seconds, the Air dry course will be selected.
4
When the Complete buzzer goes off, the power will automatically be turned off in 10 seconds.
3
Press the START/PAUSE button.
When you select Air dry foir more than 60 minutes
1) You can reduce the drying time by minimizing the moisture in the laundry.
2) Always keep the laundry amount to 2kg or less and make sure to spread it out evenly.
3) Select 60 minutes for cotton laundry and 120 minutes for synthetic fiber laundry for effective moisture removal.
1) You can reduce the drying time by minimizing the moisture in the laundry.
2) Always keep the laundry amount to 2kg or less and make sure to spread it out evenly.
3) Select 60 minutes for cotton laundry and 120 minutes for synthetic fiber laundry for effective moisture removal.
NOTE
• When you select the Tub Dry, do not put any laundry in the drum.
• When Tub Dry is selected, other buttons will be inactive.
• When Tub Dry is selected, other buttons will be inactive.
1
Press the POWER (AUTO OFF) button.
2
When you press the Wash and Rinse button simultaneously, the Tub Dry course will be
set or canceled.
set or canceled.
4
When the Complete buzzer goes off, the poser will automatically be turned off in
10 seconds.
10 seconds.
3
Press the START/PAUSE button.
When you select Tub Dry
1) Use this function to minimize the growth of mold from the residual moisture within the laundry.
2) When you select the Tub Dry course, do not put any laundry or detergent in the drum.
3) It is good to use this about once a week.
1) Use this function to minimize the growth of mold from the residual moisture within the laundry.
2) When you select the Tub Dry course, do not put any laundry or detergent in the drum.
3) It is good to use this about once a week.
NOTE
28
8) Option Washing
When you only need the Wash, Wash/Rinse or Rinse cycles, these can be set manually.
Only Wash
Press the WASH button to
select the desired timing.
select the desired timing.
Press the RINSE button to
select the desired times of
rinse.
select the desired times of
rinse.
Press the SPIN button to
select the desired spin
duration time.
select the desired spin
duration time.
When you want to only drain,
wait until the water in the
washing tub drains
completely.
wait until the water in the
washing tub drains
completely.
Only Rinse
Only Spin
Only Wash,Rinse
Only Rinse,Spin
Only Drain
• When a Wash, Wash/Rinse or Rinse only option is selected, after the wash is completed the water will not be
drained off. If you wish to drain the water, press SPIN button and wait until the water in the tub has drained
completely. Then press the START/PAUSE button.
completely. Then press the START/PAUSE button.
• If you do not specify the water level, then Medium will be automatically selected.
• If only Rinse is selected, the process will start from Water Supply.
• If only Rinse is selected, the process will start from Water Supply.
NOTE
1
Press the POWER (AUTO OFF) button to turn power on.
2
3
Press the WATER LEVEL button, to control the water level according to the amount of
laundry. If you do not choose anything, it is set the middle water level automatically.
laundry. If you do not choose anything, it is set the middle water level automatically.
4
Add the laundry into the washing tub.
6
Add the detergent and close the lid.
5
Press the START/PAUSE button.
Press the WASH button to
select the desired timing.
select the desired timing.
Press the RINSE button to
select the desired times of
rinse.
select the desired times of
rinse.
You can use this option to
reduce the wrinkling of
garments
reduce the wrinkling of
garments
Press the RINSE button to
select the desired times of
rinse.
select the desired times of
rinse.
Press the SPIN button to
select the desired spin
duration time.
select the desired spin
duration time.
Click on the first or last page to see other WFS2018EKD service manuals if exist.