DOWNLOAD LG WF-G13KTC Service Manual ↓ Size: 4.61 MB | Pages: 63 in PDF or view online for FREE

Model
WF-G13KTC
Pages
63
Size
4.61 MB
Type
PDF
Document
Service Manual
Brand
Device
Washing Machine
File
wf-g13ktc.pdf
Date

LG WF-G13KTC Service Manual ▷ View online

20
3-5. OTHERS FUNCTIONS
1) Soak Wash
Use this mode for washing excessively dirty laundry by soaking in water for some time to remove proteins and
fats.
‘SOAK’mode can be used with all washing programs simultaneously except for WOOL and HOME DRY
program.
Note
AUTO OFF
The SOAK will not work in WOOL and  HOME DRY cleaning
Program.
The water level and the amount of detergent to be used will
be shown and water will be supplied.
Press the AUTO OFF (Power) button to turn power on.
Press the  PROGRAM button to select the washing program.
Add the laundry and press the START/PAUSE button.
When the wash program ends, the buzzer will ring for
10seconds before the Power goes off automatically.
Finish
Keep pressing the WASH button until 
the light turns on 
‘Soak’and ‘Wash’
simultaneously as next image.
SOAK program only works when
socking time is 40,  60 or 90 minutes. 
Press the WASH button, to select SOAK program.
The appropriate quantity of detergent marked next to the
water level of WATER-DETERGENT.
Add the detergent.
Water will  be supplied for 2 minutes after the start of the wash
to supplement the absorbed water by the laundry. 
Close the lid. 
PRO -
GRAM
WASH
SOAK
WASH
min
min
min
min
min
min
min
min
min
min
min
Lamp
Off
• Order of Soak-Wash timing
Soak-Wash
• Select soaking time 40minutes, 60minutes, or 90minutes (including washing time) by pressing the Wash
button repeatedly.  
• If  necessary, select the times of Rinse and the time for Spinning by pressing the Rinse or Spin buttons till
you reach the desired times. 
1
3
4
5
6
2
21
2) Delay Start (Reservation) Wash
5
Delay start (Reservation) Wash is used to delay the finishing time of the operation. The hours to be
delayed can be set by the user accordingly. 
The time on the display is the finishing  time , not  the start time. 
3
AUTO OFF
• Finishing time can be delayed from 3~48 hours. Delaying from3~12 hours can be done in 1 hour time intervals
and from 12~48 hours in 2 hour time intervals. 
• If the lid is open,  the machine will not work, and  an alarm signal will alarm to remind you to close the lid. 
• To select washing time, rinsing times, spinning time, water level, hot/cold or wash power manually, press the
DELAY START (RESERVATION) button and select the desired option. Then press the START/PAUSE button.
• When the laundry cannot be taken out immediately after the wash program ends, it is better to omit the spinning
program . (The laundry will be wrinkled if left for a long time after spinning.)
• When you press the START/PAUSE button the light will blink
and the time will be shown.
• Select the  program for laundry on the Control panel.
This method will not work in Wool Program.
Press the AUTO OFF (Power) button to turn power on.
Press the PROGRAM button to select the washing program.
Add the laundry and press the START/PAUSE button.
• The light will ‘ DELAY’ turn on and ‘TIME  LEFT’
will be marked.
• Press the button repeatedly to set the desired finishing
time.  For example, To finish washing in 9 hours from
now,  by make the number 9:00 pressing the DELAY
START (RESERVATION ) 
button repeatedly.
Press the DELAY START (RESERVATION) button.
• The appropriate quantity of detergent marked next to the water
level of WATER-DETERGENT.
• When the lid is open the machine will not operate, and an alarm
signal will remind you to close the lid.
Add the detergent.
• Water will  be supplied for 2 minutes after the start of the
wash to supplement the water the laundry has absorbed.
Close the lid. 
The washing will be finished according to the delayed time.
SOAK
SPIN
RINSE
SPRAY
WASH
DELAY
INLET Er.
DRAIN Er.
DOOR Er.
SPIN Er.
TIME
LEFT
SOAK
SPIN
RINSE
SPRAY
WASH
DELAY
INLET Er.
DRAIN Er.
DOOR Er.
SPIN Er.
TIME
LEFT
I
D
D
S
Finish
PRO -
GRAM
DELAY
START
Note
1
2
4
6
(RES.=DELAY)
22
3) Option Washing
Press the AUTO OFF (Power) button to turn power on.
Press the WASH button to select the
desired timing.
Add  the laundry into the washing tub.
Press the START/PAUSE button.
Press  the  WATER LEVEL button,  to  control  the  water  level  according  to
the amount of laundry. If you do not choose anything, it is set the middle
water level automatically.
Add the detergent and close the lid.
When you only need the Wash, Wash/Rinse or Rinse cycles, these can be set manually.
WASH
Press the WASH button to select the
desired timing.
Press the RINSE button to select the
desired times of rinse.
You can use this option for preventing
wrinkles of laundry 
WASH
AUTO OFF
RINSE
Only Wash
Only Wash,Rinse
1
2
3
4
5
6
23
3) Option Washing
2
Press the RINSE button to
select the desired times of
rinse.
Press the SPIN button to
select the desired times of
rinse.
Press the AUTO OFF (Power) button to turn power on.
Add the laundry into the washing tub.
Press the START/PAUSE button.
Add the detergent and close the lid.
AUTO OFF
When a Wash, Wash/Rinse or Rinse only option is selected, after the wash is completed the water will not
be drained off. If you wish to drain the water, press SPIN button and wait until the water in the tub has drained
completely. Then press the START/PAUSE button.
If you do not specify the water level, then Medium will be automatically selected.
If only Rinse is selected, the process will start from Water Supply.
Note
RINSE
Only Rinse,Spin
Press the RINSE button
to select the desired
times of rinse.
Press  the  WATER LEVEL button  to  control  the  water
level according to the amount of laundry.
Only Rinse
Press the SPIN button to
select the desired times
of rinse.
When you want to only
drain, wait until the water
in the washing tub drains
completely.  
Only Spin/Only drain
PRO -
GRAM
RINSE
SPIN
1
3
4
5
6
Page of 63
Display

Click on the first or last page to see other WF-G13KTC service manuals if exist.