DOWNLOAD LG WF-G13KTC Service Manual ↓ Size: 4.61 MB | Pages: 63 in PDF or view online for FREE

• Remove stains promptly.
• Determine the kind of stain, then follow the recommended treatment in the stain

removal chart below.

• To pretreat stains, use a prewash product, liquid detergent, or a paste made from

granular detergent and water.

• Use cold water on unknown stains because hot water can set stains.
• Check care label instructions for treatments to avoid on specific fabrics.
• Check for colorfastness by testing stain remover on an inside seam.
• Rinse and wash items after stain removal.

Follow fabric care label 

instructions

■ Do not use or mix liquid chlorine bleach with other household chemicals such as toilet cleaners, rust removers, acid or products

containing ammonia. These mixtures can produce dangerous fumes which can cause serious injury or death.

■ To reduce the risk of fire or serious injury to persons or property, comply with the basic warnings listed below:

• Read and comply with all instructions on stain removal products.

• Keep stain removal products in their original labeled containers and out of children’s reach.
• Thoroughly wash any utensil used.
• Do not combine stain removal products, especially ammonia and chlorine bleach. Dangerous fumes may result.
• Never wash items which have been previously cleaned in, washed in, soaked in or spotted with gasoline, dry cleaning

solvents or other flammable or explosive substances because they give off vapors that could ignite or explode.

• Never use highly flammable solvents, such as gasoline, inside the home. Vapors can explode on contact with flames or

sparks.

STAIN

Adhesive tape, chewing gum,

rubber cement
Baby formula, dairy products, egg
Beverages (coffee, tea, soda,

juice, alcoholic beverages)
Blood

Candle wax, crayon

Chocolate
Collar or cuff soil, cosmetics
Dye transfer on white fabric
Grass

Grease, oil, tar (butter, fats, salad

dressing, cooking oils, car grease,

motor oils)

Ink

Mildew, scorch

Mud

Mustard, tomato

Nail polish

Paint, varnish

Rust, brown or yellow 

discoloration

Shoe polish

Apply ice. Scrape off excess. Place stain face down on paper towels. Saturate with prewash stain remover or

nonflammable dry cleaning fluid.
Use product containing enzymes to pretreat or soak stains.
Pretreat stain. Wash using cold water and bleach safe for fabric.

Rinse with cold water. Rub with bar soap. Or pretreat or soak with product containing enzymes. Wash using

bleach safe for fabric.
Scrape off surface wax. Place stain face down between paper towels. Press with warm iron until wax is

absorbed. Replace paper towels frequently. Treat remaining stain with prewash stain remover or

nonflammable dry cleaning fluid. Hand wash to remove solvent. Wash using bleach safe for fabric.
Pretreat or soak in warm water using product containing enzymes. Wash using bleach safe for fabric.
Pretreat with prewash stain remover or rub with bar soap.
Use packaged color remover. Wash using bleach safe for fabric.
Pretreat or soak in warm water using product containing enzymes. Wash using bleach safe for fabric.
Scrape residue from fabric. Pretreat. Wash using hottest water safe for fabric. For heavy stains and tar, apply

nonflammable dry cleaning fluid to back of stain. Replace towels under stain frequently. Rinse throughly.

Wash using hottest water safe for fabric.
Some inks may be impossible to remove. Washing may set some inks. Use prewash stain remover,

denatured alcohol or nonflammable dry cleaning fluid.
Wash with chlorine bleach if safe for fabric. Or, soak in oxygen bleach and hot water before washing. Badly

mildewed fabrics may be permanently damaged.
Brush off dry mud. Pretreat or soak with product containing enzymes.
Pretreat with prewash stain remover. Wash using bleach safe for fabric.
May be impossible to remove. Place stain face down on paper towels. Apply nail polish remover to back of

stain. Repeat, replacing paper towels frequently. Do not use on acetate fabrics.
WATER BASED : Rinse fabric in cool water while stain is wet. Wash. Once paint is dry, it cannot be removed,

OIL BASED AND VARNISH : Use solvent recommended on can label. Rinse throughly before washing.
For spots, use rust remover safe for fabric. For discoloration of an entire load, use phosphate detergent and

nonchlorine bleach. Do not use chlorine bleach because it may intensify discoloration.
LIQUID : Pretreat with a paste of granular detergent and water. PASTE : Scrape residue from fabric. Pretreat

with prewash stain remover or nonflammable dry cleaning fluid. Rub detergent into dampened area, Wash

using bleach safe for fabric.

TREATMENT

▶ Changing various functions is possible only in PAUSE state.

Selection button does not work when the washer is in operation (Except for water level, water temp, water power button).

■ Upon loading laundry, it

displays the correct amount of

detergent to be added

according to the amount of

laundry (based on 

concentrated detergent).

■ Use it to adjust the strength of

water current.

■ By pressing the button, it 

cycles
[                    ].

