DOWNLOAD LG WF-T15D80EP Service Manual ↓ Size: 11.46 MB | Pages: 58 in PDF or view online for FREE

If water is already in the tub, or putting wet laundry
into the tub before starting will increase the
WATER LEVEL.
With lightweight bulky loads, WATER LEVEL can
be set low.
Changes to Water Temperature  and wash level
are possible during operation.

When setting the WATER LEVEL manually, do
not set to Medium to prevent damage to laundry.
Washing with HOT water may damage the
laundry .
Ensure that the load is under 2kg. 
In order to avoid damage to laundry, the spin cycle
may appear slow.
This also avoids wrinkles and clothing may still
contain some water. This is normal.

Eco Save can handle all types of clothes the
Fuzzy(Normal) course can do.

The pulsator rotates for
8 seconds to detect the
laundry load.
Then the WATER
LEVEL will be shown
and water will be
supplied.

Water will be suplied
for 2 minutes after the
start of the jwash to
supplemnet the water
the laundry has
absorbed.

When the wash
program endsm the
buzzer will ring for 10
seconds before the
Poweer goes off
automatically.

After the prewash of 10~15 minutes and draining, the washer will run to the normal wash cycle.

Press the POWER button to turn power on.

Press the PROGRAM button to select Hand Wash program.

Add the laundry into the washing tub.

Press the START/PAUSE button.

Add the Detergent and close the lid.

Hand Wash program takes longer washing time than Fuzzy(Nomal) program.

Fabric

Softner

Detergent for

main wash

Additives

Hand Wash (pre wash)

Use this program to wash items requring a GENTLE WASH action.
This would inciude blouses, nylons and dress shirts with light solied.

Press the POWER button to turn power on.

Press the PROGRAM button to select Delicates program

Press the START/PAUSE button.

Close the lid.

When the lid is open the machine will not operate, and an
alarm signal will remind you to close the lid. 

Left time is displayed.

Before starting to wash, make sure that the laundry is washable.
Washing with HOT water may damage the laundry.
Ensure that the load is under 2kg.

When you only need the Wash, Rinse/Spin or Spin cycles, these can be set manually.

Press the POWER button to turn power on.

Press the PROGRAM button for desired option.

Press the WATER LEVEL button. (Except for Spin Only)

Add the laundry into the washing tub.

When you want to only drain, wait until the water in the washing tub drains complettly
and then turn off the power

Control the water level according to the amount of laundry.

Press the START/PAUSE button.

Add the detergent (Except for Spin Only) if required and close the lid.

When spin option is not selected, the water will not be drained off after the process is completed.
When you want the water to drain only, wait until the water in the washing tub drains completely
and then turn off the power

Wash Only, Rinse / Spin, Spin Only : WFT11D80(1)EP / WF-T1477TP / WF-T1478TP /

WFT15D81EP

Spin Only : WFT10D80(1)EP / WF-T1277TP / WF-T1377TP