■ Strength of the water current can

be adjusted at any program.
At the beginning, it starts with
MED
(     ).

■ Indicates the current washing

status.

■ Next step is lit, current step blinks

and finished step is turned off.

■ Use this function for delayed

washing.

■ Use it to set the delay time.
■ By pressing the button, it cycles

[3

4

5

...

11

12

14

16

...

46

48

3] hours.

(Up to 48 hours can be
delayed).

■ To cancel delay time, turn the

power switch off.

■ By pressing the button, it cycles 

[LARGE

LARGE

EX-LARGE

EX-LARGE

SMALL

SMALL

MEDIUM

MEDIUM

MEDIUM

LARGE

LARGE]

■ At FUZZY and JEAN program, water level is selected automatically

based on the amount of laundry.

■ Water level is set to MEDIUM for SPEEDY program, LARGE for

WOOL and DELICATE program, EX-LARGE for BLANKET program.

■ Water level can be adjusted even when the washer

is in operation.

■ Use it to select hot or cold

water (When hot water only is

selected, hot water is supplied

for washing and cold water are

supplied for rinsing).

■ In WOOL, HOME DRY

program, cold water is selected

automatically (Hot water may

damage the fabric).

The display panel uses  the
following abbreviation: 
M(minutes), T(Times) and 
M(minutes).

■ In case of abnormal operation, the following indications are displayed.

Abnormal water supply : INLET Er. lamp blinks.

Abnormal drainage : DRAIN Er. lamp blinks.

Abnormal spin : SPIN Er. lamp blinks.

displayed.

Abnormal lid open : DOOR Er. lamp blinks.

displayed.

■ Use it to start or

pause temporarily.

■ Pressing the button

repeats start and
temporary pause.

■ After 10 minutes in a

temporary pause
state, the power will
automatically turn
off.

■ Use it to select washing

programs.

■ By pressing the button, it

cycles [ FUZZY(NORMAL)
BLANKET(DELICATE) 
ECONOMY(SPEEDY) 
JEAN 

WOOL 

HOME DRY(FAVOURITE)
FUZZY(NORMAL) ]

■ Wash :

Use it to change washing time.
By pressing the button[ 15min 
18min

21min

25min

40min

60min

90min

OFF

3min

6min

9min

12min

15min]SOAKING is used to

remove old or hardened dirt more
effectively.
Soaking time is about 40,60,90 minutes
(You cannot choose in WOOL , HOME
DRY, DELICATE program.).

■

■ Rinse :

Use it to change the frequency of rinses.
By pressing the button, 
[ rinse 1 

rinse 2 

rinse 3 

rinse 4 

rinse 5 

off 

rinse 1] or 

[ Spray rinse+Deep 1 

Deep 1 

Spray

rinse+Deep 2 

Deep 2

off 

Spray

rinse+Deep 1] are repeated. 

When you select rinse only, the 
operation starts with water supply.

■

■ Spin :

Use it to change the spinning time.

By pressing the button, 
[ 6min 

8min 

OFF 

1min

2min 

4min 

6min] 

When rinsing or spinning only, Fuzzy is set to
[LARGE] and ECONOMY is set to [MEDIUM]
and BLANKET is set to [EX-LARGE]
automatically. Adjust the water level as needed.

■ Use to lock or unlock the

control buttons to prevent
all the setting being change
by a child.

■ For locking, push both

buttons simultaneously and
for unlocking, push them
one more in washing
process.

Used for normal loads, this mode
automatically selects the most appropriate
conditions and completes the sequence in
one operation. The built-in sensor detects the
size of the load and the ideal wash power and
wash, rinse and spin times are set accordingly

Use this mode when washing lightly soiled
clothes for a short time. The weight should
be under 2.0kg.

Blankets of different size can be easily
washed.

Use jeans program when washing heavy,
thick, and extremely dirty laundry such as
jeans and work outfits.

Use this program for clothes that have
[HOME WASH and DRY] or [WATER
WASH and DRY] tags. For homedry,
amount of laundry must be less than 1.2kg
at a time.

Select the 
ECONOMY
(SPEEDY) program 
on the Control panel.

Select the
BLANCKET
program on the
Control panel.

Use this program for washing delicate
laundry such as lingerie, blouses etc.

Select the
DELICATE
program on the
Control panel.

Add the appropriate qua
detergent as indicated b
water level next to WAT
DETERGENT.
Or follow the detergent
manufacturer’s instructio

Select the JEAN
program on the
Control panel.

Select the
WOOL program
on the Control
panel.

Select the
HOMEDRY
program on the
Control panel.

Use this program for washing delicate fabrics
such as lingerie and woolens.
(wash only “water washable” clothes)
Before washing your woolens check the care
label for the washing instructions.(wash only
water washable clothes)

Use neutral detergent
appropriate for the laun
When washing woolen
a mild detergent
recommended for was
wool.

AUTO OFF